VIP Festive - PTU

I am using the art of Zlata_M which you can find HERE

I am using the matching kit Festive Evening by Marie made to match the tube and you can find this HERE

Mask of Choice

Font of Choice

Filters used:

Xero - Radiance - 128, 50, 49, 52

Eye Candy - Gradient Glow - Fat - White

Open a new image 600x600

Open Element 8 and paste as a new layer

Resize by 110 - Sharpen - More - Position in the centre at the top

Click inside with your magic wand - Selections - Modify - Expand by 5

Open Paper 8 and paste as a new layer

Open your close up tube and paste as a new layer

Position in the frame 

When happy - Selections - Invert - Delete - Select None on both layers

Move both under the frame layer

Open Element 68 - Paste as a new layer - Resize by 50 - Sharpen - Position on the top left of the star frame

Apply Gradient Glow to it at the settings above

Open Element 32 and paste as a new layer - Resize by 30 - Sharpen More - Position on the left of the star

Send to the bottom and arrange so you can see it

Open Element 77 - Resize by 60 - Sharpen - Paste as a new layer and send to the bottom - Moving underneath the other layers

Open Element 59 - Paste and resize by 20 - Sharpen More - Position on the bottom left of the tag

Open Element 52 and resize by 40 - Sharpen and position next to the previous layer

Open Element 72 and repeating the above steps - Position next to the wine bottle

Repeat the above steps with Element 5 and position next to the necklace

Open Element 23 and paste - Resize by 80 and send to the bottom

Open Element 21 and paste as a new layer - Resize by 80 - Sharpen - Place at the top right corner

Open Element 14 and paste as a new layer - Resize by 80 - Sharpen and send to the bottom

Open your main tube as a new layer - resizing if necessary - Paste as a new layer and position on the right - Apply Radiance at the settings above

Open Paper 4 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge group

Add drop shadows to your layers - Merge Visible

Add correct copyright and licence information - Merge Down

Save as a png - Add your name - Save again - Done

Pretty Gothic - PTU

 

 I am using the art of Zlata which you can find HERE
I am using the PTU Scrapkit Pretty Poison by Nicky made to match the tube which you can find HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Frame 4 and paste as a new layer
Resize by 65 - Sharpen and position to the left
Click inside with your magic wand
Selections - Modify - Expand by 5
Open Paper 4 - Resize by 60 - Sharpen
Selections - Invert - Delete - Select None and move under the frame
Open Scattered birds - Resize by 70 - Sharpen - Position to the left
Duplicate - Image - Mirror - Merge Down - Send to the bottom and move to the top
Open Frame 3 - Paste as a new layer - Resize by 80 - Sharpen - Move to the right and send to the bottom
Open Castle - Paste as a new layer and resize by 60 - Sharpen - Duplicate and hide for now
Move the original under the frame on the left hand side
Unhide the duplicate and move to the top - Erase all but the tallest turrett - See my tag for the idea
Open Butterflies and Sparkles and paste as a new layer above the frame
Resize by 70 - Sharpen and position
Open Grass - Image - Mirror - Resize by 60 - Sharpen and position on the bottom
Open Grass 3 - Resize by 40 - Sharpen - Position on the bottom right
Open Flowers 2 - Resize by 50 - Sharpen and position on the top left of the frame
Duplicate - Image - Mirror and Merge Down
Open Poison - Resize by 80 and then by 30 - Sharpen - Position on the bottom left of the tag
Open Scattered Petals - Resize by 80 - Sharpen and send to the bottom
Click on the paper layer - Open Sparkles and position toward the top of the paper
Click on the frame layer - Open Headstone 2 and paste as a new layer - Resize by 60 - Sharpen - Position on the bottom left corner
Open your tube and paste as a new layer - Resizing if necessary - Position on the right of the tag

Open Paper 18 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Roxy Steampunk - PTU

I am using the art of Spazz which you can find HERE
I am using the PTU Scrapkit Steampunk by Bibi and you can find this HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 72 and paste as a new layer - Resize by 80 - Sharpen  - Position in the centre
Click inside the frame with your magic wand
Selections - Modify - Expand by 5
Open Paper 5 and paste as a new layer
Open a close up of your tube and position
When happy - Selections - Invert - Delete - Select None on both layers
Move under the frame and change the blend mode of the tube to Difference
Open your main tube as a new layer
Position on the right of the frame
Open the Bird and Chest thats with the tube and paste them as a new layer
Resize if necessary and position behind the tube on the left
Open Element 135 and paste - Resize by 80 - Sharpen and send to the bottom
Open Element 56 and paste as a new layer - Resize by 90 - Sharpen - Send to the bottom and place under Roxy's feet and the chest
Open Element 58 - Image - Mirror - Resize by 80 - Sharpen - Send to the bottom right
Open Element 28 - Resize by 30 - Sharpen More and paste as a new layer - Image - Mirror
Place on the far right of the path
Duplicate - Image - Mirror and place next to the chest on the left - Duplicate and place below the original - Merge down
Open Element 79 - Resize by 70 - Sharpen - Place on the left and move under the tube
Click on the paper layer in the frame - Open Element 41 - Resize by 60 - Sharpen and position
Open Element 20 - Resize by 30 and then by 80 - Sharpen More - Position above the stopwatch layer
Open Element 65 and paste as a new layer - Send to above the gateway layer

Open Paper 15 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Gatekeeper - PTU

 

 I am using the art of Michael Calandra which you can find HERE
I am using the PTU IB Scrapkit Michael Calandra 20-3 by Ladyhawwk Designs which you can find HERE
Font of Choice

Open a new image 600x600
Open Frame 1 and paste as a new layer
Resize by 90 - Sharpen and position in the centre
Open Element 6 and position in the centre of the frame lining up the bottom of the gates to the frame
Open Wordart and paste as a new layer - Send to the bottom
Click inside your frame with your magic wand
Selections - Modify by 5 - Open your tube and paste as a new layer - Layers - Duplicate and hide for now
Place the original tube below the frame - Selections - Invert - Delete - Select None
Unhide the duplicate and making sure its at the top - Erase the overhanging parts - See my tag for placement
Open Element 11 and paste as a new layer - Resize by 60 - Sharpen
Position on the top right of the gates
Duplicate - Image - Mirror and Merge Down
Open Element 2 - Resize by 40 - Sharpen - Position on the bottom right - Duplicate - Image - Mirror
Merge Down - Paste again - Resize as above - Position next to the original
Duplicate - Image - Mirror and Merge Down - Merge this and the previous layer together
Click on the frame layer - Open Element 17 and paste on the top of the frame
Staying on the frame layer - Open Element 14 - Resize by 50 - Sharpen
Position on the top right - Duplicate - Image - Mirror and Merge down
Open Element 10 - Paste as a new layer on the bottom of the frame
Resize by 50 - Sharpen and position

Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Rasta Punk - PTU

I am using the art of Danny Lee which you can find HERE
I am using the PTU Scrapkit Rasta Punk which was made to match the tube by Bibi and you can find this HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 79 - Paste as a new layer and resize by 70 - Sharpen
Position in the centre - Click inside all frames with your magic wand
Selections - Modify - Expand by 5
Open Paper 1 and paste as a new layer - I colorised this to match my tag
Open your close up tube and position how you like in the frames
When happy - Selections - Invert - Delete - Select None and move both under the frame
Change the blend mode of the tube to Hard Light
Open Element 77 and paste as a new layer - Position at the bottom
Open Element 20 - Image - Mirror - Resize by 30 - Sharpen and position above the previous layer toward the top
Open Element 11 and paste as a new layer - Resize by 80 - Sharpen - Send to below the frame layer and move toward the bottom
Open Element 85 and paste as a new layer
Position over the cityscape layer to the right - Duplicate - Image - Flip and Merge Down
Open Element 25 - Resize by 60 - Sharpen and position to the right of the tag
I also colourised this to match my tube
Open Element 67 - Resize by 50 - Sharpen and position in the centre of the previous layer
Open your main tube and paste as a new layer - Position her in the centre
Open Element 66 - Image - Mirror and paste as a new layer on the top right of the frame
Click on the cityscape layer and open element 3 - Paste as a new layer
Open Element 73 - Resize by 50 - Sharpen - Position on the bottom left
Open Element 53 - Paste as a new layer and position on the top right - Send to the bottom

Open Paper 8 and paste as a new layer - I colourised mine pink to match my tube - Add a mask of choice - Merge Group
Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Cruela's Realm - PTU

 

 I am using the art of Vika Misticheskaya which you can find HERE
I am using the PTU Scrapkit Cruela made to match the tube by SkyScraps which you can find HERE
Font of Choice

Open a new image 600x600
Open Elemet 67 and paste as a new layer
Resize by 70 - Sharpen and position in the centre
Open Element 68 and paste as a new layer - Resize by 70 - Sharpen
Position on top of the frame
Click inside this frame with your magic wand
Selections - Modify - Expand by 5
Open Paper 5 and paste as a new layer
Open a close up of your tube and paste as a new layer
Selections - Invert - Delete - Select None and move both the paper and tube layer under the frame
Change the blend mode of the tube to Hard Light
Open your main tube and paste as a new layer - Place her in front of the frame to the right
Open Element 25 and paste as a new layer - Resize by 60 - Sharpen and place behind the tube on the left
Open Element 10 and paste as a new layer - Resize by 70 - Sharpen - Send to the bottom
Open Element 12 and paste as a new layer - Resize by 70 - Sharpen and position to the left behind the previous layer
Open Element 2 and paste as a new layer - Resize by 70 and then by 30 - Sharpen and position on the right of the tube
Open Element 92 - Resize by 60 - Sharpen - Send to the bottom and arrange to the top slightly
Open Element 55 and paste as a new layer - Resize by 70 and then 80 - Sharpen and position on the bottom right of the tube - Moving underneath
Open Element 24 - Resize by 80 - Sharpen - Send to the bottom right - Duplicate - Image - Mirror and Merge Down
Open Element 75 - Paste as a new layer and resize by 60 - Sharpen - Send to below the tube layer along the bottom
Open Element 29 and paste as a new layer - Move above the trees layer and place in the centre
Click on the close up tube layer - Open Element 16 and paste as a new layer - Resize by 70 - Sharpen and position

Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - Merge down
Save as a png - Add your name - Save again - Done

Deserter - PTU

 

 I am using the art of Tin which you can find HERE
I am using the PTU Scrapkit Bundle Tin Package 5 by Ladyhawwk Designs which you can find HERE
This is tut 3 of 3 using this gorgeous pack
Mask of Choice
Font of Choice

Filters Used:
Eye Candy - Gradient Glow - Fat - White and Green

Open a new image 600x600
Open Frame 2 and paste as a new layer
Resize by 70 -Sharpen - Image - Rotate - Free Rotate - 90 Left
Click inside all frames with your magic wand
Selections - Modify - Expand by 5
Open Paper 6 and paste as a new layer
Open your tube and position parts of it in the frame
When happy - Selections - Invert - Delete - Select None on the tube and paper layers
Move under the frame - Merge the tube layers together and change the blend mode to Luminance L
Open Wordart 1 and paste as a new layer - Resize by 70 - Sharpen and position on the bottom of the frame
Apply Gradient Glow at the settings above
Open your tube and paste as a new layer - Position under the wordart to the left
Open Element 41 - Resize by 80 - Sharpen - Send to the bottom
Layers - Duplicate - Image - Mirror - Merge Down
Open Element 15 and paste as a new layer
Send to above the previous layer - Click inside both frames with your magic wand
Selections - Modify - Expand by 5 - Open Paper 5 and paste as a new layer
Selections - Invert - Delete - Select None and move under the frame
Open Element 24 - Paste as a new layer - Resize by 50 - Sharpen - Send to the bottom right - Duplicate - Image - Mirror - Flip and Merge Down
Open Element 18 - Resize by 70 - Sharpen and send to the bottom

Open Paper 3 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Dance - PTU

 

I am using the art of PinUpToons which you can find HERE
I am using the PTU Bundle Pack PUT Package 171 by Foxy's Designz which you can find HERE
This is tut 3 of 3 using the pack
Font of Choice

Open a new image 600x600
Open Frame 4 and paste as a new layer
Resize by 60 - Sharpen - Position just above the centre
Click inside with your magic wand
Selections - Modify - Expand by 6
Open Paper 2 and paste as a new layer - Resize by 70 - Open Paper 9 and paste as a new layer - Resize by 50 - Open your close up tube and position in the frame
When happy - Selections - Invert - Delete - Select None and move under the frame
Change the blend mode of the second paper layer (the lighter one) to Hue
Change the blend mode of the close up to Luminance
Open your main tube and paste as a new layer
Position on the left of the frame
Open Element 6 - Paste as a new layer - Position on the left - Duplicate - Image - Mirror and merge down
Open Element 29 - Paste as a new layer - Resize by 20 and then by 80 - Sharpen - Position on the frame
Duplicate as many times as you like and place around the frame
Merge down when happy
Open Element 2 - Image - Mirror - Resize by 60 - Sharpen - Move to the left and under the tube
Open Element 7 and paste as a new layer - Send to the bottom and above the radio
Open Element 23 - Resize by 40 and then by 80 - Sharpen and position on the right of the tube
Open Element 22 and paste as a new layer - Send to the bottom

Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Oriental - PTU

 

 I am using the art of KiwiFireStorm which you can find HERE
I am using the PTU Scrapkit Geisha by Bibi which you can find HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 46 and paste as a new layer
Reseize by 50 - Sharpen and Place above centre
Open Element 1 and paste as a new layer
Resize by 55 - Sharpen and position on the bottom right
Open Element 68 and paste - Resize by 70 - Sharpen and position on the top right of the blind
Open Element 17 - Resize by 30 - Sharpen and position on the bottom right of the tag - Move under the bear
Open Element 45 and paste as a new layer - Send to the bottom
Open your tube and paste as a new layer
Resize if necessary and position on the bottom left
Open Element 56 and paste as a new layer - Resize by 60 - Sharpen
Position on the top left of the blinds - Duplicate - Image - Mirror - Flip and Merge Down
Open Element 54 - Resize by 70 - Sharpen
Send to the bottom and position above the blind layer
Open Element 82 - Resize by 80 - Sharpen - Image - Mirror - Position on the right of the tag
Open Element 59 - Resize by 50 - Sharpen - Position on the left of the tube and move below
Open Element 58 - Resize by 60 - Image - Mirror - Position next to the previous layer
Open Element 53 - Resize by 60 and then by 70 - Sharpen and position on the bottom left of the tag - Move above the blinds layer
Staying on the blinds layer - Open Element 36 and paste as a new layer - Position on the top right

Open Paper 2 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Chained - PTU

I am using the art of Gaetano Di Falco which you can find HERE
I am using the PTU IB Gaetana Di Falco 12-2 by Babycakes Scraps which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Eye Candy - Gradient Glow - Fat - White and Red

Open a new image 600x600
Open Element 19 and paste as a new layer
Resize by 70 - Sharpen
Position to the right just off centre
Click inside the frame with your magic wand
Selections - Modify - Expand by 5
Open Paper 5 and paste as a new layer
Open your close up tube and position where you think best in the frame
When happy - Selections - Invert - Delete - Select None and move both under the frame
Change the blend mode of the tube to Lighten
Open Element 13 and paste as a new layer - Resize by 40 - Sharpen
Position on the bottom right of the frame
Open Element 14 - Resize by 40 - Sharpen More and position above the frame to the right
See my tag for placement idea's
Open your main tube and paste as a new layer
Position this on the left of the tag
Click on the frame layer - Open Element 22 - Paste as a new layer and position on the right
Duplicate - Image - Mirror and merge down
Click on the bottom right of the frame
Open Element 23 - Resize by 50 - Sharpen and position - Duplicate - Image - Mirror - Merge Down
Click on the top of the frame - Open Element 26 - Resize by 50 - Sharpen and position in the centre
Duplicate - Resize by 80 - Sharpen - Place on the right of the original
Duplicate - Image - Mirror and merge down when happy
Apply Gradient Glow to the wordart layer at the settings above
Click on the frame layer again and open Element 17 - Resize by 50 - Position in the centre - Apply Gradient Glow using the settings above
Duplicate - Resize by 80 - Position on the right - Duplicate - Image - Mirror and merge down when happy

Open Paper 3 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Innocence Fallen - PTU

 

 I am using the art of Kurama Phoenix which you can find HERE
I am using the PTU Scrapkit Fallen by Designs by Sarah which you can find HERE
Font of Choice

Filters Used:
Xero - Radiance - 255, 88, 91, 67

Open a new image 600x600
Open Print 4 and paste as a new layer - Resize by 80 and position in the centre
Open Print 1 and paste - Position at the bottom of all the layers
Open Moon Clouds 2 and paste - Resize by 60 - Sharpen and position to the top right
Open Frame 1 and paste - Position in the centre
Open Lights and paste as a new layer - Resize by 80 - Sharpen and position
Click inside the frame with your magic wand
Selections - Modify - Expand by 5
Open Paper 5 and paste as a new layer
Open your tube and position on the left - Duplicate and hide for now
Selections - Invert - Delete - Select None on both the tube and paper layer
Unhide the duplicate and making sure its at the top - Erase the overhanging parts of the tube
Click on the frame layer - Open Print 3 - Resize by 50 - Sharpen - Position on the top left
Duplicate - Image - Mirror - Image - Flip - Merge Down
Open Mask 2 and paste - Send to the bottom
Open Mask 1 - Resize by 90 - Sharpen and send to above the previous mask layer
Click on the paper layer - Open your close up tube and paste as a new layer
Erase the overhanging parts and change the blend mode to Darken
Open Bow 1 and paste as a new layer - Resize by 60 - Sharpen - Position on the top left of the frame
Apply Radiance to your tube layers at the settings above

Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Goth Nursing Hood - PTU

I am using the art of Spazz which you can find HERE
I am using the PTU Scrapkit Dark Fairy by Bibi and you can find this HERE
Mask of Choice
Font of Choice

Filters Used:
Xero Radiance - 128, 50, 128, 158

Open a new image 600x600
Open Element 89 and paste as a new layer
Resize by 80 - Sharpen and place in the centre
Open Element 35 and paste as a new layer - Resize by 70 - Sharpen
Position at the bottom
Open Element 49 and paste as a new layer
Position this in the centre and resize by 90
Open Element 47 and paste as a new layer
Resize by 70 - Sharpen and position on the right - Move under the house layer
Open Element 68 and paste as a new layer
Resize by 60 - Sharpen - Position on the bottom right of the house
Duplicate - Image - Mirror and position on the far left
Duplicate 3 more times and fill the space up - Merge these layers together
Open Element 53 - Paste as a new layer and position on the top right
Move to the bottom of all the layers
Open Element 48 - Resize by 60 - Sharpen and position on the left of the house
Move under the grass layers - Duplicate - Image - Mirror and merge down
Open Element 38 and paste as a new layer
Position on the top left of the tag and send to the bottom
Open Element 42 - Image - Mirror and resize by 80 - Sharpen and send to the bottom
Click on the grass layer - Open Element 32 - Resize by 80 - Sharpen and paste as a new layer
Open Element 29 - Resize by 60 - Sharpen and send to the far left
Move to the bottom
Open your tube and paste as a new layer - Resizing if necessary - Position on the right
Apply Radiance at the settings above
Open Element 23 and paste as a new layer - Resize by 60 - Sharpen and position on the left of the tube

Open Paper 10 - Resize by 70 - Sharpen and send to the bottom - Apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Jersey Girl - PTU

I am using the art of Anna Liwanag which you can find HERE
I am using the PTU Scrapkit Jersey Girl by Kizzed by Kelz which you can find HERE 

This is part of the collab
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 128, 149, 128, 76

Open a new image 600x600
Open Bar and paste as a new layer
Paste as a new layer and position in the centre
Open Speakers and paste as a new layer
Resize by 60 - Sharpen and position in the top centre of the bar
Click on the bar layer and open sparkles - Paste as a new layer and position
Click on the bar layer and Open the belt - Paste as a new layer and position on the purple part
Open Pillar - Paste as a new layer and position on the left of the bar
Open Cocktail Sign and paste as a new layer - Resize by 60 - Sharpen
Position on the top left of the tag
Open ipod - Paste as a new layer - Resize by 60 - Sharpen - Position on the bottom right of the pillar - Place behind
Open Cocktail and paste - Resize by 50 - Sharpen and position on the bottom left
Open Disco Ball and paste as a new layer
Position on the top left and send to the bottom
Open Lips - Resize by 40 - Sharpen and position on the top right under the speakers
Open Table and paste as a new layer - Resize by 50 - Sharpen and position on the bottom left behind the pillar above the ipod
See my tag for placement idea's
Open your tube and paste as a new layer - Position on the right
Open Whip - Resize by 60 - Sharpen - Position behind the tube
Apply Radiance at the settings above

Open Paper 3 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Beyond the Darkness - PTU

I am using the art of Anna Marine which you can find HERE
I am using the PTU Scrapkit Erudit by Devilish Dezines which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Eye Candy - Gradient Glow - Fat - White and Purple
Xero - Radiance - 76, 124, 43, 91

Open a new image 600x600
Open Element 14 and paste as a new layer
Resize by 60 - Sharpen and position in the centre
Open Element 43 and paste as a new layer
Resize by 80 - Sharpen and position on the left of the previous layer
Duplicate - Image - Mirror and merge down when happy
Open Element 9 and paste - Resize this by 70 - Sharpen and position on the left of the frame
Open Element 29 - Resize by 30 - Sharpen and position on the bottom right of your tag
Open Element 46 and paste this as a new layer
Resize by 50 - Sharpen and send to the bottom - Position toward the top so the top of the layer is above the pillars
Staying on this layer - Open Element 37 - Resize this by 60 - Sharpen and position on that layer
Click on the curtain layer - Open Element 20 - Resize by 70 - Sharpen
Position toward the centre - Making sure its under the flower layer on the bottom right
Open Element 7 - Resize by 60 - Sharpen - Send to the top - Duplicate - Image - Flip
Merge these together and send to the bottom
Open Element 30 - Resize by 65 - Sharpen and position at the bottom of the tag
Open Element 18 - Resize by 50 - Sharpen - Position at the top of the pillars
Apply Gradient Glow to the wordart at the settings above
Open Element 40 - Send to the bottom above the dotted layer and arrange at the top
Open Element 50 - Resize by 70 - Sharpen and send to the bottom - Move to the bottom of the layers
Open your tube and paste as a new layer
Place at the bottom left of the tag and apply Radiance at the settings above

Open Paper 2 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group - Duplicate - Merge Down
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Freedom - PTU

I am using the FTU tube by Peony which you can find HERE
I am using the PTU Scrapkit Freedom by PO Concept which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Eye Candy - Gradient Glow - Fat White and Red

Open a new image 600x600
Open Element 33 and paste - Resize by 80 - Sharpen and position in the centre
Open Element 64 and paste - Position over the previous layer
Apply Gradient Glow at the settings above
Click inside the frame with your magic wand
Selections - Modify - Expand by 6
Open Paper 15 - Resize by 70 - Open your tube and position
Duplicate and hide for now
Selections - Invert - Delete - Select None on the tube and paper layer - Move under the frame
Unhide the duplicate tube and send to the top
Using your eraser tool and erase the overhanging parts
Click on the blue frame layer - Open Element 51 and paste - Resize by 30 - Sharpen
Position on the middle left of the frame - Duplicate - Image - Mirror - Merge Down
Open Element 12 - Image - Mirror - Resize by 40 - Sharpen and position on the bottom right
Click on the paper layer - Open Element 18 and paste as a new layer
Open Element 151 and paste - Send to the bottom
Open Element 26 - Resize by 90 - Sharpen - Send to the bottom
Open Element 36 - Resize by 20 - Sharpen More - Position on the top left of the frame

Open Paper 13 - Paste as a new layer and send to the bottom - Apply a mask of choice and merge down
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Musically Beautiful - PTU

I am using the art of Tin which you can find HERE
I am using the PTU Scrapkit Bundle Tin Package 5 by Ladyhawwk Designs which you can find HERE
This is tut 2 of 3 using this gorgeous pack
Mask of Choice
Font of Choice

Filters Used:
Eye Candy - Gradient Glow - White - 3
Xero - Radiance - 67, 128, 128, 64

Open a new image 600x600
Open Frame 1 and paste as a new layer
Resize by 85 - Sharpen - Click inside all parts with your magic wand
Selections - Modify - Expand by 5
Open Paper 7 and paste as a new layer
Open your tube and position in the frame
Duplicate and hide for now
Selections - Invert - Delete - Select None on both the tube and paper layers
Move under the frame
Unhide the duplicated tube and erase the overhanging parts
Open Wordart 2 - Paste as a new layer - Resize by 60 - Sharpen
Position on the bottom of the frame and apply Gradient Glow at the settings above
Open Element 2 - Resize by 50 - Sharpen - Position on the top left of the frame moving under the tube
Open Element 38 - Resize by 60 - Sharpen - Place at the top and send to the bottom
Open Element 28 - Paste as a new layer - Resize by 60 - Sharpen
Image - Flip - Send to the bottom and arrange at the top
Open Element 17 - Resize by 60 - Sharpen - Position in the centre and send to the bottom
Open Element 35 and paste as a new layer - Resize by 40 - Sharpen
Position on the bottom right and place under the wordart
Click on the frame layer - Open Element 34 - Resize by 70 - Sharpen and position
Apply Radiance to your tube layers at the settings above

Open Paper 5 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Bad Girl - PTU

 

 I am using the art of Anna Liwanag which you can find HERE
I am using the PTU IB Jamie Kidd 58-2 by TammyKat Dezigns which you can find HERE
Font of Choice

Open a new image 600x600
Open Frame 1 and paste as a new layer
Resize by 80 - Sharpen - Position in the centre
Click inside both frames with your magic wand
Selections - Modify - Expand by 6
Open Paper 4 and position in the frame
Open a close up of your tube and position in one of the frames
Mirror and position in the opposite frame
Selections - Invert - Delete - Select None on both the tube and paper layers
Move all under the frame and change the blend mode of the tubes to Hard Light
Open Element 9 - Paste as a new layer - Resize by 70 - Sharpen - Position on the top left of the frame
Duplicate - Image - Mirror - Merge Down - Duplicate - Image - Flip and position on the bottom
Merge these layers together
Open Element 13 and paste as a new layer - Resize by 40 - Sharpen
Position on the left side of the frame - Duplicate - Resize by 80 - Sharpen - Move below the original
Merge these layers together - Duplicate - Image - Mirror - Merge Down
Open Wordart 1 and paste as a new layer - Resize by 50 - Sharpen
Paste as a new layer - Using your selection tool - Draw around the bad word and cut
Paste as a new layer - Image - Rotate - Free Rotate - 90 Left and position on the left of the frame
On the Girl layer - Image - Rotate - Free Rotate - 90 Right and position on the right of the frame
I colourised mine to match my tag
Open Element 15 and paste as a new layer
Resize ny 80 - Sharpen and position to the left - Duplicate - Image - Mirror - Merge Down and send to the bottom
Open Element 11 and paste as a new layer - Position in the centre and move above the previous layer
Open your tube and paste as a new layer - Position in the centre
Duplicate and hide for now - On the mask layer - Selections - Select all - Float - Defloat - Selections - Invert - Delete on the tube layer
Unhide the duplicate and making sure its at the top - Erase the bottom of the tube

Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Punk Attitude - FTU

I am using the art of Spazz which you can find HERE
I am using the FTU Scrapkit Punked by Digi Mania which you can find HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Frame 1 and paste as a new layer
Resize by 70 - Sharpen
Click inside with your magic wand
Selections - Modify - Expand by 5
Open Paper 2 and paste as a new layer
Open your tube and paste - Position in the frame - resizing if necesary
Selections - Invert - Delete - Select None on the paper and tube layer
Move under the frame and change the blend mode to Dissolve
Merge these layers together
Image - Rotate - Free Rotate - 30 - Left - Position at the top left
Open Twil 2 - Resize by 90 - Sharpen - Angle it so it fits the top of the frame
Open Brad 1 - Resize by 60 - Sharpen - Position on the bottom of the frame
Open Lp's and CD's and paste as a new layer
Send to the bottom - Position to the left - Duplicate 3 more times and position next to one another - Merge these down
Open Lava Lamp 2 and paste as a new layer - Resize by 80 - Sharpen and position on the bottom left
Open Water Droplets 3 and paste - Send to the bottom
Open Water Droplets 1 - Paste as a new layer - Rotate - 25 Right
Open Water Droplets 2 - Paste and rotate by 45
Open Ribbon 1 - Image - Mirror - Send to the bottom
Open Ribbon 5 - Image - Mirror - Flip - Position at the top and move to the bottom
Open your main tube and paste - Resizing if necessary - Position to the right

Open Paper 8 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Dark Dex - PTU

I am using the art of Christine Marie Kotlark which you can find HERE

I am using the PTU Scrapkit Dexter made to match the kit by Tiny Turtle Designs which you can find HERE

Mask of Choice

Font of Choice

Filters Used:

Eye Candy - Gradient Glow - Red and White - Fat

Xero - Radiance - 188, 134, 185, 173

Open a new image 600x600

Open Element 108 and paste as a new layer - Resize by 70 - Sharpen

Position to the left of the tag

Click inside with your magic wand

Selections - Modify - Expand by 5

Open Element 37 and paste as a new layer

Open your close up tube and position in the frame

Selections - Invert - Delete - Select None and move both under the frame

Change the blend mode of the tube to Luminance L

Open Element 140 - Paste as a new layer - Resize by 80 - Sharpen

Position at the top of the frame and apply Gradient Glow at the settings above

Open Element 133 and paste as a new layer

Send to the bottom and move to the right a little

Open your main tube and paste - Resizing if necessary - I Mirrored mine and resized by 75 - Sharpen

Position him on the right of the frame

Open Element 192 and paste - Resize by 60 - Sharpen and position to the left of the frame

Open Element 178 - Resize by 40 and then again by 60 - Sharpen More - Position on the left of the frame in the middle of the candle

Click on the frame layer - Open Element 105 - Resize by 70 - Sharpen and position behind the tube

Apply Radiance to your tube at the settings above

Open Element 35 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group

Add drop shadows to your layers - Merge Visible

Add correct copyright and licence information - Merge Down

Save as a png - Add your name - Save again - Done

Paradise - PTU

 

 I am using the art of Verymany which you can find HERE
I am using the PTU Scrapkit Rosemary by Bibi made to match the tube which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 76, 134, 185, 124

Open a new image 600x600
Open Element 64 and paste as a new layer - Resize by 80 - Sharpen and position in the centre
Open Element 97 and paste as a new layer - Resize by 85 - Sharpen and position over the previous layer
Open Element 2 and paste as a new layer - Resize by 70 - Sharpen and position in the centre
Click inside with your magic wand
Selections - Modify - Expand by 5 - Open Paper 5 and paste as a new layer
Open your close up tube and position in the frame
Open Element 51 and paste as a new layer - Resize by 70 - Sharpen
Selections - Invert - Delete on all 3 layers and move under the frame layer
Change the blend mode of the close up to Overlay
Open Element 43 and paste - Resize by 95 and Place on the right of the frame
Open Element 29 - Image - Mirror and place on the bottom of the previous layer
Open Element 62 - Paste as a new layer - Resize by 50 - Sharpen and position on the bottom right
Open Element 21 and paste - Resize by 40 - Sharpen More and place on the top of the frame
Open Element 4 and paste - Position on the right of the sign
Open Element 87 and paste as a new layer - Resize by 50 - Sharpen and position on the bottom left
Open Element 75 and paste as a new layer - Resize by 60 - Sharpen and position on the bottom right
Open Element 3 - Resize by 30 - Sharpen More and position above the cushions
Open Element 20 and paste as a new layer - Resize by 40 - Sharpen and position on the top left
Open your main tube as a new layer and position her so she is sitting on the cushions
Apply Radiance to her at the settings above

Open Paper 2 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Steampunk Me - PTU

 

 I am using the art of Enamorte which you can find HERE
I am using the PTU Scrapkit Steampunk by Bibi's Collection which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Porcelain - Default - Set Blue to O
Xero - Clarity - Default

Open a new image 600x600
Open Element 11 - Paste as a new layer and resize by 60 - Sharpen - Image - Mirror and position on the right
Open Element 61 and paste - Resize by 70 - Sharpen - Image - Flip
I colorised mine to match my tube and position at the bottom
Open Element 119 and paste - Resize by 50 - Sharpen and position this in the centre
Open Element 65 and paste as a new layer
Resize by 80 - Sharpen and position over the previous layer
Open Element 86 - Resize by 60 - Sharpen - Image - Mirror
Position this on the far left of the tag
Open Element 128 and paste as a new layer - Resize by 40 - Sharpen
Position toward the top of the tag
Open Element 53 and paste as a new layer - Resize by 50 and Sharpen
Image - Mirror and position to the left
Duplicate this layer and hide for now
Open Element 45 and paste as a new layer - Resize by 30 - Sharpen and position on the bottom left below the tower
Open Element 126 - Resize by 60 - Sharpen and position toward the top
Open Element 133 - Position this toward the top of the layers
Open Element 58 - Resize by 80 - Sharpen and position in the centre
Unhide the duplicate leaf branch layer and making sure its at the top
Arrange on the right of the archway
Open Element 66 and paste as a new layer - Resize by 70 - Sharpen
Paste on the top right of the archway - Duplicate - Image - Mirror - Duplicate and position at the top centre of the archway
Merge these 3 layers together
Open Element 138 and paste - Image - Mirror - Colorise using colours from your tube - Resize by 85 - Sharpen
Position on the right of the archway
Open your tube as a new layer - Position in the centre of the archway - Apply Porcelain at the settings above and then apply Clarity using the above settings

Open Paper 15 and paste as a new layer - I colorised mine again - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Disco Kitty - PTU

I am using the art of PinUpToons which you can find HERE
I am using the PTU Bundle Pack PUT Package 171 by Foxy's Designz which you can find HERE
This is tut 2 of 3 using the pack
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 143, 106, 94, 49

Open a new image 600x600
Open Frame 2 and paste as a new layer
Resize by 50 - Sharpen - Click inside with your magic wand
Selections - Modify - Expand by 5
Open Paper 9 and paste as a new layer
Open a close up of your tube and position on the right
Duplicate and position on the left - Merge these down
Selections - Invert - Delete - Select None and move the paper and tube layers under the frame
Change the blend mode of the tubes to Luminance
Open Element 17 and paste as a new layer - Resize by 70 - Sharpen and send to the bottom of the frame
Open your main tube and paste - Position in the centre of the frame
Open Element 36 - Paste as a new layer - Resize by 80 - Sharpen and position at the top of the frame - Move under the tube
Open Element 14 - Resize by 30 and then by 60 - Sharpen More
Position on the right of the frame - Duplicate and move below leaving a space in between - Merge Down
Duplicate this layer and position on the right of the frame
Open Element 13 - Repeat the above steps in resizing and Sharpening
Position in the centre of the previous brad layers - Duplicate - Image - Mirror and Merge Down
Open Element 20 and paste as a new layer - Resize by 50 -Sharpen - Send to the bottom and move underneath the tubes feet
Open Element 6 and paste as a new layer - Position to the right - Duplicate - Image - Mirror and merge together - Send to the bottom
Apply a slight radiance to your tube at the settings above

Open Paper 4 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Anamorphose FTU Cluster

 

 I have a cluster up using Devilish Dezines Anamorphose PTU Scrapkit which you can find HERE

The link to download is HERE

Gothic Stance - PTU

I am using the art of Enamorte which you can find HERE
I am using the PTU Scrapkit Gothic Couture by Designs by Sarah which you can find HERE
Font of Choice

Filters Used:
Xero - Fritillary - 5, 30, 10, 58
Xero - Radiance - 33, 43, 152, 109

Open a new image 600x600
Open Frame 6 and paste as a new layer - Resize by 70 - Sharpen and position in the centre
Click inside all the frames with your magic wand
Selections - Modify - Expand by 5
Open Paper 1 - Resize by 70 - Sharpen
Open a close up of the tube you are using and position in the right and left frame
When happy - Selections - Invert - Delete - Select None
Move the tube and paper layers under the frame
Change the blend mode of the tubes to Luminance L
Add a drop shadows to your frame layer and merge the layers visible together
Image - Rotate - Free Rotate - 20 Left
Open your main tube and paste as a new layer
Position in the centre of the frames
Open Print 1 - Paste as a new layer and send to the bottom
Image - Rotate - Free Rotate - 20 Right
Open Print 2 - Resize by 80 - Sharpen - Send to above the previous layer
Open Frame 2 and paste as a new layer - Send to above the previous layer and resize by 60 - Sharpen
Click inside with your magic wand
Selections - Modify - Expand by 5 - Layers - New Raster Layer - I used a colour from my tube and floodfilled the layer
Selections - Select None and move under the frame - Apply Fritillary at the settings above to the blue layer
Open Eye - Resize by 30 - Sharpen - Position where the 2 frames meet - Duplicate and position on the bottom where the frames meet
See my tag for the placement ideas
Click on the 3 frame layer - Open bow 1 - Resize by 70 and Sharpen - Position in the centre behind the eye layers
Staying on the 3 frame layer - Open flower 1 - Resize by 60 - Sharpen - Position at the bottom and angle it 20 Right
Apply Radiance to your main tube at the settings above

Apply Drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Bad to the Bone FTU Cluster Frame

 

I have a cluster made using Kelz Bad to the Bone Scrapkit which you can find at the stores listed below on the Rock Chick Tutorial posted below

You can find the cluster HERE

Rock Chick - PTU

 

 I am using the art of Alex Prihodko which you can find HERE
I am using the PTU Scrapkit Bad to the Bone by Kizzed by Kelz which you can find HERE  or HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 94, 73, 155, 82
Eye Candy - Gradient Glow - Fat White - Black

Open a new image 600x600
Open Rolled Wire and paste as a new layer - Position in the centre
Open Stars - Paste as a new layer and position on the left
Duplicate - Image - Mirror and merge down
Open Spike Frame and paste - Resize by 40 - Sharpen - Position on the top left - Duplicate - Image - Mirror and merge down
Click inside both frames with your magic wand
Selections - Modify - Expand by 5
Open Paper 7 and paste as a new layer - Open a close up of your tube and position in the left frame
Duplicate and position in the right frame - When happy - Selections - Invert - Delete on the paper and tube layers
Move under the frame and change the blend mode of the tubes to Screen
Open Cityscape and paste - Resize by 130 - Sharpen and place in the centre
Open Speakers - Resize by 80 - Sharpen and position at the bottom of the previous layer
Open pug 2 and paste - Resize by 60 - Sharpen and position on the right
Open Rock wa and paste - Resize by 60 - Sharpen - Position on the left - Duplicate
Using your deform tool - Angle it so it fits on the right - Merge these together
Apply Gradient Glow to the wordart layers at the settings above
Open your main tube and paste as a new layer - Position in the centre
Apply Radiance at the settings above
Open Pierced Tongue - Image - Mirror - Resize by 50 - Sharpen and position on the bottom left
Open Keyboard - Place in the centre and position to the left - Duplicate - Image - Mirror and merge down - Send to the bottom
Click on the cityscape layer - Open Sparkle 2 and paste as a new layer - Position toward the top - Duplicate and position below - Merge Down
Open Sparkle and paste as a new layer - Position over the 2 frames below the tube - Duplicate and position on the bottom of the tube

Open Paper 3 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Sweet Dreams - PTU

 

 I am using the art of Tin which you can find HERE
I am using the PTU Scrapkit Bundle Tin Package 5 by Ladyhawwk Designs which you can find HERE
This is tut 1 of 3 using this gorgeous pack
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 109, 124, 55, 94

Open a new image 600x600
Open Frame 3 and paste as a new layer
Resize by 90 - Sharpen and position in the centre of your canvas
Click inside both frames with your magic wand
Selections - Modify - Expand by 5
Open Paper 2 and paste as a new layer - Open your tube and paste as a new layer in the right frame
Duplicate and repeat in the left frame
Selections - Invert - Delete - Select None and move the tube and paper layers under the frame
Change the blend mode of the tubes to Luminance
Open your main tube and paste as a new layer - Position in the centre
Open Element 39 and paste as a new layer - Resize by 40 - Sharpen More and position at the bottom of the tube
Open Wordart 3 and paste as a new layer - Resize by 60 - Sharpen and position over the previous layer
Open Element 19 and paste as a new layer - Resize by 80 - Sharpen
Send to the bottom of the canvas
Open Element 23 and paste as a new layer - Resize by 80 - Sharpen and position to the left
Duplicate - Image - Mirror and merge Down - Send to the bottom of the layers
Open Element 17 and paste as a new layer - Resize by 80 twice - Sharpen
Position at the top - Duplicate - Image - Flip and merge down - Send to the bottom
Click on the frame layer - Open Element 6 and paste as a new layer - Resize by 40 - Sharpen - Position on the top of the frame
Duplicate twice more and arrange around the frame - Merge Visible
Duplicate - Image - Mirror and merge down
Apply Xero Radiance to your tube at the settings above

Open Paper 7 and paste as a new layer - Apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

My Sweet Rose - PTU

 

 I am using the art of Martin Abel which you can find HERE
I am using the PTU IB Martin Abel 33-2 by Schnegge and you can find this HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Fritillary - 5, 30, 10, 15
Eye Candy - Gradient Glow - Fat - White and Red
Xero - Radiance - 88, 131, 46, 188

Open a new image 600x600
Open Frame 2 and paste as a new layer
Resize by 80 - Sharpen and position in the centre
Open Paper 5 and paste as a new layer - Open your tube and position in the frame
Duplicate and hide for now
Selections - Invert - Delete - Select None and move both the tube and paper under the frame
Unhide the duplicate and erase the overhanging parts of the tube
Click on the paper layer and apply Fritillary at the settings above
Open Element 15 and paste as a new layer - Resize by 90 - Sharpen and send to the bottom
Open Frame 3 and paste as a new layer - Send to the bottom
Click inside with your magic wand - Selections - Modify - Expand by 4
Open Paper 3 and paste as a new layer
Selections - Invert - Delete - Select None and move under the frame
Open Wordart and paste as a new layer - Resize by 80 - Sharpen
Position at the bottom and apply Gradient Glow at the settings above
Open Element 7 - Resize by 50 - Sharpen - Position on the bottom left below the wordart
Open Element 8 and paste as a new layer - Repeat the above steps and position next to the previous layer
Open Element 1 - Resize by 50 - Sharpen and position next to the previous layer
Open Element 12 and paste as a new layer - Resize by 40 - Sharpen and position next to the previous layer
Open Element 13 - Repeat the above steps
Open Element 16 and paste - Resize by 90 - Send to the bottom right
Apply Radiance to both tube layers at the settings above
Apply Gradient Glow at the settings above to the tube layers aswell

Open Paper 1 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers and merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

The red and the black - PTU

I am using the art of Gaetano DiFalco which you can find HERE
I am using the PTU Scrapkit Anamorphose by Devilish Dezines which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 88, 131, 46, 112

Open a new image 600x600
Open Frame 1 and paste as a new layer
Resize by 80 - Sharpen - Position in the centre
Open Element 12 - Paste as a new layer - Resize by 70 - Sharpen and position on the left
Duplicate - Image - Mirror - Flip and merge down when happy
Open Element 1 and paste as a new layer - Resize by 70 - Sharpen - Position on the top right
Duplicate - Image - Mirror - Flip and merge down when happy
Click inside the frame with your magic wand
Selections - Modify - Expand by 6
Open Paper 4 and paste as a new layer
Open your tube and position in the frame
Duplicate and hide for now - Selections - Invert - Delete - Select None on the tube and paper layer
Move under the frames and unhide the duplicated tube - Erase the overhanging parts
Open Element 25 - Resize by 80 - Send to the bottom and position in the centre
Open Element 40 - Resize by 60 - Sharpen - Position at the top
Duplicate - Image - Flip and merge Down - Send to the bottom
Open Element 36 - Resize by 60 - Sharpen and position on the bottom left
Click on the paper layer - Open Element 45 - Resize by 70 and place in the centre
Click on the frame layer - Open Element 48 - Resize by 80 and position on the left
Erase any overhanging bottom parts using your eraser tool
Apply Radiance to your tube layers at the settings above and repeat

Open Paper 1 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

I believe in Fairies - FTU

I am using the art of Al Rio which you can find HERE
 100% of this tube's price goes DIRECTLY to Al's family
I am using the FTU Scrapkit A Fairy's Fantasy by Tarnished Halo Designs which you can find HERE
2 Masks of Choice
Font of Choice

Filters Used:
Xero - Porcelain - Default and set blue to 0
Eye Candy - Gradient - Glow - Fat - White and Purple

Open a new image 600x600
Open Sparkle and paste as a new layer - Position in the centre
Open Swirl 2 and paste - Position over the previous layer in the centre
Open Butterflies - Resize by 85 - Sharpen and position on the left of the canvas
Duplicate this layer - Image - Mirror and hide this for now
Open Clouds 2 and paste as a new layer - Resize by 70 - Sharpen - Position on the top right
Duplicate - Image - Mirror and merge down
Unhide the duplicated butterflies layer
Open Tree and paste as a new layer - Position in the centre
Open Garden Path and paste as a new layer
Resize by 60 - Sharpen - Place at about half way up the trunk of the tree in the centre
Open Grass - Resize by 50 - Sharpen - Position on the right of the path - Duplicate and position on the left - Merge these down
Open Flowers 3 and paste as a new layer - Resize by 50 - Sharpen
Position on the right of the left grass layer - Duplicate - Image - Mirror and merge down
Open your tube and paste as a new layer
Position her in the centre and apply Porcelain at the settings above
Open Wordart and paste as a new layer - Resize by 60 - Sharpen
Position on the bottom right of the tube and apply Gradient Glow at the settings above

Open Paper 7 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Open Paper 2 and paste as a new layer - Send to the bottom and apply the same mask - Merge Group - Resize by 95
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

In the Garden - PTU

 

 I am using the art of Lady Mishka - This was a tube free with purchase at SATC but is no longer available
You can find her other tubes HERE
I am using the PTU Scrapkit Garden Bouquet by PO Concept and you can find that HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 48 and paste as a new layer
Position in the centre and click inside all of the frames with your magic wand
Selections - Modify - Expand by 8
Open Paper 8 and paste as a new layer
Open your tube and position in the frames
When happy with positioning - Merge the tubes together
Selections - Invert - Delete on the tube and paper layers
Move both under the frame and change the blend mode of the tubes to Multiply
Open Element 126 and paste as a new layer
Resize by 50 - Sharpen - Position on the bottom corners of the frame
Merge these down when happy
Open Element 65 and paste as a new layer - Send to the bottom left
Open Element 57 and paste as a new layer - Position to the right and move to the bottom
Open Element 33 and paste as a new layer - Send to the right - Duplicate - Image - Mirror - Merge Down
Send to the bottom
Open Element 19 and paste as a new layer - Send to above the butterfly layers just above the bottom
Open your main tube and paste as a new layer - Resizing if needed and position in the centre
Open Element 72 - Resize by 20 - Sharpen More and position on the fence on the right
Open Element 95 and paste as a new layer - Send to the bottom

Open Paper 11 and paste as a new layer - Move to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Groovy Chick - PTU

I am using the art of PinUpToons which you can find HERE

I am using the PTU Bundle Pack PUT Package 171 by Foxy's Designz which you can find HERE

This is tut 1 of 3 using the pack

Mask of Choice

Font of Choice

Filters Used:

Xero - Radiance - 128, 50, 70, 182

Open a new image 600x600

Open Frame 1 and paste as a new layer

Resize by 75 - Sharpen and position in the centre

Click inside with your magic wand - Selections - Modify - Expand by 5

Open Paper 4 and paste as a new layer

Open a close up tube and paste as a new layer

Position in the left of the frame

Selections - Invert - Delete - Select None and move both the tube and paper under the frame

Change the blend mode of the tube to Burn - Duplicate and merge Down

Click on the paper layer - Effects - Texture Effects - Blinds - 3 Green

Open Element 35 and paste - Resize by 70 - Sharpen

Position on the bottom of the frame - Send to the bottom - Duplicate - Image - Mirror - Flip - Merge Down

Open your main tube and paste as a new layer - Position on the right of the frame and erase any overhanging parts

Open Element 26 - Resize by 50 - Sharpen and position on the right

Open Element 6 - Send to the bottom left - Duplicate - Image - Mirror - Merge Down

Open Element 12 - Resize by 90 and send to the bottom

Open Element 3 - Resize by 50 - Sharpen - Position under the cat 

Apply Radiance to your tube at the settings above

Open Paper 6 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Down

Add drop shadows to your layers - Merge Visible

Add correct copyright and licence information - Merge Down

Save as a png - Add your name - Save again - Done

Hey Nurse - PTU

I am using the art of Diana Gali which you can find HERE

I am using the PTU Scrapkit Allo Maman Bobo by Skyscraps made to match the tube which you can find HERE

Font of Choice

Filters Used:

Xero - Radiance - 128, 50, 70, 106

Eye Candy - Gradient Glow - Fat - White and Red

Open a new image 600x600

Open Element 35 and paste as a new layer

Position to the right above the centre slightly

Open Element 17 and paste as a new layer - Position to the left of the previous layer

Open Element 26 and paste as a new layer - Resize by 60 - Sharpen and position over the previous layer

Open Element 38 - Paste as a new layer and position on the left

Open Element 67 and resize by 80 - Sharpen

Colourise at the settings of your choice

I used Hue 255 and Sat 222

Position at the bottom of your tag

Open Element 64 and paste as a new layer - Resize by 50 - Sharpen and position over the previous layer

Open Element 6 and paste as a new layer - Resize by 60 - Sharpen and position above the previous layer in the centre

Open Element 10 and paste as a new layer - Resize this by 40 - Sharpen and position on the top right of the frame

Open Element 43 - Paste as a new layer - Resize by 60 - Sharpen and Angle to the Right 45 Degrees

Select all the frames with your magic wand - Selections - Modify - Expand by 4

Open Paper 3 and paste as a new layer - Open a close up of your tube and position

When happy - Selections - Invert - Delete - Select None and move both under the frame

Change the blend mode of the tube to Luminance L

Open Element 19 and paste as a new layer - Resize by 30 - Sharpen and position over the bottom frame

Open Element 13 and paste as a new layer - Resize by 60 - Sharpen and position on the bottom left

Open Element 37 and paste as a new layer - Resize by 50 - Sharpen and position in the middle of the x-ray layer

Open Element 14 and paste as a new layer - Resize by 60 - Sharpen and position on the right of the blood layer

Duplicate and position on the other side - Merge Down

Open your tube and paste - Position her on the right of your tag and apply Radiance at the settings above

Open Element 69 and paste - Resize by 40 - Sharpen and position towards the middle of the bottle layer

Open Element 16 - Resize by 60 - Sharpen and positon in between the previous tablet layer

Duplicate and position between the other layer and merge down when happy

Open Element 20 and paste as a new layer - Send to the bottom left and apply Gradient Glow at the settings above

Open Element 7 - Paste as a new layer and positon on the right of the locker layer

Open Element 31 - Resize by 60 - Sharpen - Image - Rotate - Free Rotate - 90 Left and position on the right of the tube

Add drop shadows to your layers - Merge Visible

Add correct copyright and licence information - Merge Down

Save as a png - Add your name - Save again - Done