Saturday 30 November 2013

Minx - PTU

I am using the art of Pandora Creations which you can find HERE
I am using the PTU Scrapkit Minxy Babe made to match the tube by PO Concept which you can find HERE
Mask of Choice
Font of Choice

Filters used:
Xero - Radiance - 191, 155, 182, 88

Open a new image 600x600
Open Element 57 and paste as a new layer - Position in the centre
Open Element 80 - Resize by 85 - Sharpen and place in the centre
Open Element 5 - Resize by 55 - Sharpen - Position on the top left - Duplicate - Image - Mirror and merge down - Duplicate - Image - Flip and Merge down
Open Element 55 and paste as a new layer - resize by 80 - Sharpen and position toward the bottom
Open Element 15 and paste as a new layer - resize by 70 - Sharpen - Position on the bottom right - Duplicate - image - mirror and merge down
Open Element 74 and paste as a new layer - Resize by 60 - Sharpen - Place at the top
Open Element 10 and paste as a new layer - Resize by 70 - Sharpen - Place in the centre
Open Element 42 - Resize by 40 - Sharpen - Place on the bottom right - Duplicate - Image - Mirror and merge down
Open Element 23 - resize by 35 - Sharpen - Place on the top left - Duplicate - image - mirror and merge down - Duplicate - Image - flip and merge down
Open your tube and paste as a new layer - Position in the centre - Resize if necessary and apply radiance at the settings above
Open Element 47 - Position on the bottom of the tube
Open Element 11 and paste as a new layer - resize by 40 - Sharpen and position on the right of the previous layer - duplicate - image - mirror and merge down - Move under the sign

Open Paper 4 and paste as a new layer - send to the bottom and apply a mask of choice - merge down
Add drop shadows to your layers - merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Black Rose - PTU

I am using the art of Anna Marine which you can find HERE
I am using the PTU IB Anna Marine 7-2 by ChiChi Designz which you can find HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Brush 2 and paste as a new layer - Position in the centre
Open Arch and paste as a new layer - Resize by 80 - Sharpen
Position in the centre
Open Sparkles and paste as a new layer - Resize by 80 - Sharpen and position at the top - Duplicate and move below the original - Merge down
Open Branch and paste as a new layer - Position on the left - Resize by 80 - Sharpen - Duplicate - Image - Mirror and Merge down
Open Vines and paste as a new layer - Resize by 90 - Sharpen - Place on the right - Duplicate - Image - Mirror and Merge down
Open Roses and paste as a new layer - resize by 60 - Sharpen and position on the bottom left - Duplicate - Image - Mirror and Merge Down
Open Butterflies 2 and paste as a new layer -Place in the centre
Open your tube and paste as a new layer - Position in the centre
Open Scenery and paste as a new layer - resize by 70 - Sharpen and position on the bottom
Open Fog - resize by 60 - Sharpen - Position toward the bottom
Open Crow and paste as a new layer - resize by 40 - Sharpen and position on the bottom right
Open WordArt Shadowed and paste as a new layer - Resize by 70 - Sharpen and position on the bottom

Open Paper 3 and paste as a new layer - Send to the bottom and apply a mask of choice - merge group
Add drop shadows to your layers - merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your  name - Save again - Done

Friday 29 November 2013

Love Glitter - PTU

I am using the art of Vika Misticheskaya which you can find HERE 
I am using the PTU Scrapkit Silver N Gold by AmyMarie and you can find this HERE 
Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 58 and paste as a new layer
Resize by 80 - Sharpen - Position on the top - Duplicate - Move in the centre - Duplicate and move to the bottom - Merge these layers visible
Open Element 14 and paste as a new layer - Position on the top left
Open Element 44 and paste as a new layer - resize by 80 - Sharpen and position in the centre
Open Element 49 - Resize by 80 - Sharpen - Position at the top and move under the frame
Click inside the frame with your magic wand - Selections - Modify - Expand by 5 - Open your tube and paste as a  new layer - When happy - Duplicate and hide for now - Selections - Invert - Delete - Select none and move under the frame - Unhide the duplicated tube and position at the top - Erase the overhanging parts
Click on the frame - Open Element 29 and paste as a new layer - Position toward the top
Staying on the frame layer - Open Element 51 - resize by 70 - Sharpen and position on the right of the frame - Duplicate - Image - Mirror and Merge down
Open Element 64 and paste as a new layer - resize by 40 - Sharpen - Position on the bottom right - Duplicate - Image - Mirror and merge down
Open Element 48 and paste as a new layer - resize by 70 - Sharpen and position on the top left - Duplicate - Image - Mirror - Merge down
Open Element 85 - Image - Mirror - resize by 40 -Sharpen - position on the top right
Open Element 101 and paste as a new layer - resize by 40 - Sharpen and position on the left of the frame slightly above the bottom
Open Element 112 and paste as a new layer - resize by 60 - Sharpen and position on the bottom right of the frame - Move under the tube
Open Element 110 and paste as a new layer - resize by 50 - Sharpen - Position on the bottom left
Open Element 63 and paste as a new layer - Resize by 50 - Sharpen and position on the bottom

Open Paper 3 and paste as a new layer - Send to the bottom and apply a mask of choice - merge group
Open Paper 4 - Position above the previous layer - Apply the same mask of choice - Merge group and resize by 85 - Sharpen
Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Black Friday Commission Sale by Pandora


PANDORA-CREATIONS COMMISSIONS: OPEN
Full body for Black Friday: 30 €
Half Body for Black Friday: 20 €
Only 2 colors. Each color more than this has a cost of 3€.
More Info: pandora.creations.art@gmail.com
(from 29 Nov. to 02 Dec.)

Maid in PSP - PTU

I am using the art of PinUpToons which you can find HERE 
I am using the PTU Scrapkit PUT pack 166 Bundle Pack by Ladyhawwk Designs which you can find HERE 
Mask of Choice
Font of Choice

This is tut 3 of 3 using the package

Open a new image 600x600
Open Frame 7 and paste as a new layer - Resize by 90 - Sharpen and position on the left
Open Element 59 - Image - Mirror - Resize by 60 - Sharpen and position on the left of the frame
Open Frame 6 - resize by 70 - Sharpen and position along the bottom
Click inside all of the frames with your magic wand - Selections - Modify - Expand by 5
Open Paper 14 and paste as a new layer - Selections - Invert - Delete - Select none and move under the frame
Open Element 67 - Resize by 50 - Sharpen and position on the bottom
Open Element 65 and paste as a new layer - Resize by 35 - Sharpen and position on the top right of the filmstrip frame
Open Element 9 - Resize by 80 - Sharpen - Position in the centre of the rectangle frame
Open Element 44 and paste as a new layer - Resize by 60 - Sharpen and place on the top of the filmstrip frame - Duplicate - Image - Flip and Merge Down
Open Element 63 and paste as a new layer - Resize by 30 - Sharpen and place on the top left of the filmstrip frame - Duplicate - Image - Mirror and position on the top right of the 3rd frame - Merge down
Open Element 70 and paste as a new layer - Resize by 40 - Sharpen and position on the bottom right of the tag
Open Element 47 and paste as a new layer - Resize by 30 - Sharpen and place on top of the previous layer
Open Wordart and paste as a new layer - Resize by 40 - Sharpen and place on the top right
Open your tube and paste as a new layer - Place on the left of the tag

Open Paper 16 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group and position toward the top
Open Paper 10 and paste as a new layer - Place above the previous mask and apply the same mask - Merge group and move slightly down
Add drop shadows to your layers - merge visible
Add correct copyright and licence information - Merge down
Save as a png - Add your name - Save again - Done



Thursday 28 November 2013

Santa's Helper - PTU

I am using the art of Derzi which you can find HERE
I am using the PTU Scrapkit Derzi Cane by TinyTurtleDesigns which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 128, 128, 85, 131

Open a new image 600x600
Open Element 41 and paste as a new layer - Resize by 80 - Sharpen - Image - Mirror and position on the top right of the tag
Open Element 42 - Resize as before and position on the top left
Open Element 94 and paste as a new layer - resize by 60 - Sharpen and position in the top middle
Open Element 128 - Image - Mirror - Resize by 50 - Sharpen and position to the top left of the previous layer
Open Element 33 and paste as a new layer - Resize by 30 - Sharpen and place on the right of the previous layer
Open Element 2 and paste as a new layer - resize by 80 - Sharpen - Position in the centre
Open Element 130 and paste as a new layer - Image - Mirror - Resize by 50 - Sharpen and place on the top right
Open Element 11 and paste as a new layer - resize by 50 - Sharpen - Place on the top left
Open Element 22 and paste as a new layer - Resize by 40 - Sharpen and position on the bottom left
Open Element 106 and paste as a new layer - Image - Mirror - resize by 60 - Sharpen and position on the bottom right
Open Element 124 and paste as a new layer - resize by 80 - Sharpen and place on the right
Open Element 85 - Resize by 25 - Sharpen and position on the right of the tree
Open Element 71 - Image - Mirror - Resize by 60 - Sharpen and position on the left of the tree
Open Element 21 - resize by 50 - Sharpen and place on the left of the previous layer
Open Element 109 and paste as a new layer - Resize by 35 - Sharpen and place on the bottom left of the clock
Open your tube and paste as a new layer - Position on the bottom left and apply Radiance at the settings above

Open Paper 33 and paste as a new layer - Send to the bottom and apply a mask of choice - merge group
Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Winter Snow - PTU

I am using the art of Alex Prihodko which you can find HERE
I am using the PTU Scrapkit Frostine by PO Concept which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 128, 50, 128, 131
Eye Candy - Gradient Glow - Fat - White and Light Blue

Open a new image 600x600
Open Element 7 and paste as a new layer - Position in the centre
Open Element 11 and paste as a new layer - resize by 80 - Sharpen and position on the left - Duplicate - Image - Mirror and Resize by 80 - Merge down
Open Element 15 - Paste as a new layer - resize by 85 - Sharpen - Position towards the bottom - Grab your magic wand - Selection the far right top frame - Modify - Expand by 5 - Open a close up of your tube - Position - Selections - Invert - Delete - Select none and move under the frame
Open Element 98 and paste as a new layer - Resize by 80 - Sharpen and position on the left
Open Element 80 and paste as a new layer - Position on the top of the far left frame
Open Element 22 -Image - Mirror - Resize by 40 - Sharpen and position on the left of the previous layer
Open Element 35 and paste as a new layer - Position in the centre - Apply Gradient Glow at the settings above
Open Element 57 and paste as a new layer - Resize by 70 - Sharpen and place in the centre
Open Element 88 and paste as a new layer - Position over the previous layer
Open Element 61 - Resize by 70 - Sharpen and position on the bottom right
Open Element 49 - Resize by 80 - Sharpen and position on the bottom left
Open Element 40 and paste as a new layer - Place on the bottom centre
Open Element 5 and paste as a new layer - Resize by 40 - Sharpen - Place on the left of the previous layer - Duplicate twice more and position next to each other - Merge down
Open your tube and paste as a  new layer - Position on the bottom left
Open Element 87 and paste as a new layer - Resize by 40 - Sharpen and position on top of the postbox on the far left

Open Paper 5 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge group
Add drop shadows to your layers - merge visible
Add correct copyright and licence information - Merge down
Save as a png - Add your name - Save again - Done

Tuesday 26 November 2013

Festive Purple - PTU

I am using the art of Anna Liwanag which you can find HERE
I am using the PTU Scrapkit Winter Solace by PinkParadox Productions which you can find HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 57 and paste as a new layer - resize by 90 and Place on the bottom
Open Element 72 and paste as a new layer - Resize by 50 - Sharpen and position toward the top
Open Element 42 and paste as a new layer - Resize by 65 - Sharpen and position below the window layer
Open Element 94 and paste as a new layer - Resize by 40 -Sharpen and position on the left of the fireplace
Open Element 70 - Resize by 70 and place on the bottom of the fireplace - Duplicate and position below the original - Merge Down
Open Element 90 - Image - Mirror - Resize by 50 -Sharpen and place on the top left
Open Element 111 and paste as a new layer - resize by 50 - Sharpen and position in the centre
Open Element 69 and paste as a new layer - Resize by 15 - Sharpen and place in the top middle of the window
Open Element 3 and paste as a new layer - Resize by 35 - Sharpen and place on the bottom middle of the fireplace
Open Element 41 and paste as a new layer - Resize by 30 - Sharpen and position on the top right of the fireplace
Open Element 43 and paste as a new layer - Resize by 55 - Sharpen and place on the far right
Open Element 40 - Resize by 20 - Sharpen and place in the middle of the fireplace at the top
Open Element 109 and paste as a new layer - Resize by 60 - Sharpen and place on the right
Open Element 22 and paste as a new layer - Resize by 35 - Sharpen and position on the left of the cat
Open Element 38 - Resize as before - Sharpen and position on the left of the previous layer
Open your tube as a new layer - Position on the right - Resizing if necessary

Open Paper 21 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge group
Add drop shadows to your layers - Merge visible 
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Monday 25 November 2013

Moonlight Memories - PTU

I am using the art of Enamorte which you can find HERE
I am using the PTU Scrapkit Moonlight Serenade by Devilish Dezines which you can find HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 22 - Paste as a new layer - resize by 60 - Sharpen and position on the top centre
Open Element 50 and paste as a new layer - Resize by 50 - Sharpen and position on the left - Duplicate - Image - Mirror and Merge Down
Open Frame 3 and paste as a new layer
Resize by 70 - Sharpen and place in the centre
Click inside with your magic wand - Selections - Modify - Expand by 5
Open Paper 2 and paste as a new layer - Open a close up tube and position the right - Paste again and position on the left - merge down - Selections - Invert - Delete - Select none and move under the frame - Change the blend mode of the tube to Multiply
Open Element 45 and paste as a new layer - Resize by 35 - Sharpen - Position on the top right - Duplicate - Image - Mirror and Merge Down
Open Element 24 and paste as a new layer - Resize by 40 - Sharpen - Positon on the top right of the frame - Duplicate - Image - Mirror and Merge Down
Open Frame 2 and paste as a new layer - resize by 60 - Sharpen - Paste in the centre - Duplicate and Merge down
Open Frame 1 and paste as a new layer - resize by 60 - Sharpen and place over the previous layer
Open Element 30 and paste as a new layer - Resize by 60 - Sharpen - Position on the right - Duplicate - Image - Mirror - merge down
Open Element 18 and paste as a new layer - Resize by 40 -Sharpen - position on the bottom right - Duplicate - Image - Mirror and Merge down
Open Element 26 and paste as a new layer - resize as before and position in front of the previous layer
Open Element 47 and paste as a new layer - Resize  by 40 - Sharpen - Position on the bottom right - Duplicate - Image - Mirror and Merge down
Open your tube and paste as a new layer - Position in the centre

Open Paper 1 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge group
Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done


Red Pout - PTU

I am using the art of Tunchy which you can find HERE
I am using the PTU Scrapkit Pillow Talk by Creative Scraps by Crys made to match the tube and you can find this HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 128, 50, 152, 112

Open a new image 600x600
Open Element 8 and paste as a new layer - Resize by 90 - Sharpen
Posiiton toward the top - Duplicate and merge down
Open Element 22 and paste as a  new layer
Resize by 90 - Sharpen and position in the centre
Open Frame 3 - Image - Rotate - 90 Left
Position over the clock layer and resize by 80 - Sharpen
Open Element 21 - Rotate 90 Left as before - Resize by 20 - Sharpen and place on the top of the frame layer
Open Element 10 - Resize by 60 - Sharpen and position on the left of the frame
Open Element 11 - Resize by 40 - Sharpen and posiiton on the left of the previous layer
Open Element 8 - Resize by 40 - Sharpen and position on the right of the polish
Open Element 13 - Resize by 75 - Sharpen and position along the top of the frame
Open your tube and paste as a new layer - Resize if needed - Sharpen and apply Radiance at the settings above - Position along the bottom of the tag

Open Paper 2 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge group
Open Paper 1 and paste as a new layer - Send to the bottom  - Apply the same mask as choice and resize the previous mask layer by 90 - Merge Group
Add drop shadows to your layers - merge visible
Add correct copyright and licence information - Merge down
Save as a png - Add your name - Save again - Done

Sunday 24 November 2013

Shiny Green - PTU

I am using the art of Keith Garvey which you can find HERE
I am using the PTU Scrapkit Shiny 2 by Hania's Design which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Porcelain - Default

Open a new image 600x600
Open Element 56 and paste as a new layer - re size by 80 - Sharpen - Place in the centre
Open Element 92 and paste as a new layer - Place in the middle
Open Element 98 and paste as a new layer - Re size by 70 - Sharpen and place on the right
Duplicate - Image - Mirror and Merge Down
Open Element 34 and paste as a new layer
Re size by 70 - Sharpen and place on the right - Duplicate - Image - Mirror and Merge Down
Open Element 50 - Re size by 80 - Sharpen - Place on the far right - Duplicate - Image - Mirror and merge down
Open Element 45 - Re size by 60 - Sharpen - Position on the bottom - Duplicate and position at the top of the frame
Open Element 72 - Paste as a new layer - Position  on the top right - Duplicate - Image - Mirror - Merge Down - Duplicate - Image - Flip - Merge Down
Open Element 100 - Re size by 60 - Sharpen - Place in the centre
Open Element 8 and paste as a new layer - re size by 50 - Sharpen - Place at the top - Duplicate - Image - Mirror and merge down
Open Element 9 - Re size  by 25 and Sharpen - Position between the previous layer toward the top - Duplicate and position on the bottom of the sparkle bit - Merge Down
See my tag for positioning in case you didn't understand what i meant lol
Open Element 22 and paste as a new layer - Re size as before and position between the 2 green roses - Merge these 3 together - Duplicate - Image - Mirror and Merge down
Open your tube and paste as a new layer - Position in the centre and apply Porcelain
Open Element 37 and paste as a new layer - Re size by 85 - Sharpen - Place on the bottom of the tube
Open Element 3 and paste as a new layer - Re size by 50 - Sharpen and place on the bottom left
Open Element 1 - Image - Mirror - Re size by 60 - Sharpen and place on the right of the nail polish
Open Element 59 and paste as a new layer - Re size by 50 - Sharpen and place on the bottom right

Open Paper 9 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group
Add drop shadows to your layers - merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done


Eternal Darkness - PTU


I am using the art of Gaetano DiFalco which you can find HERE
I am using the PTU IB Gaetano DiFalco 19-3 by Honored Scraps which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 191, 100, 209, 152
Eye Candy - Gradient Glow - Fat - White and Dark Brown

Open a new image 600x600
Open Element 18 and paste as a new layer - Resize by 90 - Sharpen and place in the centre
Open Frame 1 and paste as a new layer - Position in the centre
Click inside with your magic wand
Selections - Modify - Expand by 5
Open paper 3 and paste as a new layer
Selections - Invert - Delete - Select none and move under the frame
Open Frame 2 and paste as a new layer
Position in the centre - Do as you did before with the magic wand
This time copy and paste Paper 6 - Selections - Invert - Delete and move under the frame
Open Element 16 - Image - Mirror - resize by 60 and position on the right
Open Element 17 - Image - Mirror - Resize by 70 - Sharpen and place over the previous layer
Open Element 14 and paste as a new layer - resize by 90 - Sharpen and place on the left
Open Element 2 and paste as a new layer - Resize by 30 - Sharpen - Image - Mirror - Place on the far right
Open Element 4 - Resize by 90 - Sharpen - Place on the left slightly above the bottom
Open your tube and paste as a new layer - Position in the centre - Apply Radiance at the settings above
Open Element 10 - Resize by 50 - Sharpen - place on the bottom of the tube
Open Element 9 - Image - Mirror - resize by 75 - Sharpen and place on the bottom left
Open Wordart 1 and paste as a new layer - Resize by 70 - Sharpen and place on the bottom right - Apply Gradient Glow at the settings above

Open Paper 4 and paste as a new layer - Send to the bottom and apply a mask of choice -  Merge group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Saturday 23 November 2013

Santa Baby - PTU

I am using the art of Alehandra Vanhek which you can find HERE
This is an exclusive tube that i was gifted by ChaChaz - thank you!!
I am using the PTU Scrapkit Cozy Christmas by Pink Paradox Productions which you can find HERE
Font of choice

Filters used:
Xero - Radiance - 128, 134, 43, 173

Open a new image 600x600
Open Element 90 and paste as a new layer - Resize by 80 - Sharpen
Position in the centre
Open Frames 1 and paste as a new layer - Resize by 80 - Sharpen
Place in the centre
Open Frame 3 and paste as a new layer - resize by 60 - Sharpen and position in the centre
Open Element 52 and paste as a new layer - resize by 40 - Sharpen and position on the bottom right of the frames
Open Element 18 and paste as a new layer - Resize by 60 - Sharpen - Position on the top
Open Element 114 and paste as a new layer - resize by 65 - Sharpen and place on the left
Open Element 116 and paste as a new layer - resize by 60 - Sharpen and position on the left of the gold tree
Open Frame 10 - resize by 75 - Sharpen and position over the previous layers
Open Element 77 - Paste as a new layer and resize by 60 - Sharpen and place on the top of the green frame
Open Element 64 - Paste as a new layer - resize by 40 - Sharpen and place on the top right of the green frame
Open Element 86 - Paste as a new layer - resize by 50 - Sharpen and place on the top left
Open Element 75 - Paste as a new layer - resize by 50 - Sharpen - Place on the middle right of the frame - Duplicate - Image - Mirror and position just below centre of the left side of the frame - Merge these layers together
Click on the green frame - Open Element 14 - Image - Mirror - resize by 35 - Sharpen and postion on the bottom left
Open Element 33 - Paste as a new layer - resize by 30 - Sharpen and position on the left
Open Element 27 - Paste as a new layer - resize by 40 - Sharpen and position on the bottom right - erase the stick that sticks out of the green frame with your eraser
Open your tube and paste as a new layer - resize - Sharpen and apply Radiance
Open Element 113 and paste as a new layer - resize by 70 and position along the bottom of the tag
Open Element 105 and paste as a new layer - resize by 40 - Sharpen and place on the far bottom right of the frame - Duplicate - Image - Mirror and Merge Down
Open Element 125 and paste as a new layer - Resize by 60 - Sharpen and place on the bottom left of the tag

Add drop shadows to your layers - merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Friday 22 November 2013

Gothika Love - FTU

I am using the art of Chris Pastel which you can find HERE
I am using the FTU Scrapkit The SO's Love Sampler by Gothic Inspirations which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 128, 50, 128, 146
Eye Candy - Gradient Glow - Thin - Black 
Xero - Fritillary - 5, 30, 31, 39

Open a new image 600x600
Open Shadowed box and paste as a new layer
Resize by 80 - Sharpen and position in the centre
Apply Fritillary at the settings above
Selections - Select all - Float - Defloat - Open your tube and position on the bottom left
Selections - Invert - Delete - Select none - Change the blend mode to Luminance
Open Splatter - Resize by 80 - Sharpen - Position on the top left
Open Tules and paste as a new layer - Resize by 65 - Sharpen - Position on the bottom right
Open Beads and paste as a new layer - Resize by 50 - Sharpen and position on the top
Open Bow and paste as a new layer - Resize by 65 - Sharpen - Position on the top left
Open Rose 2 - resize by 40 - Sharpen and position on the right of the rose
Open Frame 4 and resize by 60 - Sharpen and place in the centre
Open Tree and paste as a new layer - Resize by 60 - Sharpen - Paste on the left of the frame
Duplicate - Image - Mirror and merge down
Open Ribbon 4 and paste on the bottom of the tag
Open Corner Doodle and paste as a new layer - Position on the right
Open Taped Heart and paste as a new layer - Resize by 60 - Sharpen and position on the bottom left
Open Wordart and paste as a new layer - Resize by 60 - Sharpen - Position on the top left
Apply Gradient Glow at the settings above
Open Charm - Resize by 40 - Sharpen - Position on the right - Apply Gradient Glow
Open your tube and paste as a new layer - Position on the right
Open the Skull - Resize by 40 - Sharpen - Image - Mirror - Position on the bottom left

Open Paper 3 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge group
Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done


Thursday 21 November 2013

Giving Thanks - PTU


I am using the art of Ninaste which you can find HERE
I am using the PTU Scrapkit Mi Casa Su Casa by PO Concept which you can find HERE
Mask of Choice
Font of choice

Filters Used:
Eye Candy - Gradient Glow - Fat - White and Black
Xero - Fritillary - 5, 30, 10, 18

Open a new image 600x600
Open Element 9 and paste as a new layer
Resize by 90 - Sharpen - Place on the right - Duplicate - Image - Mirror - merge Down
Open Element 3 and paste as a new layer - Position in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 3 and paste as a new layer
Selections - Invert - Delete - Select none and move under the frame
Apply Fritillary at the settings above
Open Element 54 and paste as a new layer - Position on the top of the frame
Open Element 66 - Image - Mirror and place in the centre
Open Element 31 - Paste as a new layer on the bottom right
Duplicate - Image - Mirror and Merge down
Open Element 34 - Image - Resize by 30 - Sharpen - Place on the bottom left
Open Element 14 - Resize by 80 - Sharpen - Place on the bottom right
Open Element 72 - Resize by 70 - Sharpen - Position on the left on top of the snail
Open your tube and paste as a new layer - Position on the right resizing if necessary
Open Element 19 - Resize by 80 - Image - Mirror - Place on the bottom of the tube
Open Element 30 - Image - Resize by 50 - Sharpen - Place on the bottom right
Open Element 50 and paste as a new layer - Resize by 60 - Sharpen - Place on the top left and apply Gradient Glow at the settings above
Open Element 10 - Resize by 50 -Sharpen - Place behind the snail and move to the right of it

Open Paper 11 and paste as a new layer - send to the bottom and apply a mask of choice - merge group
Add drop shadows to your layers - merge visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Fairy Cute - PTU

I am using the art of Spazz which you can find HERE
I am using the PTU Scrapkit Natalie made to match the tube by Abstract Creations which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 128, 94, 79, 131

Open a new image 600x600
Open Element 62 and paste as a new layer
Position in the centre
Open Element 31 - Resize by 75 - Sharpen - Place at the top
Duplicate - Image - Mirror and move to the bottom - merge down
Open f2 and paste as a new layer - resize by 80 - Sharpen
Place in the centre - Click inside with your magic wand
Selections - Modify - Expand by 5
Open paper 9 and paste as a new layer - Position - Open element 23 and resize by 50 - Position on the bottom of the frame
Open your tube and paste - position - Duplicate and hide for now
Selections - invert - delete - select none and move all under the frame
unhide the duplicated tube and erase the overhanging parts
Open Element 9 - Resize by 60 - Sharpen and position on the left
Open Element 41 - image - mirror - resize by 80 - sharpen - position on the left
Duplicate - image - mirror and merge down
Open Element 2 - Resize by 80 - sharpen - position on the bottom right
Duplicate - image - mirror - flip - merge down
Open Element 29 - Resize by 80 - sharpen - place on the bottom
Apply Radiance to both of your tube layers at the settings above

Open Paper 10 and paste as a new layer - send to the bottom and apply a mask of choice - merge group
Add drop shadows to your layers - merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done


Wednesday 20 November 2013

Gothy Xmas - PTU

I am using the art of Ninaste which you can find HERE
I am using the PTU Scrapkit Red and Black Daisy Fairy kit by TTD which you can find HERE
Mask of choice
Font of Choice

Open a new image 600x600
Open Element 68 and paste as a new layer - resize by 90 - Sharpen
Position on the bottom of the tag
Open Element 58 and paste as a new layer
Resize by 70 - Sharpen and position on the top left
Duplicate - Image - Mirror and Merge down
Open Element 62 and paste as a new layer
Resize by 70 - Sharpen - Image - Rotate - 45 Right - Place in the centre
Open Element 111 and paste as a new layer
Resize by 50 - Sharpen and position on the bottom  left of the frame
Open Element 61 and paste as a new layer
Resize by 90 - Position on the bottom of the tag
Open Element 119 - Resize by 40 - Sharpen - Position on the top right
Open Element 117 and paste as a new layer - resize by 30 - Sharpen and position on the top right of the tag
Open Element 112 and paste as a new layer - Resize by 25 - Sharpen and position on the left of the tag
Open Element 20 and paste as a  new layer - resize by 35 - Sharpen and position on the bottom left
Open Element 18 and paste as a new layer - Resize by 75 - Sharpen and position on the right
Open Element 63 and paste as a new layer - Image - Mirror - resize by 40 - Sharpen - Place on the bottom centre of the tag
Open Element 50 - Resize by 40 - Sharpen and position on the right of the sign
Open Element 95 - Image - Mirror - Resize by 55 - Sharpen - Place on the bottom left
Open Element 80 - Resize by 40 - Sharpen - Place on the bottom right
Open your tube and paste as a new layer - Position to the left centre

Open Paper 12 and paste as a new layer - Send to the bottom and apply a mask of choice - merge group
Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Xmas is Here - PTU

I am using the art of Verymany which you can find HERE
I am using the PTU Scrapkit Xmas Can Come by DRAN Design which you can find HERE
Font of Choice

Filters Used:
Xero - Porcelain - Default

Open a new image 600x600
Open Element 44 and paste as a new layer - Image - Flip
Resize by 70 - Sharpen and position along the bottom
Open Element 50 and paste as a new layer 
Position in the centre of the tag
Open Element 21 and paste as a new layer
Resize by 85 - Sharpen and position at the top
Open Element 6 and paste on the right of the canvas
Open Element 36 and paste as a new layer - Resize by 60 - Sharpen
Position on the bottom right of the tag
Open Element 8 - Image - Mirror - Resize by 40 - Sharpen and position on the top left
Open Element 28 - Resize by 80 - Sharpen - Position on the far left
Open Element 35 and paste as a new layer - Resize by 40 - Sharpen and position on the left in front of the house
Open Element 19 - Image - Mirror - resize by 30 - Sharpen and position on the right of the snowman
Open your tube and paste - Position in the centre and apply porcelain at the settings above

Add drop shadows to your layers - merge visible
Add correct copyright and licence information - merge down
Save as a png - add your name - Save again - Done


Tuesday 19 November 2013

Vamp - PTU

I am using the poser art of Norella which you can find HERE 
I am using the PTU Scrapkit Carpe Noctem made to match the tube by Waggish Sparkles which you can find HERE 
Mask of Choice
Font of Choice

Open a new image 600x600
Open Locked Frames and paste as a new layer
Resize by 50 - Sharpen and position in the centre
Click inside with your magic wand - both frames - selections - modify - expand by 5
Open Paper 8 and paste as a new layer
Open your tube and paste as a new layer - Position in the right frame - Duplicate - Image - mirror and merge down
Selections - Invert - Delete - Select none and move underneath the frame
Change the blend mode of the tubes to soft light
Open graveyard and paste as a new layer - Resize by 80 - sharpen and place at the bottom
Open Path - resize  by 60 -Sharpen - Place in the centre
Open bats - resize by 60 - sharpen - position on the top right
Duplicate - image - mirror - merge down
Open tree 2 and paste as a new layer - resize by 90 - sharpen - place on the left - duplicate - image - mirror and merge down
Open your tube and paste as a new layer - position in the centre
Open Sparkle and paste as a new layer - Resize by 60 - Sharpen - place on the right - duplicate - image - mirror and merge down
Open mask - resize by 60 - send to the bottom
selections - select all - float - defloat - open paper 3 and paste as a new layer
selections - invert - delete - select none and change the blend mode to multiply

Add drop shadows to your layers - merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Gypsy Girl - PTU

I am using the poser art of Tammy's Welt which you can find HERE 
I am using the PTU Scrapkit Gypsy also by Tammy which you can find HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 45 and paste as a new layer
Image - Mirror - resize by 80 - Sharpen and place on the left
Open Element 34 and paste as a new layer
Resize by 70 - Sharpen and position on the bottom of the tree
Open Element 2 and paste as a new layer - Position on the right
Open Element 15 - Resize by 40 - Sharpen - Position on the right of the tag
Open Element 48 - Position in front of the barrels - Duplicate - Image - Mirror and Merge down
Open Element 52 and paste as a new layer - Resize by 40 - Sharpen and place in front of the caravan
Open Element 28 and paste as a new layer - Resize by 40 - Sharpen and place on the bottom left
Open your tube and paste as a new layer - Position in the centre

Open Paper 2 and paste as a new layer - Send to the bottom and apply a mask of choice - merge down - Open Paper 3 and paste as a new layer - Apply the same mask of choice and resize by 80 - Sharpen
Add drop shadows to your layers - merge visible
Add correct copyright and licence information - merge down
save as a png - add your name - save again - done

Monday 18 November 2013

Wild West - PTU


I am using the art of Wendy Gerber which you can find HERE
I am using the PTU Scrapkit Star Fall Beauty by PO Concept which you can find HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 14 and paste as a new layer
Position on the left - Duplicate - Image - Mirror and merge down
Open Element 12 - Resize by 90 - Sharpen and place in the centre
Open Element 88 - Resize by 70 - Sharpen and position to the left centre
Open Element 10 - Resize by 70 - Sharpen - Place on the far left - Duplicate - Image - Mirror and Merge down
Open Element 84 and paste as a new layer - Resize by 80 - Sharpen - Place in the centre
Open Element 29 and paste as a new layer - Resize by 40 - Sharpen - Position on the bottom right
Open Element 63 and paste as a new layer - Position in front of the horse
Open Element 27 - Image - Mirror - Resize by 40 - Sharpen and place on the bottom right
Open Element 100 and paste as a new layer - Place in the centre
Open Element 16 and paste as a new layer in the centre
Open Element 89 and paste - Position on the top left
Open Element 58 - Resize by 80 - Sharpen - Place on the top left of the frame
Open Element 28 - Image - Mirror - Resize by 60 and place on the left
Open Element 2 - Resize by 50 - Sharpen and place on the bottom left
Open your tube and paste as a new layer - Position in the centre
Open Element 34 - Resize by 80 - Sharpen and place on the bottom
Open Element 98 and paste as a new layer - Resize by 40 -Sharpen and place on the bottom left

Open Paper 12 and paste as a new layer - Send to the bottom and apply a mask of choice - merge group
Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Olivia's Tombstone - PTU

I am using the art of Lilith Morana which you can find HERE 
I am using the PTU Scrapkit Gothic Passion by Dnscraps which you can find HERE 
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 128, 50, 128, 179

Open a new image 600x600
Open Moon 2 and paste as a new layer - Resize by 60 - Sharpen and place on the top right corner of the tag
Open Diamond Frame and paste as a new layer - Resize by 50 - Sharpen - Position on the top left of the canvas - Duplicate and position on the bottom right - merge Down
Click inside both of the frames with your magic wand - selections - modify - expand by 5 - open Paper 8 and paste as a new layer - Selections - Invert - delete - Select none - move under the frame
Click on the top right frame - Open bow dot 2 and paste as a new layer - Resize by 40 - Sharpen - Place on the frame
Open Curtain and paste as a new layer - resize by 70 - Sharpen - Place on the top left - Duplicate - Image - Mirror and position on the right frame
Open Candles and paste as a new layer - resize by 70 - Sharpen and place along the bottom
Open Tomb - Resize by 80 - Sharpen and place in the centre
Open Eye - Resize by 40 - Sharpen - Position on the top right frame 
Open Thorne Heart 2 and paste as a new layer - Resize by 35 - Sharpen and position on the top centre of the tomb
Open your tube and position in front of the tomb as though she is standing on the bottom
Apply Radiance at the settings above
Open Blood Roses and paste as a new layer - Resize by 70 and position along the bottom
Open Poison - Resize by 25 - Sharpen and position on the bottom right next to the tube
Open Candles 2 and paste as a new layer - Image - Mirror - Resize by 40 - Sharpen and place on the bottom left
Open Heart Pin and paste as a new layer - Resize by 30 - Sharpen and position on the top left on the curtain layer
Open Goblet - Resize by 20 - Sharpen and position on the bottom right next to the poison
Open Bottle Heart - Image - Mirror - Resize by 30 - Sharpen and place on the bottom left
Open Bat - Resize by 30 - Sharpen and position on the left of the tube

Open Paper 6 and paste as a new layer - Apply radiance at the settings above - send to the bottom and apply a mask of choice - merge group
Add drop shadows to your layers - merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Sunday 17 November 2013

Let it Snow - FTU

.I am using the art of Felice which you can find HERE
I am using the FTU Scrapkit Let it Snow by Vaybs which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Eye Candy - Gradient Glow - Fat - White and Blue
Xero - Radiance - 185, 140, 103, 39

Open a new image 600x600
Open Element 22 and paste as a new layer - Position at the top
Duplicate - Image - Mirror and move down - merge down
Open Element 23 and paste as a new layer - Resize by 80 -Sharpen - Place in the centre
Click inside with your magic wand - Selections - Modify - Expand by 5
Open Paper 5 and paste as a new layer - Selections - Invert - Delete - Select none and move under the frame
Open Element 45 - Resize by 60 - Sharpen - Position on the left of the frame and move underneath
Open Element 12 and paste as a new layer - Resize by 60 -Sharpen - place on the right of the frame
Open Element 55 and paste as a new layer - Resize by 75 - Sharpen and place in the centre
Open Element 19 and paste - Resize by 55 - Sharpen and place on the top right
Open Element 26 and paste as a new layer - resize by 65 - Sharpen and place below the snowman
Open Element 44 and paste as a new layer - resize by 80 - Sharpen and place on the top left
Open Element 58 and paste as  a new layer - Poisiton on the top of the tag
Open Element 32 - Resize by 80 - Sharpen - Place at the top - Duplicate - Image - Mirror and Merge Down
Open Element 24 and paste as a new layer - Resize by 60 -Sharpen and position on the bottom right - Open Element 10 and paste - Resize by 60 - Sharpen - place on the left of the previous layer
Open Element 64 - Resize by 80 - Sharpen - Position above the presents
Open Element 33 and paste as a new layer - Resize by 70 - Sharpen and place on the right
Open Element 25 - Resize by 80 - Sharpen - place on the bottom right and apply gradient glow at the settings above
Open your tube and paste as a new layer - Position in the centre - Apply Radiance at the settings above

Open Paper 9 and paste as a new layer - send to the bottom and apply a mask of choice - Merge group
Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done