Dark Shadows - FTU

I am using the art of Rezwana Khan which you can find HERE

I am using the FTU Scrapkit Dark Shadows by Inzpired Creationz which you can find HERE

Mask of Choice

Font of Choice

Open a new image 600x600

Open Frame 1 and paste as a new layer

Resize by 70 - Sharpen and position in the centre

Click inside with your magic wand

Selections - Modify - Expand by 5

Open Paper 13 and paste as a new layer

Resize by 50 - Sharpen - Open your tube and paste as a new layer

Duplicate and hide for now

Selections - Invert - Delete - Select None on the tube and paper layer

Move under the frame

Open Frame 2 - Image - Mirror - Resize by 65 - Sharpen and position over the first frame

Unhide your duplicated tube and erase the bottom part with your eraser tool

Click on the square frame layer - Open Tree 3 and paste as a new layer

Position on the left and erase the bottom of the tree trunk

Click on the circle frame - Open Bow - Image - Mirror - Resize by 60 - Sharpen

Position on the top right of the frame

Open Moon 2 and paste as a new layer - Resize by 60 - Sharpen - Image - Mirror

Position on the top left and send to the bottom

Open Scattered Petals and paste as a new layer

Resize by 60 - Sharpen and send to the bottom

Open Sparkles 2 and paste as a new layer

Resize by 70 - Sharpen - Image - Flip - Position at the bottom

Duplicate and position above the original - Merge Down

Duplicate - Image - Flip - Image - Mirror - Place at the top and move under the tube

Open Hearts 1 and paste as a new layer - Resize by 50 - Sharpen and send to the bottom

Open Paper 18 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group

Add drop shadows to your layers - Merge Visible

Add correct copyright and licence information - Merge Down

Save as a png - Add your name - Save again - Done

Welcome to my World - PTU

I am using the art of Anna Liwanag which you can find HERE

I am using the PTU Scrapkit FairyWorld by ChiChi Designz which you can find HERE

Mask of Choice

Font of Choice

Filters Used:

Eye Candy - Gradient Glow - Fat - White and Pink

Open a new image 600x600

Open Frame 1 and paste as a new layer - Resize by 80 - Sharpen and position in the centre

Click inside with your magic wand

Selections - Modify - Expand by 5

Open Paper 1 and paste as a new layer

Position - Open a close up of your tube and position to the left of the frame

When happy - Selections - Invert - Delete - Select None and move both under the frame

Change the blend mode od the close up to Darken

Open Cloud - Resize by 80 - Sharpen - Move to the top and move to the bottom

Open Flower Branch and paste as a new layer - Resize by 60 - Sharpen

Image - Rotate - Free Rotate - 90 Left - Position on the right of the frame

Duplicate - Image - Mirror and Merge Down

Open Flower Trail and paste as a new layer - Resize by 60 - Sharpen

Using your deform tool - Angle it so it fits at the top of the frame

Open your main tube and paste as a new layer - Position on the right of the tag

Open Grass and paste as a new layer - Resize by 90 and position at the bottom of your tag

Open Glitter and paste as a new layer - Send to the bottom

Open Wordart and paste as a new layer 

Resize by 70 - Sharpen - Send to the bottom and apply Gradient Glow at the settings above

Open Flowers 2 and paste as a new layer - Resize by 40 - Sharpen and position on the bottom left of the tag - Place under the wordart

Open Butterfly - Resize by 30 - Sharpen - Image - Mirror - Position on top of the flowers

Open Paper 3 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group

Apply drop shadows to your layers - Merge Visible

Add correct copyright and licence information - Merge Down

Save as a png - Add your name - Save again - Done

Perfect Birdsong - PTU

I am using the art of Barbara Jensen which you can find HERE

I am using the PTU Scrapkit Birdsong by Devilish Dezines which you can find HERE

Mask of Choice

Font of Choice

Filters Used:

Xero - Radiance - 128, 152, 52, 112

Open a new image 600x600

Open Frame 2 and paste as a new layer

Resize by 70 - Sharpen and position in the centre

Click inside with your magic wand - Selections - Modify - Expand by 5

Open Paper 6 and paste as a new layer 

Selections - Invert - Delete - Select None and move under the frame

Effects - Texture Effects - Blinds - Width 4 - Opacity 31 - Colour Brown - Both Boxes Checked

Open Element 39 and paste as a new layer

Resize by 80 - Sharpen - Image - Flip - Position on the top left

Duplicate - Image - Mirror - Flip - Position on the bottom right

Merge Down and move to the bottom

Open Element 11 and paste as a new layer

Resize by 55 - Sharpen - Position at the top

Duplicate - Image - Flip - Merge Down - Send to the bottom

Open Element 4 and paste as a new layer - Resize by 60 - Sharpen - Send to the bottom

Open Frame 4 and paste as a new layer - Resize by 70 - Sharpen - Place in the centre

Open the tube you are using and resize if necessary

Position in the centre of the tag

Open Element 44 - Paste as a new layer - Resize by 60 - Sharpen

Position to the left of the tag - Duplicate and position under the tube

On the original layer - Erase any that appears over your tube

Do the same with the duplicated layer 

I colorised both of my layers to match the tube

Erase the bottom of the tube thats straight edged along the bottom

See my tag for ideas and placement

Open Element 37 - Image - Mirror and paste as a new layer - Resize by 60 - Sharpen

Position on the right of the tube and move below

Duplicate - Image - Flip - Using your deform tool angle it so it fits together and merge down

Open Element 33 and paste as a new layer - Image - Mirror - Resize by 50 - Sharpen

Position on the bottom of the tag - Apply Radiance to your tube at the settings above

Open Paper 2 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Down

Add drop shadows to your layers - Merge Visible

Add correct copyright and licence information - Merge Down

Save as a png - Add your name - Save again - Done

Mermaid Beach - PTU

I am using the art of Alex Prihodko which you can find HERE 

I am using the PTU Scrapkit Ocean Blues by Kizzed by Kelz which you can find HERE 

Mask of Choice

Font of Choice

Filters Used:

Xero - Radiance - 128, 50, 70, 124

Open a new image 600x600

Open Frame 4 and paste as a new layer - Posiiton in the centre of the frame

Click inside with your magic wand

Selections - Modify - Expand by 8

Open Paper 12 and paste as a new layer - Resize by 60 - Sharpen

Selections - Invert - Delete - Select None and move under the frame

Open Wave 2 - Resize by 85 - Sharpen and position on the bottom left of the frame

Open Dolphin and paste as a new layer - Resize by 90 - Sharpen and position to the top right

Open Water Puddle and paste as a new layer

Position at the bottom of the frame

Open Porthole and paste as a new layer

Resize by 50 - Sharpen - Position on the left of the frame

Duplicate and position on the right slightly off centre

See my tag for placement ideas

Using your Elipse Tool - Select Circle - Solid Line - Width 1

Draw a circle that is the same size as the porthole on the right

Duplicate and position over the one on the left

Grab your magic wand - Selections - Modify - Expand by 1

Open your tube and position in the frame - Duplicate and place in the other frame

When happy - Selections - Invert - Delete - Select None and move both under the circle layers

Delete the Elipse circles and move the tubes under the porthole layers - Change the blend mode of the tubes to Luminance L

Open Sun Sparkle - Resize by 70 - Sharpen - Image - Mirror - Position on the top left of the frame

Open Bubbles 3 and paste as a new layer - Image - Mirror - Position on the right of the tag

Open Sparkle and paste as a new layer

Position under the porthole layers

Open Box - Image - Mirror - Resize by 50 - Sharpen - Position on the bottom left

Open Egret 2 and paste as a new layer - Resize by 50 - Sharpen - Position on the right

Open your tube as a new layer - Position in the centre - Resizing if necessary - Apply Radiance at the settings above

Open Beach Sign and paste as a new layer - Resize by 30 - Sharpen More - Position on the top right of the tag

Open Paper 11 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group

Add drop shadows to your layers - Merge Visible

Add correct copyright and licence information - Merge Down

Save as a png - Add your name - Save again - Done

My World - PTU

I am using the art of Kurama Phoenix - This is the Bonus Tube June 2013

If you hurry, you can pick this up in the Bonus Tube Bonanza thats going on right now!!

If not you can use another tube by her which you can find HERE

I am using the PTU IB Kurama Phoenix June 2013 by Schnegge Scraps which you can find HERE

Mask of Choice

Font of Choice

Filters Used:

Eye Candy - Gradient Glow - White and Purple

Xero - Fritillary - 5, 30, 10, 16

Xero - Radiance - 167, 70, 97, 79

Open a new image 600x60

Open Frame 1 and paste as a new layer

Image - Mirror - Image - Rotate - Free Rotate - 90 - Left

Position to the top right of the tag

Click inside with your magic wand

Selections - Modify - Expand by 5

Open Paper 6 and paste as a new layer

Open a close up of your tube and paste on the right of the frame

Duplicate and position on the left 

When happy - Selections - Invert - Delete - Select None and move all under the frame layer

Click on the paper layer - Effects - Texture Effects - Weave - Gap Size 1 - Width 5 - Opacity 1

Both Colours White and Fill Gaps Checked - Press OK

On the right close up tube - Change the blend mode to Dodge - Duplicate

On the Left close up - Change the blend mode to Luminance L

Open Element 7 and paste as a new layer

Resize by 70 - Sharpen and position on the top left corner of the frame

Open Element 10 and paste as a new layer

Resize by 50 - Sharpen and position on the top right over the previous layer

Open Wordart and resize by 70 - Sharpen - Paste as a new layer

Position on the top of the frame - Apply Gradient Glow at the settings above

Apply Fritillary at the settings above to the wordart aswell

Open Element 9 and paste as a new layer

Resize by 30 - Sharpen and position on the bottom right of the frame

Open your tube and paste as a new layer

Position at the bottom of the tag

Open Element 18 and paste - Resize by 25 - Sharpen and position on the bottom right of the shoe on the tube

Open Element 16 and paste as a new layer - Resize by 30 - Sharpen and position next to the cat on the left

Open Element 12 and paste as a new layer - Send to the bottom and position

Apply Radiance to your tube at the settings above

Open Paper 4 and paste as a new layer - Resize by 80 - Sharpen - Send to the bottom and apply a mask of choice - Merge Group

Add drop shaows to your layers - Merge Visible

Add correct copyright and licence information - Merge Down

Save as a png - Add your name - Save again - Done

Musical Dreamworld - PTU

 

I am using the art of Enamorte which you can find HERE
I am using the PTU Enamorte Bundle Pack 17 by Abstract Creations which you can find HERE
Mask of Choice
Font of Choice

This is tut number 3 using the package

Filters Used:
Eye Candy - Gradient Glow - Fat - White and Purple

Open a new image 600x600
Open f1 and paste as a new layer - Resize by 60 - Sharpen
Position in the centre
Click inside with your magic wand - Selections - Modify - Expand by 6
Open Paper 4 and paste as a new layer
Open e32 and paste as a new layer - Resize by 80 and position in the frame
Selections - Invert - Delete - Select None and move under the frame
Apply Gradient Glow to the notes layer at the settings above
Open e11 and paste - Position at the top of the frame
Open e25 and paste as a new layer - Position at the bottom of the tag
Open e3 and paste as a new layer - Resize by 30 - Sharpen and position on the leg of the bench on the right
Duplicate - Image - Mirror and Merge Down when happy
Open Element 29 - Resize by 40 - Sharpen and position on the top left of the frame
Open your tube and paste as a new layer
Position her so she is sitting on the bench
Open wa3 and paste as a new layer - Resize by 80 - Sharpen
Position over the tube - See my tag for placement ideas
Apply Gradient Glow - This time - Thin Purple - Repeat and then White - Sharpen More
Open e23 and paste as a new layer - Resize by 50 - Sharpen and position on the left of the tube

Open Paper 7 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Just Looking - PTU

 

I am using the art of Enamorte which you can find HERE
I am using the PTU Enamorte Bundle Pack 17 by Abstract Creations which you can find HERE
Mask of Choice
Font of Choice

This is tut number 2 using the package

Filters Used:
Xero - Radiance - 148, 185, 76, 161
Xero - Fritillary - 6, 67, 14, 21

Open a new image 600x600
Open Element 31 and paste as a new layer - Position at the top
Duplicate - Image - Flip and Merge Down
Open Element 26 and paste as a new layer - Image - Mirror and position at the bottom of the tag
Open f2 and paste as a new layer
Image - Resize by 80 - Sharpen and position in the centre
Click inside with your magic wand
Selections - Modify - Expand by 5
Open Paper 6 and paste as a new layer - Position and when happy - Selections - Invert - Delete - Select None
Move under the frame and apply Fritillary at the settings above
Open Element 16 and paste as a new layer - Position in the centre of the frame
Open f3 and paste as a new layer - Resize by 60 - Sharpen
Position in the centre of the frame - Click inside with your magic wand
Selections - Modify - Expand by 5 - Open Paper 2 - Resize by 60 - Sharpen
Open your close up tube and paste as a new layer
When happy - Selections - Invert - Delete - Select None on both the tube and paper layer
Move under the frame and change the blend mode of the tube to Exclusion
Open Element 24 and paste as a new layer - Resize by 40 - Sharpen
Position on the top right of the frame - Duplicate - Image - Mirror and Merge Down
Open Element 22 and paste as a new layer - Resize by 30 - Sharpen
Position on the bottom right of the frame - Duplicate and position next to the original - Merge Down
Duplicate - Image - Mirror and Merge Down
Open Element 41 and paste as a new layer - Resize by 60 - Sharpen and position on the left of the path
Open your tube and paste as a new layer - Position on the right of the tag
Position her so she is looking at oneof the jewels on the frame
Apply Radiance to her at the settings above

Open Paper 5 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Happy Fall - FTU

 

 I am using the art of Elizabeth Caffey which you can find HERE

I am using the FTU Scrapkit Fall by Digi Mania which you can find HERE

Mask of Choice

Font of Choice

Filters Used:

Xero - Clarity - Default

Xero - Porcelain - Default

Open a new image 600x600

Open your tube and paste as a new layer

Resize by 80 and position in the centre

Open Frame 1 and paste as a new layer

Resize by 90 - Sharpen and send to the bottom

Click inside all the frames with your magic wand

Selections - Modify - Expand by 5

Open Paper 7 and paste as a new layer

Open your tube again and place parts in the frame on the left and right side

When happy - Selections - Invert - Delete - Select None and move all under the frame

Merge the 2 tube layers together and change the blend mode to Luminance L

Click on the frame layer

Open Flowers - Image - Flip - Position on the right frame

Duplicate - Image - Mirror and Merge Down

Open Bow Diamond 1 and paste as a new layer

Resize by 70 - Sharpen - Position on the bottom of the left frame

Duplicate - Image - Mirror and Merge Down

Apply Xero Clarity to your main tube at the settings above

Apply Porcelain to your tube at the settings above

Open Paper 2 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group

Add drop shadows to your layers - Merge Visible

Add correct copyright and licence information - Merge Down

Save as a png - Add your name - Save again - Done

Lounging - PTU

 

 I am using the art of Barbara Jensen which you can find HERE
I am using the PTU Scrapkit Harlot by Gemini Creationz which you can find HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 22 and paste as a new layer
Resize by 80 - Sharpen and position in the centre
Click inside with your magic wand - Selections - Modify - Expand by 7
Open Paper 7 and paste as a new layer
Resize by 70 - Sharpen and position - Open a close up of your tube and position in the frame
Selections - Invert - Delete - Select None on both layers and move under the frame
Change the blend mode of your tube to Screen - Duplicate and Merge Down
Open your full tube and paste as a new layer - Position on the bottom of the frame
Open Element 60 and paste as a new layer
Resize by 60 - Sharpen - Image - Flip and send to the bottom
Open Element 41 - Resize by 40 - Sharpen More - Position underneath the tubes legs
Open Element 37 and paste as a new layer
Send to above the lace layer to the left
Open Element 38 and paste as a new layer - Position over the previous layer to the left
Duplicate - Image - Mirror and Merge Down
Open Element 17 and paste as a new layer
Resize by 40 - Sharpen and place on the top centre of the frame
Duplicate - Resize by 80 - Sharpen and place on the right of the previous layer
Duplicate - Image - Mirror and Merge Down - Move under the original bow
Click on the frame layer - Open Element 7 - Image - Flip
Resize by 80 and position on the bottom
See my tag for a placement idea or place where you think best
Click on the frame and open Element 29 - Resize by 30 - Sharpen More
Position on the top of the frame next to the ribbon on the right
Duplicate - Image - Mirror and Merge Down

Open Paper 9 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Fairy Beautiful - PTU

 

 I am using the art of PinUpToons which you can find HERE
This tube is from August 2011 - which until the end of the month you will be able to purchase in the Bonus Tube Bonanza!!
I am using the PTU IB Scrapkit PUT Bonus August 2011 by Ladyhawwk Designs which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Mura's Meisters - Copies - Encircle - Default
Eye Candy - Gradient Glow - Fat - White and Dark Green
Penta - Dot and Cross - 72, 27, 9

Open a new image 600x600
Open Element 16 and paste as a new layer - Resize by 20 - Sharpen More
Position in the centre and apply Mura's Copies at the settings above
Position in the centre when happy with the settings
Open your tube as a new layer - I resized mine by 95 - Sharpen
Position to the right of the frame
Click inside the flower frame with your magic wand
Selections - Modify - Expand by 10
Open Paper 8 and paste as a new layer
Open your tube and paste as a new layer - Position to the left
Selections - Invert - Delete on both the paper and tube layers - Select None and move under the frame
On the paper layer - Effects - Texture Effects - Weave - Colour a sandy colour from your tube
Apply Penta.com to the paper layer at the settings above
Change the blend mode of the close up to Lighten
Open Wordart and paste as a new layer
Image - Rotate - Free Rotate - 90 Left
Position on the left of the canvas and apply Gradient Glow at the settings above
Open Element 17 and paste as a new layer - Send to the bottom
Click on the top of the frame layer - Open Element 11 and paste as a new layer
Resize by 60 - Sharpen - Duplicate - Image - Flip - Image - Mirror - Merge Down
Click on the right of the frame - Open Element 5
Resize by 50 - Sharpen and position to the top of the wordart
Duplicate - Image - Flip - Merge Down

Open Paper 7 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Little Dark Angel - PTU

 

 I am using the art of Jenga which can be found HERE
I am using the PTU Scrapkit Little Angel which is an exclusive kit made to match the tube by Devilish Dezines which you can find HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 18 and paste as a new layer
Resize by 80 - Sharpen - Place toward the top of the canvas
Duplicate - Image - Flip and Merge Down
Open Element 19 - Resize by 60 - Sharpen and position in the centre of the canvas
Open Element 51 and paste as a new layer - Resize by 60 - Sharpen
Position on the left of the tag
Duplicate - Image - Mirror and Merge Down
Open Element 43 and paste as a new layer - Resize this by 60 - Sharpen
Position on the left - Duplicate - Image - Mirror and Merge When happy
Open Element 68 - Resize by 50 - Sharpen and position in the centre
Open Element 49 and paste as a new layer - Resize by 85 - Sharpen and position at the top
Open Element 51 and paste as a new layer
Resize by 70 - Sharpen - Position on the bottom right
Duplicate - Image - Mirror and Merge Down when happy
Open Element 74 - Resize by 60 - Sharpen
Position on the right of the tag - Duplicate - Image - Mirror and Merge Down
Open the tube you are using and paste as a new layer - Position her in the centre
Open Element 38 and paste as a new layer
Resize by 70 - Sharpen and position at the bottom of the tube
Open Element 64 - Resize by 50 - Sharpen and position on the bottom left of the tag
Duplicate - Image - Mirror - Duplicate this one and resize by 70 - Sharpen and position next to the original
Duplicate - Image - Mirror - Position in the gap thats left - Merge Down all the 4 gravestone layers
Open Element 57 - Paste as a new layer - Resize by 30 - Sharpen More - Position on the far left of the gravestone
Duplicate - Image and Mirror - Merge Down

Open Paper 5 - Resize by 80 - Sharpen - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Big is Beautiful - PTU

 

I am using the art of Elias Chatzoudis which you can find HERE
I am using the PTU Scrapkit BBW Mix n Match Collab made to match the tube by Designs by Sarah
You can find this HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 73, 88, 85, 149
Eye Candy - Gradient Glow - Fat - White and Purple

Open a new image 600x600
Open Frame 1 and paste as a new layer - Resize by 80 - Sharpen and place in the centre
Open Frame 3 and paste as a new layer
Resize by 85 - Sharpen - Image - Rotate - Free Rotate - 90 Right
Position in the centre of the circle frame
Click inside with your magic wand
Selections - Modify - Expand by 5
Open Paper 9 and paste as a new layer
Open a close up of your tube and paste to the left of the frame
Duplicate and position next to the original
Merge down when happy - Selections - Invert - Delete - Select None
Move the tube and paper layers under the frame
Change the blend mode of the tubes to Luminance L
Open Frame 5 and paste as a new layer
Resize by 80 - Sharpen and position in the centre of the previous frame
Click inside all 3 frames with your magic wand
Selections - Modify - Expand by 5
Open Paper 6 and paste as a new layer
Open your tube and position in the right frame
Duplicate and position in the left frame and merge down
Selections - Invert - Delete - Select None and move the tube and paper layers under the frame
Open Flame 1 - Resize by 60 and Sharpen
Position on the left under the frame - Duplicate - Image - Mirror and Merge Down
Open Sequins and paste as a new layer - Position in between the flame layers
Open your tube and paste as a new layer
Position in the centre and apply Radiance at the settings above - Erase parts of her legs so its not a straight edge at the bottom
Open WordArt 3 and paste as a new layer - Resize by 70 - Sharpen and position at the bottom of the tag
Apply Gradient Glow at the settings above

Open Paper 1 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Dazzle Me - PTU

 

 I am using the art of Enamorte which you can find HERE
I am using the PTU Scrapkit Be Dazzled by Rebel Dezigns which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Fritillary - 5, 30, 10, 18
Eye Candy - Gradient Glow - Fat Blue and Purple
Xero - Radiance - 82, 146, 173, 79

Open a new image 600x600
Open Frame 3 and paste as a new layer
Resize by 70 - Sharpen and position in the centre
Open Frame 2 and paste as a new layer
Resize by 80 - Sharpen and position over the previous frame
Click inside this frame with your magic wand
Selections - Modify - Expand by 5
Open Paper 5 and paste as a new layer
Position - Open a close up of your tube and position - Duplicate and hide for now
Selections - Invert - Delete - Select None and move both under the frame
Unhide the duplicated tube and erase the bottom overhanging parts
Apply Fritillary to the paper at the settings above
Click on the paper layer - Open Element 1 and paste as a new layer
Resize by 60 - Sharpen More and position in the centre
Click on the frame layer - Open Element 4 and paste as a new layer
Resize by 60 - Sharpen and position on the top right of the frame
Duplicate - Image - Mirror and Merge Down
Open WA and paste as a new layer - Resize by 80 - Sharpen and position at the bottom
Apply Gradient Glow at the settings above
Click on the frame layer - Open Element 18 - Resize by 80 - Sharpen
Image - Rotate - Free Rotate 90 Left
Position on the left side of the frame - Duplicate - Image - Mirror - Merge Down
Open Element 12 - Resize by 50 - Sharpen - Position on the top left
Duplicate - Image - Mirror - Merge Down - Duplicate - Flip - Merge Down
Send to the bottom - Apply Radiance to the tube layers at the settings above

Open Paper 1 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Sadness - PTU

 

 I am using the art of Enamorte which you can find HERE
I am using the PTU Enamorte Bundle Pack 17 by Abstract Creations which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 128, 50, 128, 155

This is tut 1 of 3 using the pack

Open a new image 600x600
Open f5 and paste as a new layer
Resize by 70 - Sharpen and position in the centre
Open f4 and paste as a new layer
Resize by 80 - Sharpen and position over the previous frame
Click inside the rectangle frame with your magic wand
Selections - Modify - Expand by 5
Open Paper 3 and paste as a new layer
When happy - Selections - Invert - Delete - Select None and move under the frame
Click inside the silver frame with your magic wand
Selections - Modify - Expand by 4
Open your tube and position in the frame
When happy - Duplicate and hide for now
Selections - Invert - Delete - Select None and move under the frame
Unhide the duplicate and erase the bottom of the tube that overhangs
Click on the black frame layer
Open Element 10 and paste as a new layer
Resize by 85 - Sharpen and position on the bottom of the frame
Duplicate - Image - Flip and Merge Down
Click on the paper layer - Open Element 46 and paste - Resize by 80 - Sharpen and place in the centre
Open Element 40 and paste - Resize by 50 -Sharpen - Place on the middle right of the frames
Duplicate - Image - Mirror and Merge Down
Click on the black frame again - Open Element 42 - Position on the top right
Duplicate - Image - Mirror - Image - Flip - Position and Merge Down
Open Element 8 and paste as a new layer - Position on the right - Duplicate - Image - Mirror and Merge Down
Send to the bottom - Apply Radiance to the tube layers at the settings above

Open Paper 2 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Timeless Beauty - PTU

 

 I am using the art of Maxine Gadd which you can find HERE
I purchased this while she was at PTE
I am using the PTU IB Maxine Gadd 17-1 by ChiChi Designz which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Eye Candy - Gradient Glow - Fat - White and Grey and then Thin - Grey and Sharpen

Open a new image 600x600
Open Words and paste as a new layer
Resize by 80 and place in the centre
Open Frame 2 and paste as a new layer
Resize by 75 - Sharpen and position in the centre
Click inside the centre with your magic wand
Selections - Modify - Expand by 5
Open Paper 6 and paste as a new layer
Open the tube and position in the frame - Duplicate and hide for now
Selections - Invert - Delete - Select None and move both under the frame
Unhide the duplicate and erase the overhanging part of the tube
Click inside the frame again - Modify by 5 as before - Open Diamonds
Position - When happy - Selections - Invert - Delete - Select None
Click on the frame layer
Open Doodle - Resize by 50 and position on the top right of the frame
Duplicate - Image - Mirror - Flip - Merge Down
Open Swirl and paste as a new layer - Image - Rotate - Free Rotate - 90 Left
Position on the left of the frame - Resize by 50 - Sharpen
Duplicate - Image - Mirror and Merge Down
Open String - Resize by 80 - Sharpen and send to the bottom
Open WordArt 2a and paste as a new layer - Resize by 60 - Sharpen
Image - Rotate - Free Rotate - 90 Left
Position in the left of the frame and apply Gradient Glow at the settings above

Open Paper 1 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers and merge visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Sweet As - PTU

 

 I am using the art of Tamandaya which you can find HERE
This was a prepaid tube and is no longer for sale
I am using the PTU Scrapkit Cherry Pop by Gemini Creationz which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Porcelain - Default - Set Blue to 0

Open a new image 600x600
Open Element 46 and paste as a new layer
Resize by 70 - Sharpen and position on the top left of the canvas
Duplicate - Image - Mirror - Flip and merge down
Open Element 44 and paste as a new layer - Resize by 90 - Sharpen and position on the top right
Duplicate - Image - Flip - Mirror and Merge Down
Open Element 2 and paste as a new layer
Resize by 80 - Sharpen and position in the centre
Click inside with your magic wand
Selections - Modify - Expand by 5 - Open Paper 2 and paste as a new layer
Open your tube and position - When happy - Duplicate and hide for now
Selections - Invert - Delete - Select None and move both the paper and tube under the frame
Unhide the duplicated tube and erase the overhanging parts with your eraer tool
Open Element 9 and paste as a new layer - Resize by 60 - Sharpen and position on the left of the frame
Duplicate - Image - Mirror and Merge Down
Open Element 20 and paste as a new layer - Resize by 40 - Sharpen
Position on the right of the frame - Duplicate - Image - Mirror and Merge Down
Open Element 39 and paste as a  new layer - Resize by 60 - Sharpen and position on the bottom right of the tag
Click on the paper layer - Open Element 61 - Resize by 80 - Sharpen and position in the centre
Click on the frame layer - Open Element 48 and paste as a new layer - Resize by 85 - Sharpen
Place at the top of the frame
Open Element 31 - Paste as a new layer - Resize by 60 - Sharpen and place on the top left
Open Element 40 and paste as a new layer - Resize by 70 - Sharpen
Position next to the cake on the bottom right
Apply Porcelain to both your tube layers at the settings above

Open Paper 7 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct licence numbers and copyright info - Merge Down
Save as a png - Add your name - Save again - Done

Memory Keeper - PTU

 

  I am using the art of Gaetano DiFalco which you can find HERE
I am using the PTU Scrapkit Rain of Blood by Abstract Creations and you can find this HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 49, 46, 128, 67
Eye Candy - Gradient Glow - Fat - White and Black

Open a new image 600x600
Open Element 26 and paste as a new layer
Position just off centre to the left
Open Element 38 and paste as a new layer
Resize by 75 - Sharpen - Position over the previous layer and change the opacity to both 0
Open Element 45 and paste as a new layer
Resize by 65 - Sharpen - Position above the bottom of the frame on the left
Open Element 5 and paste as a new layer - Resize by 60 - Sharpen
Position on the left of the previous layer and move toward the bottom
Open Element 9 and paste as a new layer
Resize by 70 - Sharpen and position at the bottom of the big gravestone layer
Open your tube you are using and paste as a new layer
I resized mine by 90 - Sharpened and positioned her so she was leaning on the big gravestone
Apply Radiance to your tube at the settings above
Open Element 33 and paste as a new layer
Resize by 75 - Sharpen - Image - Mirror and position on the right of the tube
Open Element 43 and paste as a new layer
Resize by 40 - Sharpen More - Position on the bottom left under the main gravestone - Duplicate twice and position next to each other
Merge all 3 together and Duplicate and position under the original layer
Open Element 4 and paste as a new layer
Resize by 80 - Sharpen - Position on the top left of the tag
Angle it to the left slightly - See my tag for placement
Open Element 60 - Resize by 85 - Sharpen and position on the grass layer
Apply Gradient Glow to the wordart at the settings above

Open Paper 10 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

3 Wishes - PTU

 

 I am using the art of Elias Chatzoudis which you can find HERE
I am using the PTU Scrapkti Genie in a Bottle by Designs by Sarah which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 128, 50, 128, 76
Eye Candy - Gradient Glow - Fat - Colours from your tube (Black, Pink, White)

Open a new image 600x600
Open Label 1 and paste as a new layer - Resize by 80 - Sharpen and position in the centre
Open Backdrop Town and paste as a new layer
Resize this by 60 and Sharpen - Position on the bottom of the Label
Open Frame 5 and paste as a new layer
Resize by 70 and position in the centre of the canvas
Apply Gradient Glow - Settings - Fat - Pink and Black
Open Smoke 2 and paste as a new layer
Resize by 70 - Sharpen and position on the right of the frame
Duplicate - Image - Mirror and Merge Down
Open Magic 1 and paste as a new layer - Resize by 80 - Sharpen and position on the left
Duplicate - Image - Mirror and Merge Down
Open your tube and paste as a new layer
Resize if necessary and position in the centre of the frame
Open Ribbon 2 and paste as a new layer - Resize by 60 - Sharpen and position at the bottom of the tube
Open Swirl 2 and paste as a new layer - Resize this by 90 - Sharpen and position over the previous layer
Open Word Art 1 and paste as a new layer
Resize by 65 - Sharpen - Position at the bottom of the tag
Apply Gradient Glow - Settings - Fat - Black and Pink
Erase some of the tube thats sticking out from the bottom
Apply Radiance to your tube at the settings above

Open Paper 2 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Bad Girl Attitude - FTU

 

 I am using the art of Wendy Gerber which you can find HERE
This is a fab tube loads of different colours!
I am using the FTU Scrapkit Attitude by Digi Mania and you can find this HERE
Mask of Choice
Font of Choice

Filters Used:
Mura's Meisters - Copies - Encircle
Xero - Radiance - 128, 50, 128, 82

Open a new image 600x600
Open Glitter Splat 3 and paste as a new layer
Send to the top right of your canvas
Open Glitter Splat 1 and paste as a new layer
Image - Flip and position on the bottom left
Open Bling 1 and paste as a new layer
Resize by 30 - Sharpen and Apply Encircle to the settings of your choice
Position to the top left of the tag
Click inside with your magic wand
Selections - Modify - Expand by 5
Open Paper 2 and paste as a new layer
Resize by 60 - Sharpen and position - When happy - Selections - Invert - Delete - Select None
Move under the frame
Open Bow 4 and paste as a new layer
Resize by 30 - Sharpen - Use the same settings as before with Encircle
Position over the frame layer
Open Twill 4 and paste as a new layer - Resize by 95 - Sharpen
Image - Rotate - Free Rotate - 45 - Left and position on the top of the frame
Open your tube and paste as a new layer
Resize if necessary and position in the front of the frame
Open Ribbon 1 and paste as a new layer
Position at the bottom of the tag and move under the tube
Apply Radiance to your tube at the settings above

Open Paper 4 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Dark Demonica - PTU

 

I am using the art of KiwiFire Storm which you can find HERE
This is a bonus tube you can get when purchasing any of his tubes
I am using the PTU Scrapkit Dark Secrets by Deviliah Dezines which you can find HERE or HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 128, 50, 128, 146

Open a new image 600x600
Open Paper 3 and paste as a new layer - Resize by 70 - Sharpen
Position in the centre - Click inside with your magic wand
Selections - Modify - Expand by 5
Open Paper 7 and paste as a new layer
Open your close up tube and position
When happy - Selections - Invert - Delete - Select None on both the tube and paper
Move under the frame and change the blend mode of the tube to Hard Light
Open your main tube and paste as a new layer
Position on the right of the frame
Open Element 85 - Resize by 60 - Sharpen - Image - Flip
Colorise to match your tube and send to the bottom
Open Element 38 and paste as a new layer
Resize by 50 - Sharpen More and send to the top right
Move to the bottom
Open Element 46 and paste as a new layer - Send to the bottom and resize by 85 - Sharpen
Click on the frame layer - Open Element 2 and paste as a new layer
Resize by 20 - Sharpen More and position on the middle left of the frame
Open Element 65 and paste as a new layer - Resize by 70 - Sharpen and position on the left of the tag
Erase some of the roots
Open Element 48 and paste as a new layer - Resize by 40 - Sharpen - Image - Mirror - Position on the bottom of the tree on the left
Clicking on the tree layer - Open Element 68 - Resize by 80 - Sharpen
Position in the centre - Apply Radiance to your tube at the settings above

Open Paper 3 and paste  as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Dark Fairy - PTU

 

 I am using the art of Spazz which you can find HERE
This tube won't be available until Monday
I am using the PTU Scrapkit Dark Whispers by Irish Princess Designs which you can find HERE or HERE

This kit will be released on Monday also!
Font of Choice

Filters Used:
Xero - Porcelain - Default - Set Blue to 0
Open a new image 600x600
Open Frame 1 and paste as a new layer - Position in the centre
Click inside with your magic wand
Selections - Modify - Expand by 5
Open Paper 7 and paste as a new layer
Resize and when happy - Selections - Invert - Delete - Select None and move underneath
Open Fence and paste as a new layer
Resize by 80 - Sharpen and position at the bottom of the frame
Move above the paper layer
Open Tree and paste as a new layer
Resize by 80 - Sharpen and position below the frame on the left
Duplicate - Image - Mirror and Merge Down
Open Grass - Resize by 90 - Sharpen
Place at the bottom and position below the frame
Staying on the previous layer
Open Sparkle Border and paste as a new layer - Image - Flip - Resize by 80 and Sharpen
Position at the top of the frame
Open Rainbow and paste as a new layer
Resize by 75 - Sharpen and position under the frame and in the middle of the tag
Open the Bee and the flower from your tube - Resize the bee and position on the top left
With your flower - Resize as you did the bee and position on the bottom of the tag
Open Sparkles - Resize by 80 - Sharpen and position on the bottom of the flower
Duplicate and position above the original - Merge Down
Open your tube and paste as a new layer - Resizing and place on the flower layer at the bottom
Apply Porcelain to your tube at the settings above

Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Timeless -

 

I am using the art of Anna Liwanag which you can find HERE
I am using the PTU Anna Liwanag Bundle Pack 48 by Abstract Creations which you can find HERE
Mask of Choice
Font of Choice

This is tut number 3 of 3

Filters Used:
Eye Candy - Gradient Glow - Fat - White and a purple colour from the glasses

Open a new image 600x600
Open Element 26 and paste as a new layer
Resize by 90 and Sharpen - Position in the centre
Open F2 and paste as a new layer
Resize by 60 - Sharpen and paste as a new layer
Position over the previous layer
Click inside the frame with your magic wand
Selections - Modify - Expand by 5
Open Paper 8 and paste as a new layer - Resize by 70 - Sharpen - Selections - Invert - Delete - Select None
Send to the bottom
Open e70 and paste as a new layer - Resize by 80 - Sharpen
Position on the top of the frame
Open e37 and paste as a new layer - Resize by 40 - Sharpen and position on the bottom right
Open your tube and paste as a new layer
Resize if necessary and position on the left of the frame
Click on the frame layer and open wa 3 - Paste as a new layer and resize by 50 - Sharpen
Position on the right of the frame and apply Gradient Glow at the settings above
Click on the frame layer - Open E23 and paste as a new layer - Resize by 40 - Sharpen
Image - Rotate - Free Rotate - 90 Left
Position on the left - Duplicate - Image - Mirror - Merge Down

Open Paper 1 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Moonlight Fascination - PTU

 

 I am using the art of Nocturne which you can find HERE
I am using the PTU Scrapkit Moonlight Serenade by Devilish Dezines which you can find HERE 

Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 34 and paste as a new layer
Resize by 60 and Sharpen
Position on the bottom - Duplicate - Image - Mirror and Merge Down
Open Frame 3 - Image - Mirror - Resize by 65 - Sharpen and place in the centre
Click inside with your magic wand
Selections - Modify - Expand by 5
Open Paper 3 and paste as a new layer
Selections - Invert - Delete - Select None and move under the frame
Open Element 22 and paste as a new layer
Resize by 35 - Sharpen More and position on the top left of the frame
Open your tube and paste as a new layer
Resize if necessary and position on the left of the tag
Open Element 28 - Resize by 60 - Sharpen - Position on the right of the frame
Click inside the frame with your magic wand
Selections - Modify - Expand by 5 - Open Element 1 and paste as a new layer
Resize by 50 - Sharpen - Selections - Invert - Delete - Select None and move under the frame
Click on the top of the frame - Open Element 45 - Image - Mirror
Resize by 50 - Sharpen and position on the top of the frame

Open Paper 6 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Mermaid's Sunset - PTU

 

 I am using the art of  Selina Fenech which can be found HERE
I am using the PTU Scrapkit Summer Sunset by Gemini Creationz which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Porcelain - Default - Set Blue to 0

Open a new image 600x600
Open Frame 5 and paste as a new layer - Resize by 80 and Sharpen - Position in the centre
Click inside all parts of the frame with your magic wand
Selections - Modify - Expand by 5
Open Paper 2 and paste as a new layer - Position and when happy - Selections - Invert - Delete - Select None
Move under the frame layer
Open Wave and paste as a new layer
Resize by 70 - Sharpen - Send to the bottom and move under the frame
Open Boat - Resize by 50 - Sharpen - Position on the right of the frame and move under on top of the wave layer
Open Netting - Resize by 60 - Sharpen and position on the top left corner of the frame
Duplicate - Image - Mirror and Merge Down when happy
Open Sign - Resize by 50 - Sharpen and position on the bottom left - See my tag for the placement
Open Seagull - Resize by 80 - Sharpen and position on the top right of the tag
Open Indian Grass and paste as a new layer - Resize by 70 - Sharpen - Position on the bottom left
Duplicate - Image - Mirror and Merge Down when happy
Open your tube as a new layer - Position in the centre of the tag
Open Pelican and paste as a new layer - Resize by 30 - Sharpen and position on the bottom left
Click on the paper layer - Open Glitter Spray - Resize by 50 - Sharpen and position on the left
Duplicate - Image - Mirror and Merge Down when happy

Open Paper 3 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Dark Swirls - PTU

 

 I am using the art of Anna Liwanag which you can find HERE
I am using the PTU Anna Liwanag Bundle Pack 48 by Abstract Creations which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Eye Candy - Gradient Glow - Fat  White and Black and Black and White
Xero - Radiance - 128, 88, 188, 100

This is tut number 2 of 3

Open a new image 600x600
Open Frame 1 and paste as a new layer
Resize by 70 - Sharpen and position in the centre
Click inside with your magic wand
Selections - Modify - Expand by 5
Open Paper 10 and paste as a new layer
Open your tube and position on the frame - Duplicate and hide for now
Selections - Invert - Delete - Select None and move under the frame
Unhide the duplicated tube and erase the overhanging parts
Apply Gradient Glow using White and Black Gradient Glow
Open Frame 5 and paste as a new layer - Resize by 80 - Sharpen and send to the bottom
Apply Gradient Glow using the Black and White settings
Open Element 6 - Paste as a new layer - Resiz by 50 - Sharpen
Image - Mirror - Position on the top left of the square frame
Duplicate - Image - Mirror - Flip and Merge Down - Move to above the frame layer
Click on the blacn frame - Open Element 55 and paste as a new layer
Position on the bottom - Duplicate - Image - Rotate - Free Rotate - 90 Left and position on the right of the frame - Merge Down
Apply Radiance to both tube layers at the settings above

Open Paper 6 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Fresh Summer - PTU

 

 I am using the art of Verymany which you can find HERE
I am using the PTU Scrapkit Fresh Mojito by Designs by Sarah which you can find HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Ribbon 6 and paste as a new layer - Resize by 80 - Sharpen and position toward the bottom
Open Frame 2 - Paste as a new layer and resize by 80 - Sharpen - Position to the right of the previous layer
Move underneath the ribbon
Open your tube and paste as a new layer - Place her on the ribbon so it looks as if she is sitting on it
Click inside the frame with your magic wand
Selections - Modify - Expand by 5
Open Paper 3 and paste as a new layer
Open a close up of your tube and position  - When happy - Selections - Invert - Delete - Select None
Move both under the frame and change the blend mode of the tube to Soft Light
Open Drink 2 and paste as a new layer - Resize by 50 and then by 60 - Sharpen More
Image - Mirror - Position on the right of the tube
Open Backdrop 2 and paste as a new layer
Resize by 70 - Sharpen and send to the bottom - Move to the top
Duplicate - Image - Mirror and move under the original - Merge Down
Open Bow 2 and paste as a new layer - Resize by 40 - Sharpen and position on the top right of the frame
Open Cupcake - Resize by 40 - Sharpen and position on the bottom left of the ribbon
Open Ribbon 4 - Paste as a new layer - Resize by 70 - Sharpen
Image - Mirror - Position above the ribbon layer
Open Rum and paste as a new layer - Resize by 30 - Sharpen and position behind the drink layer on the right
Open Lime 3 and paste as a new layer - Resize by 30 - Sharpen - Position behind the glass layer
See my tag for placement of the elements
Click on the frame layer - Open Flower 2 and paste as a new layer - Resize by 20 - Sharpen More - Position under the bow on the right
Duplicate twice more and place next to each other - Merge Down

Open Paper 7 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Written in the Stars - PTU

 

 I am using the art of Renee Biertempfel which you can find HERE
I am using thte PTU IB Renee Biertempfel 35-1 by ChiChi Designz which you can find HERE
Font of Choice

Filters Used:
Eye Candy - Gradient Glow - Medium - White

Open a new image 600x600
Open Frame 2 and paste as a new layer - Resize by 80 - Sharpen
Position in the centre
Click inside with your magic wand
Selections - Modify - Expand by 5
Open Paper 5 and paste as a new layer
Open your tube and paste as a new layer - Position in the centre - Duplicate and hide for now
Selections - Invert - Delete - Select None and move under the frame
Unhide the duplicated tube and erase the bottom of it
Click on the paper layer - Open Window and resize by 60 - Sharpen - Place under the tube and under the frame
Staying on the paper layer - Open Sunray and paste as a new layer - Position on the right of the frame
Open Glitter Mask and paste as a new layer - Resize by 80 - Sharpen
Send to the bottom and position in the centre
Click on the frame layer - Open Layer 2 and paste as a new layer
Resize by 80 - Sharpen and position - Erase any thats showing through the 2 tube layers
Click on the glitter mask layer and open Star Circle and paste as a new layer - Position
Click inside the frame with your magic wand - Selections - Modify - Expand by 5
Open your tube and place on the right - When happy with positioning - Selections - Invert - Delete - Select None
Move under the frame and move to above the paper layer
Change the blend mode to Luminace L
Open Wordart and paste as a new layer - Resize by 50 - Sharpen and position on the top right
Apply Gradient Glow at the settings above

Apply Drop shadows to your layers - Merge Visible
Add correct copyright and licence numbers - Merge Down
Save as a png - Add your name - Save again - Done\

Mermaid Ahoy - PTU

 

 I am using the art of Alex Prihodko which you can find HERE
I am using the PTU Scrapkit Ahoy by Devilish Dezines which you can find HERE or HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 118, 137, 140, 164

Open a new image 600x600
Open Frame 6 and paste as a new layer
Resize by 70 - Sharpen and position in the centre
Click inside both frames with your magic wand
Selections - Modify - Expand by 5
Open Paper 3 and paste as a new layer - Open a close up of your tube and paste in the frames - When happy
Selections - Invert - Delete - Select None and move both under the frame
Change the blend mode of the tube to Luminance L
Open Element 17 and paste as a new layer - Resize by 60 - Sharpen
Position on all 3 edges of the frame and merge down when happy
Open Element 37 - Resize by 40 - Sharpen and position on the bottom left
Open Element 11 and paste as a new layer - Resize by 80 - Sharpen
Place at the bottom and send to below the previous layer
Open your main tube and paste - Resize if necessary and position on the previous layer
Click on the frame layer - Open Element 2 and paste as a new layer - Resize by 70 - Sharpen and position at the top
Open Element 39 - Resize by 80 - Sharpen and send to the bottom
Open Element 24 - Resize by 30 - Sharpen More - Place behind the tube next to the crate
Open Element 30 - Resize by 30 and then by 60 - Sharpen More and position on top of the crate on the left
Duplicate - Resize by 80 - Sharpen and position next to the original
Open Element 51 and paste as a new layer - Resize by 80 - Sharpen and send to the bottom below the path layer
Click on the frame layer - Open Element 35 - Resize by 80 and position along the top
Open Element 25 and paste as a new layer - Resize by 80 - Sharpen - Send to the bottom - Duplicate - Image - Mirror and Merge Down
Apply Radiance to your tube at the settings above

Open Paper 4 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Gangsta Chick - PTU

 

I am using the art of Spazz which you can find HERE
I am using the PTU Scrapkit Bad Mamma Jamma made to match the tube by Kizzed by Kelz which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Eye Candy - Gradient Glow - Default - Colour - Grey
Xero - Radiance - 128, 85, 158, 76

Open a new image 600x600
Open Cityscene and paste as a new layer - Resize this by 130 - Sharpen
Position below the centre point
Open Frame 2 and paste as a new layer - Send to the bottom and move to the right
Click inside the frame with your magic wand - Selections - Modify - Expand by 5
Open Paper 5 and paste as a new layer
Open your close up tube and paste as a new layer
 Selections - Invert - Delete - Select None
Move both under the frame and change the blend mode of the tube to Screen
Open Glow Swirl and paste as a new layer
Send to the bottom right - Duplicate - Image - Mirror and Merge Down
Open Motorcycle and paste as a new layer
Image - Mirror - Position on the bottom left
Open Stars Spiral and paste as a new layer - Send to the bottom and move towards the top
Open your tube and paste as a new layer - Resize if necessary and place in the centre
Open Wordart - Resize by 40 - Sharpen and position to the right of the tube
Click on the frame layer - Open Dragon Tattoo - Resize by 40 - Sharpen - Apply Gradient Glow at the settings above
Image - Mirror - Position on the bottom right
Open Pug - Resize by 30 - Sharpen - Position on the right
Open Bomb - Resize by 40 - Sharpen - Image - Mirror - Position in front of the bike on the left
Open Crates and paste as a new layer - Resize by 40 - Sharpen - Position in front of the cityscape on the right
Open Bug - Resize by 40 - Sharpen - Position on the left of the cityscape and move underneath
Place it so it looks as if it is peeking over the city
Open Sparkle and paste as a new layer - Position over the cityscape layer
Apply Radiance to the tube at the settings above

Open Paper 9 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done