Siren - PTU

I am using the art of Barbara Jensen which you can find HERE

I am using the PTU Scrapkit Passing Time by Imperfect Angel Scraps which you can find HERE

This is only available for today as she is retiring at midnight on the 31st May so go and get it!

Font of Choice

Open a new Image 600x600

Open Frame 9 - Resize by 80 - Sharpen and place in the centre - Click inside with your  magic wand - Selections - Modify - Expand by 5 - Open Paper 7 and paste as a new layer - Open Element 77 - Resize by 70 - Sharpen and place on the left - duplicate and position to the right - Selections - Invert - Delete - Select none and move under the frame

Open Frame 2 - Resize by 60 - Sharpen and position on the left of the frame - Move underneath - Duplicate and move to the top - Position on the right

Open Element 17 - Resize by 70 - Sharpen and place on the top left

Open Element 43 - Resize by 60 - Sharpen and place on the top left - duplicate - image - mirror and merge down - Open Element 18 - Resize by 80 and repeat the above steps

Open Element 8 - Resize by 60 - Sharpen and place on the bottom left - duplicate twice and position on the right of each other - merge down

Open Element 3 and paste as a new layer - Resize by 80 and place toward the top

Open Element 68 - resize by 45 - Sharpen and as before with the red flowers - repeat the steps but this time duplicate by 3

Open your tube and place her toward the bottom

Add drop shadows to your layers - Merge visible

Add correct copyright and licence information - merge down

Save as a png - Add your name - Save again - Done

Precious - PTU

I am using the art of Dirk Richter which you can find HERE

I am using the PTU IB Dirk Richter8-2 Scrapkit by Ladyhawwk Designs which you can find HERE

Mask of Choice

Font of Choice

Filters Used:

Xero - Radiance - 128, 188, 128, 124

Open a new image 600x600

Open Frame 1 - Resize by 60 - Sharpen and place in the centre - Open Element 6 and position on the top centre of the frame - Open Element 13 - Resize by 70 - Sharpen and place along the bottom of the frame - Open Element 8 - Resize by 80 - Sharpen and place on the previous layer

Open Element 28 - Resize by 60 - Sharpen and place on the right of the canvas - Duplicate - Image - mirror and merge down - Open Element 1- Resize by 60 - Sharpen and place in the centre - Click inside all the frames with your magic wand - Selections - modify - Expand by 5 and open paper 1 and paste as a new layer - Selections - Invert - Delete - Select none and move under the frame - Open Element 18 and paste as a new layer - Resize by 70 - Sharpen and position toward the top - Open Element 27 - Resize by 50 - Sharpen and place on the top right - Duplicate - Image - Mirror and merge down

Open Element 14 - Resize by 70 - Sharpen and place on the right - Open Element 9 - Repeat the above steps and place in the centre of the previous layer

Open Element 4 - Resize by 60 - Sharpen and place toward the bottom centre - Open Element 7 - Resize by 80 - Sharpen and place on the top right of the window frame - Duplicate - Image - Mirror and merge down - Open Element 23 - Resize by 35 - Sharpen and position on the right centre - Open Element 25 and position on the bottom right

Open Element 16 - Resize by 50 - Sharpen and place on the bottom left - Duplicate - Image - Mirror - Merge Down - Open Element 3- Resize by 40 - Sharpen and place on the bottom left

Open Element 5 - Resize by 60 - Sharpen and place on the right centre - Duplicate - Image - Mirror and place on the top left - Open Element 19 - Resize by 65 - Sharpen and place on the top right - Duplicate - Image - Mirror and position on the bottom left - merge down

Open your tube and position her to the left of the tag - Apply Radiance at the settings above

Open Element 2 - Resize by 35 - Sharpen and place on the bottom right of the tube

Open Paper 2 Paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible

Add correct copyright and licence information - merge down

Save as a png - Add your name - Save again - Done

Show Off Tag for Ginnibug Designs

New show off tag from myself using the tube Andrea by Trinita and the PTU Scrapkit Elegance by Ginnibug Designz

Show off Tag for Abstract!

New Show Off Tag using the gorgeous tube Angie by Verymany and Abstract Creations Beauty Within PTU Scrapkit

New kit from PBDesigns!

Brand New Scrapkit by PBDesigns called Cinco De Mayo, this kit is now on Sale!! 45% Off until Tuesday 3rd June!!

http://www.scrappybee.com/beehive/index.php?main_page=product_info&cPath=1_90&products_id=677#.U4hSmPldXfI

You can buy the bundle - which consists of the brand new kit Cinco De Mayo, the Birthday Add On and the Funbits Add On - this will be $6.25 for as long as the bundle is available! If you bought all the above seperately it would cost $11.25 so you are saving yourself a lot of dollars if you buy the bundle!! - 

http://www.scrappybee.com/beehive/index.php?main_page=product_info&cPath=1_90&products_id=679&zenid=2c100d3ab31e08d8e64780f19d6181a9#.U4hSCPldXfI

Bashful - PTU

I am using the art of Barbara Jensen which you can find HERE

I am using the PTU Scrapkit Ladies Day by Devilish Dezines which you can find HERE

Font of Choice

Open a new image 600x600

Open Element 22 - Resize by 70 - Sharpen and place to the left - Duplicate - Image - Mirror and Merge Down - Open Element 17 - Resize by 80 - Sharpen and place in the centre - Duplicate and position below the original - merge down

Open Element 3 - Resize by 60 - Sharpen and place in the centre - Open Element 34 and paste as a new layer - Resize by 60 - Sharpen and place to the top of the previous layer

Open Element 25 - Resize by 85 - Sharpen and place on the left - Duplicate - Image - Mirror and merge down - Open Element 10 - Resize by 80 - Sharpen and place on the bottom

Open your tube and place her in the centre

Open Element 33 - Resize by 70 - Sharpen and place on the bottom of the tube

Open Element 12 - Resize by 70 - Sharpen and place on the bottom left - Duplicate - Image - Mirror and merge down - Open Element 47 - Flip and resize by 50 - Sharpen and place to the right - Duplicate and mirror - merge down

Open Element 23 - Resize by 35 - Sharpen and place on the right of the far left grass - duplicate - Image - Mirror and merge down

Add drop shadows to your layers - Merge visible

Add correct copyright and licence information - merge down

Save as a png - Add your name - Save again - Done

Evil - PTU

I am using the art of Spazz which you can find HERE

I am using the PTU Matching Scrapkit Cursed by Drama Bomb Design Designs which you can find HERE

Mask of Choice

Font of Choice

Filters Used:

Eye Candy - Gradient Glow - Fat - White and Black

Open a new image 600x600

Open Element 94 and paste as a new layer - Resize by 80 - Sharpan and place in the centre

Open Element 92 - Mirror and resize by 70 - Place on the top right

Open Element 31 - Resize by 70 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open paper 17 and paste as a new layer - Open Element 86 - Resize by 50 - Sharpen and place on the top right - Open Element 82 and paste as a new layer - Resize by 60 - Sharpen and place in the centre - Selections - Invert - Delete - Select none and move under the frame - Apply Gradient Glow at the settings above to the frame - Open Element 66 - Resize by 60 - Sharpen and place on the far left - Duplicate and position on the bottom right - merge down

Open Element 24 - Resize by 70 - Sharpen and place on the far left - Open Element 59 - Resize by 80 - Sharpen and place over the previous layer

Open Element 29 - mirror - Resize by 40 - Sharpen and place on the bottom left

Open Element 18 - Resize by 80 and place on the bottom - Open Element 71 - Resize by 70 - Sharpen and place in the centre of the path

Open Element 19 - Resize by 45 - Sharpen and place on the bottom right - Duplicate - Mirror and place on the left of the original - merge down

Open element 64 - Resize by 60 - Sharpen and place on the bottom right

Open Element 33 - Resize by 60 - Sharpen and place on the bottom right

Open Element 51 - Resize by 70 - Sharpen and place on the top centre of the frame

Open Element 32 - mirror - resize by 90 - sharpen and place on the top

Open your tube and position her to the left

Open Paper 4 - Paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible

Add correct copyright and licence information - merge down

Save as a png - Add your name - Save again - Done

Special - PTU

I am using the art of Amy Matthews which you can find HERE

I am using the PTU IB Amy Matthews 40-1 Scrapkit by Foxys Designz which you can find HERE

Mask of Choice

Font of Choice

Filters Used:

Eye Candy - Gradient Glow - Fat - White and Blue

Xero - Radiance - 79, 161, 143, 124

Open a new image 600x600

Open Element 8 and paste as a new layer - Resize by 80 - Sharpen and place in the centre

Open Frame 2 - Image - Rotate - Free Rotate - 90 Left - Resize by 70 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - open Paper 4 - resize by 60 and place in the centre - Open your tube and position - Duplicate and hide for now - Selections - Invert - Delete - Select none and move both under the frame

Open Element 2 - Resize by 70 - Sharpen and place on the top right of the frame

Open Element 15 - Image - Flip - Position on the top of the frame

Open Element 12 - Resize by 50 - Sharpen and place on the top right of the frame - Duplicate - Image - Mirror and merge down - Open Element 10 and paste as a new layer on the bottom of the frame - Open Element 19 - Resize by 70 - Sharpen and place on the left of the frame - Duplicate - Image - Mirror - Merge down

Open Element 13 - Resize by 60 - Sharpen and place on the bottom left

Open Element 4 - Resize by 45 - Sharpen and place on the bottom left - Duplicate - Resize by 70 - Sharpen and place on the bottom centre of the frame - Duplicate and merge down

Open Element 14 - Resize by 60 - Sharpen and place on the bottom right - open element 9 - Resize by 70 - Sharpen and place on the envelope - Open Element 1 - resize by 50 - Sharpen and place on the bottom right - Duplicate and as before resize and place on the right of the centre flower - Open Element 17 - Resize by 70 - Sharpen and place on the bottom

Open Wordart 1 - Resize by 70 - Sharpen and place on the bottom - Apply Gradient glow at the settings above - Unhide your duplicated tube and place to the top - Erase the bottom of the tube - Apply radiance to the tube layers at the settings above

Open Paper 5 - Paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible

Add correct copyright and licence information - merge down

Save as a png - Add your name - Save again - Done

Sea Woman - PTU

I am using the art of Trinita which you can find HERE

I am using the PTU Scrapkit Mermaid Treasures by Jackie's Jewel's which you can find HERE

Mask of Choice

Font of Choice

Filters Used:

Xero - Fritillary - Default

Eye Candy - Gradient Glow - Default and Purple as the colour

Open a new image 600x600

Open Frame 4 and paste as a new layer - Place in the centre and resize by 80 - Sharpen - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 9 and paste as a new layer - Selections - Invert - Delete - Select none and move under the frame

Open Frame 3 - Resize by 90 and place in the centre - Click inside both frames with your magic wand - Selections - Modify - Expand by 5 - Open Paper 1 and paste as a new layer - Open your close up tube and position in the left frame - When happy - Selections - Invert - Delete - Select none and move both under the frame - Apply Fritillary at the settings above to the paper

Open Coral 1 and place on the far left of the frame - Duplicate and place in the middle - Duplicate again and position on the far right - merge all 3 together

Open Bubbles 1 and paste as a new layer - Resize by 70 - Sharpen and place in the centre

Open Sea Animal and place in the centre of the right frame - Apply Gradient Glow at the settings above - Open Wave and place on the bottom right - Open Mesh and place along the bottom - Open Flowers and place on the bottom left - Duplicate and position next to the original - Open Rock - Resize by 80 - Sharpen and place on the bottom right

Open Dolphin and place on the top right

Open your tube and place her on the rock - Open Urchins - Resize by 80 - Sharpen and place on the bottom right - Open Sea Snail Shell 1 - Resize by 60 - Place on the left of the previous layer

Open Paper 6 - Image - Flip - Paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible

Add correct copyright and licence information - merge down

Save as a png - Add your name - Save again - Done

Eternal Love - PTU

I am using the art of Enamorte which you can find HERE

I am using the PTU IB Enamorte 22-3 by Rebel Dezigns which you can find HERE

Mask of Choice

Font of Choice

Filters Used:

Eye Candy - Gradient Glow - Fat - White and Black

Open a new image 600x600

Open Frame 1 and paste as a new layer - Resize by 80 and Sharpen - Position toward the top - Duplicate - Image - Flip and Merge down

Open Frame 2 - Resize by 60 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 5 and paste as a new layer - Selections - Invert - Delete - Select none and move under the frame

Open Element 17 and place along the bottom of the tag

Open Element 11 - Resize by 65 - Sharpen and place on the top left of the frame - Duplicate - Image - Mirror and merge down when happy

Open Element 2 - Resize by 60 - Sharpen and position on the far right of the tag

Open Element 12 and paste as a new layer on the bottom of the canvas

Open Element 9 - Resize by 85 - Sharpen and place just below centre

Open Element 8 and place on the far right of the tag - Duplicate - Image - Mirror - Merge down

Open Element 7 - Resize by 65 - Sharpen and place on the bottom right

Open your tube and position in the centre - I colorised mine - Hue and Sat 0 to match the kit

Open Element 5 - Resize by 70 - Sharpen and place on the bottom of the tube

Open wa - Resize by 70 - Sharpen and place on the bottom - Apply Gradient Glow at the settings above

Open Paper 3 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible

Add correct copyright and licence information - merge down

Save as a png - Add your name - Save again - Done

2 More Show Off Tags!

2 More tags using the 2nd Cluster in the pack - 1st i used the art of Dirk Richter and in the 2nd, the artwork of Anna Marine - You can find the cluster pack HERE

Show off Tags using Hungry Hill's Cluster Pack 4

 

Above are 2 tags i have used using Alison's Cluster Pack 4 - This is the 1st cluster in the pack, i have used the art of Anna Liwanag in the first cluster and left it how it was and in the 2nd, i have used the art of Enys Guerrero and colorised and moved various elements around

You can find the Pack HERE

Silent Chaos - PTU

I am using the art of Mayumi Ogihara which you can find HERE

I am using the PTU Scrapkit Through the Chaos by WDDesignz which you can find HERE

Mask of Choice

Font of Choice

Filters Used:

Xero - Radiance - 128, 67, 131, 121

Open a new image 600x600

Open Element 28 and paste as a new layer - Resize by 60 - Sharpen and position on the right centre - Duplicate - Image - Mirror and merge down

Open Element 66 - Resize as before and repeat the above steps

Open Frame 5 and paste as a new layer - Resize by 60 - Sharpen and place in the centre - Click inside with your magic wand - Selections - modify - expand by 5 - Open your tube and place in the frame - Selections - Invert - Delete - Select none and move under the frame - Apply Radiance at the settings above - Open Element 53 - Resize by 60 - Sharpen and place on the top of the frame - Open Element 13 - Rotate by 45 Left - Resize by 60 - Sharpen and place on the bottom left - Duplicate - Image - Flip - Mirror and merge down

Open Frame 6 - Resize by 55 - Sharpen and place in the centre

Open Element 12 - Rotate by 45 Right and resize by 70 - Sharpen and place on the top

Open Element 41 and paste as a new layer - Resize by 55 - Sharpen and place on the top left - Duplicate - Image - Mirror and merge down

Open Element 27 - Resize by 45 - Sharpen and place on the top right - duplicate - image - mirror and merge down - Open Element 26 - Repeat the above steps

Open Element 30 - Resize by 50 - Sharpen and place on the bottom right - Duplicate - Image - Mirror and merge down - Open Element 68 and paste as a new layer - Resize by 80 - Sharpen and place on the top of the frame

Open Element 9 and place on the bottom of the frame - Open Element 5 - resize by 70 - Sharpen - Place on the right - Duplicate - image - mirror and merge down

Open Element 37 - Resize by 45 - Sharpen and repeat the above steps

Open Element 23 and paste as a new layer - Resize by 50 - Sharpen and place on the bottom right - Open Element 36 - resize by 35 - Sharpen and place on the bottom left - duplicate - image - mirror and merge down

Open Paper 11 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible

Add correct copyright and licence information - merge down

Save as a png - Add your name - Save again - Done

Sweet Lingerie - PTU

I am using the art of Jennifer Janesko which you can find HERE

I am using the PTU IB Jennifer Janesko 33-1 Scrapkit by WDDesignz which you can find HERE

Mask of Choice

Font of Choice

Open a new image 600x600

Open Element 21 and paste as a new layer positioning in the centre

Open Element 12 - Resize by 80 and place in the centre

Open Element 4 - Resize by 70 and place in the centre - Click inside the far windows and the centre of the frame - Selections - Modify - Expand by 5 - Open Paper 2 and paste as a new layer - Selections - Invert - Delete - Select none and move under the frame

Open Element 13 - Resize by 60 and place on the far right - Duplicate - Image - Mirror - merge down - Open Element 6 - Resize by 55 - Sharpen and place on the top centre

Open Element 27 and position on the top right of the window frame - Duplicate - Mirror and merge down - Erase the parts that stick out from the bottom

Open Element 40 and paste as a new layer positioning in the centre

Open Element 46 - Resize by 50 - Sharpen and place in the centre - open element 45 and repeat the above steps - Open Element 39 and paste as a new layer - Resize by 75 - Sharpen and place on the top left - Duplicate - Mirror and Merge Down

Open Element 44 - Resize by 60 - Sharpen and place on the right - Duplicate - Mirror - merge down - Open Element 34 - Resize by 70 - Sharpen and position toward the top

Open Element 29 - Resize by 80 - Sharpen and place towards the top of the frames

Open Element 42 - Resize by 60 - Sharpen and place in the middle

Open your tube and place her in the middle of the frames - Open Element 3 - Flip - Rotate by 90 Left and place on the bottom of the tube - Resize by 50 - Sharpen and erase the bottom part of the tube thats underneath the ribbon

Open Element 20 - Mirror - Resize by 60 - Sharpen and place on the bottom left

Open Element 22 - Flip - Resize by 45 - SHarpen and place on the bottom right - Duplicate - Resize by 80 - Sharpen and position on the left of the previous layer - merge down

Open ELement 38 - Position on the bottom left - Erase everything thats underneath the hole in the key - Open Element 1 - Resize by 70 - Sharpen and position toward the bottom

Open Paper 5 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible

Add correct copyright and licence information - merge down

Save as a png - Add your name - Save again - Done

Enchanting - PTU

I am using the art of Enamorte which you can find HERE

I am using the PTU IB Enamorte 24-1 by Foxy's Designz which you can find HERE

Mask of Choice

Font of Choice

Filters Used:

Xero - Radiance - 158, 225, 194, 118

Xero - Clarity - Default

Eye Candy - Gradient Glow - Fat - White and Light Purple

Open a new image 600x600

Open Frame 1 and paste as a new layer - Resize by 70 and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 5 and paste as a new layer - Open Element 17 - Rotate - 90 Right and paste as a new layer - Selections - Invert - Delete - Select none and move all under the frame

Open Element 11 and paste as a new layer on the bottom of the frame - Duplicate - Image - Flip and merge down - Open Element 2 - mirror - Resize by 50 - Sharpen and place on the top right - Open Element 16 - Resize by 45 - Sharpen and place on the top left

Open Element 3 and position on the bottom left of the frame

Open Element 12 - Position on the top left - Duplicate and mirror and place on the bottom right - merge down - Open Element 10 - Image - Flip and position on the top

Open Element 14 and paste as a new layer - Open Element 20 - Place toward the bottom - Duplicate - Flip and position toward the top - merge down

Open your tube and place her in the centre - Apply Radiance and then Clarity at the settings above - Open Element 5 - Resize by 35 - Sharpen and place on the bottom right - Duplicate - Image - Mirror and merge down - Open Element 8 and place on the bottom left

Open Element 19 and paste as a new layer - Resize by 70 - Sharpen and place on the bottom right - Open Wordart 1 and paste as a new layer - Resize by 85 - Sharpen and position along the bottom - Apply Gradient Glow at the settings above

Open Paper 2 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible

Add correct copyright and licence information - merge down

Save as a png - Add your name - Save again - Done

Nothing's Impossible - PTU

I am using the art of PinUpToons which you can find HERE

I am using the PTU IB PinUpToons 180-1 Scrapkit by WDDesignz which you can find HERE

Mask of Choice

Font of Choice

Filters Used:

Xero - Radiance - 128, 97, 128, 109

Eye Candy - Gradient Glow - Fat - White and Red

Open a new image 600x600

Open Element 5 and paste as a new layer - Rotate by 90 - left and place in the centre

Open Element 6 - Resize by 80 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 2 and paste as a new layer - Selections - Invert - Delete - Select none and move under the frame

Open Element 26 - Image - Flip - Resize by 70 - Sharpen and place on the bottom

Open Element 18 - Resize by 60 - Sharpen and place in the centre

Open Element 7 - Resize by 70 - Sharpen and place towards the bottom right

Open Element 25 - Resize by 40 - Sharpen and place to the bottom left - Erase any that sticks out from the frame - Duplicate and repeat on the right side - Merge down

Open Element 13 - Resize by 35 - Sharpen and position on the top right - Duplicate and move to the left so they are matching - merge down - Duplicate twice and position in the centre and to the bottom - merge all 3 together

Open Element 10 - Resize by 35 - Sharpen and place on the top right - Duplicate - mirror - resize by 80 and position on the top left

Open your tube and position in the centre - Apply Radiance at the settings above

Open Element 23 - Resize by 85 - Sharpen and place along the bottom - Erase the bottom of the tube that sticks out from underneath the ribbon

Open Element 12 - Resize by 80 - Sharpen and place along the bottom - Apply Gradient Glow at the settings above

Open Paper 4 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible

Add correct copyright and licence information - merge down

Save as a png - Add your name - Save again - Done

Lavender Beauty - PTU

I am using the art of Verymany which you can find HERE

I am using the PTU Scrapkit Lovely Lavender by PinkParadox Productions which you can find HERE

Font of Choice

Filters Used: 

Xero - Fritillary - Default

Open a new image 600x600

Open Element 97 - Resize by 80 - Sharpen and place along the bottom

Open Element 146 - Resize by 75 - Sharpen and place in the centre

Open Frame 5 - Resize by 70 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 4 and paste as a new layer - Open Element 95 - Resize by 60 - Sharpen and place toward the bottom of the frame - Selections - Invert - Delete - Select none and move under the frame - Apply Fritillary to the paper layer at the settings above - Keeping on the paper layer - Open Element 120 - Resize by 55 and place in the centre - Open Frame 6 - Resize by 45 - Sharpen and place in the centre

Open Element 74 - Resize by 60 - Sharpen and place along the top of the frame

Open Element 111 - Mirror - Resize by 50 - Sharpen and place on the right

Open Element 52 - Resize by 40 - Sharpen and place on the bottom right

Open Element 77 - Resize by 70 - Sharpen and place on the top left of the frame

Open Element 5- Resize by 15 - Sharpen More and place on the top left of the previous layer

Open Element 75 and paste as a new layer - Resize by 35 - Sharpen and place on the bottom right - Open your tube and place her in the centre of the tag

Open Element 94 - Resize by 50 - Sharpen and place on the bottom left - Duplicate and place on the bottom of the tube - Open Element 39 - Mirror - Resize by 80 - Sharpen and place on the bottom right - Open Element 144 - Resize by 70 and place along the bottom

Open Element 109 - Resize by 30 - Sharpen and place on the bottom left - Duplicate and place on the left of the original - merge down - Duplicate - Rotate - 90 Left and position on the left bottom of the frame - merge these 2 together

Open Element 8 - Resize by 15 - Sharpen more and position on the top left

Add drop shadows to your layers - Merge visible

Add correct copyright and licence information - merge down

Save as a png - Add your name - Save again - Done

Goth Griffith - PTU

I am using the art of Jasmine Beckett-Griffith which you can find HERE

This is a retired bonus tube

I am using the PTU IB Jasmine Beckett-Griffith 1-3 Scrapkit by Foxy's Designz which you can find HERE

Mask of Choice

Font of Choice

Filters Used:

Xero - Radiance - 152, 97, 128, 149

Open a new image 600x600

Open Element 4 and paste as a new layer - Place in the centre

Open Frame 2 - Paste as a new layer - Resize by 80 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expan by 5 - Open Paper 3 and paste as a new layer - Selections - Invert - Delete - Select none and move under the frame

Open Element 16 and paste as a new layer on the top half of the frame

Open Element 6 - Resize by 35 - Sharpen and place on the top right of the frame - Duplicate - Image - Mirror and merge down

Open Frame 1 - Rotate by 90 Left - Place in the centre - Click inside as before and paste paper 6 into the frame - Selections - Invert - Delete - Select none

Open Wordart 1 - Resize by 70 - Sharpen and place on the top of the frame

Open Element 15 and paste as a new layer on the top right - Delete any that stick out the  bottom of the tag - Open Element 2 - Resize by 60 - Sharpen and place on the right - Duplicate - Image - Mirror and merge down - Open Element 11 - Resize by 60 - Sharpen and place on the far bottom right - Duplicate and place on the far left - merge down

Open Element 13 and place along the top of the graves

Open Element 9 - Resize by 50 - Sharpen and place along the bottom - Open Element 17 - Image - Flip and position on the bottom of the previous layer

Open Element 14 - Resize by 70 - Sharpen and place on the bottom of the tag

Open Element 18 - Resize by 40 - Sharpen and place on the far bottom left of the tag - Duplicate and Mirror - Duplicate again and resize by 80 - Position on the right of the first flower - Duplicate twice more and place next to each other and merge all down when happy

Open Element 19 - Resize by 25 - Sharpen and place on the bottom left - Duplicate - Mirror

Open Element 12 - Resize by 70 - Sharpen and place on the right - Duplicate - Image - Mirror

Open your tube and place in the centre - Apply Radiance at the settings above

Open Element 8 and paste as a new layer on the bottom right - Open Element 10 - Mirror - Resize by 45 - Sharpen and place on the bottom right

Open Paper 1 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible

Add correct copyright and licence information - merge down

Save as a png - Add your name - Save again - Done

Emo Blue - PTU

I am using the art of Ed Mironiuk which you can find HERE

I am using the PTU IB Ed Mironiuk 92-2 by BabyCakes Scraps which you can find HERE

Mask of Choice

Font of Choice

Open a new image 600x600

Open Element 25 - Resize by 80 - Sharpen and place to the right

Open Element 26 - Resize by 60 - Sharpen and place to the right - Click inside with your magic wand - Selections - modify - expand by 5 and open Paper 4 - Paste as a new layer - Open your close up tube and position in the frame - Selections - Invert - Delete - Select none and move both under the frame - Change the blend mode of the tube to Hard Light

Open Element 13 - Resize by 70 - Sharpen and place on the top right of the frame - Duplicate - Image - Mirror and merge down

Open Element 5 and paste as a new layer - Position on the top left

Open Element 27 - Image - Mirror - Resize by 60 - Sharpen and place in the top centre

Open Element 17 - Resize by 75 - Sharpen and place on the top centre of the frame

Open Element 21 - Paste as a new layer and position on the bottom right

Open Element 8 - Resize by 65 - Sharpen and place on the left of the previous layer

Open Element 9 - Resize by 30 - Sharpen and place on the left of the previous layer

Open Element 20 - Mirror - Resize by 70 - Sharpen and place on the bottom right

Open Element 18 - Paste as a new layer and place on the bottom left

Open your tube and position her along the bottom of the tag

Open Paper 3 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible

Add correct copyright and licence information - merge down

Save as a png - Add your name - Save again - Done

Steam - PTU

I am using the art of Spazz which you can find HERE

I am using the PTU Scrapkit Steamy Elegance by Kissed by Kelz which you can find HERE

Mask of Choice

Font of Choice

Filters Used:

Xero - Radiance - 216, 85, 128, 109

Open a new image 600x600

Open Element 114 - Resize by 80 - Sharpen and place on the bottom right - Duplicate - Image - Mirror and merge down

Open Element 116 - Resize by 70 - Sharpen and place on the top right - Duplicate - Image - Mirror and place on the far left - merge down

Open Element 53 - Resize by 70 - Sharpen and place on the bottom right

Open Element 70 - Resize by 60 - Sharpen and place in the centre - Click inside with the magic wand - Selections - Modify - Expand by 5 - Open Paper 7 and paste as a new layer - Open your close up tube and position in the right of the frame - Open Element 2 and place around her face - Selections - Invert - Delete - Select none and move all under the frame - Change the blend mode of the tube to Soft light and Duplicate - Change the blend mode of the silver frame to Luminance - Open Element 98 and place in the centre

Open Element 78 - Resize by 70 - Sharpen and place along the bottom

Open Element 76 - Resize by 50 - Sharpen and place on the right of the frame - Duplicate - Image - Mirror and merge down - Open Element 66 - Mirror and resize by 60 - Sharpen and place on the top right - Open Element 58 - Mirror and resize by 50 - Sharpen and place in the centre - Open Element 43 - Resize by 45 - Sharpen and place on the bottom right - Duplicate - resize by 80 - Sharpen and place on the bottom left of the original - Repeat the above steps and merge all 3 flowers together - Open Element 33 - Resize by 35 - Sharpen and place on the far centre right of the frame - Duplicate and position below the original

Open Element 106 - Resize by 60 - Sharpen and place on the top right

Open Element 102 - Resize by 45 - Sharpen and place on the top left

Open Element 28 - Resize by 50 - Sharpen and place on the bottom left - Open your tube and position her to the left - Apply Radiance at the settings above

Open Paper 29 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible

Add correct copyright and licence information - merge down

Save as a png - Add your name - Save again - Done

The Companion - PTU

I am using the art of Regan Kubecek which you can find HERE

I am using the PTU Scrapkit Esmerelda by BlackWidow Creationz which you can find HERE

Mask of Choice

Font of Choice

Filters Used:

Xero - Radiance - 128, 50, 128, 106

Eye Candy - Gradient Glow - Fat - White and Purple

Open a new image 600x600

Open Element 4 and paste as a new layer - Position along the bottom centre

Open Element 5 - Resize by 80 and paste as a new layer on the top - Duplicate - Image - Mirror and move to the bottom - merge down

Open Element 14 - Resize by 80 and place in the centre - Click inside with your magic wand - Selections - modify - expand by 5 and open paper 3 and paste as a new layer - Open your tube and position - when happy - duplicate and hide for now - Selections - Invert - Delete - Select none and move all under the frame

Open Element 23 - Paste as a new layer along the top of the frame

Open Element 11 - Resize by 85 and place in the centre - Open Element 20 and paste on the right of the frame - duplicate and move next to the original - merge down

Open Element 36 - Mirror and paste as a new layer on the top right - duplicate - image - flip - mirror and merge down

Open Element 38 - Mirror and resize by 60 - Sharpen and place on the far right

Open Element 32 and paste as a new layer to the top of the tag

Open Element 30 and paste as a new layer on the top left - Unhide your duplicated tube and move to the top erasing any parts that stick out from the other layers - Apply Radiance at the settings above to both tube layers

Open Element 34 and resize by 50 - Sharpen and place along the bottom of the goth frame

Open Element 28 - Resize by 70 - Sharpen and place on the bottom left - duplicate - image - mirror and merge down - Open Element 18 - Resize by 75 - Sharpen and place on the bottom - Apply Gradient Glow at the settings above

Open Paper 2 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible

Add correct copyright and licence information - merge down

Save as a png - Add your name - Save again - Done

Light Summer - PTU

I am using the art of Anna Liwanag which you can find HERE

I am using the PTU Scrapkit Come Summer Morning by Horseplays Pasture Designs which you can find HERE

Mask of Choice

Font of Choice

Filters Used:

Xero - Radiance - 52, 103, 128, 82

Open a new image 600x600

Open Element 22 and paste as a new layer - Resize by 80 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 7 and paste as a new layer - Open your tube and position in the centre - Duplicate and hide for now - Selections - Invert - Delete and select none - Move under the frame

Open Element 11 and paste as a new layer - Position in the centre

Open Element 1 and paste as a new layer - position on the top left - duplicate - image - mirror - duplicate - image - flip and mirror and merge all 3 layers together

Open Element 49 - Resize by 80 and position along the top of the tag

Open Element 9 - Mirror - Resize by 80 and place on the bottom left

Open Element 34 - Image - flip and position on the bottom of the tag

Open Element2 - Mirror - Resize by 35 - Sharpen and place on the bottom right

Open Element 27 - Resize by 70 - Sharpen and place on the right of the frame - duplicate - image - mirror and merge down

Unhide your duplicated tube and move to the top - erase some that are overhanging 

Apply Radiance to both tube layers at the settings above

Open Paper 10 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible

Add correct copyright and licence information - merge down

Save as a png - Add your name - Save again - Done

Steampunk Wonderland - PTU

I am using the art of Martin Abel which you can find HERE

I am using the PTU Scrapkit Steampunk Wonderland by PinkParadox Productions which you can find HERE

Mask of Choice

Font of Choice

Open a new image 600x600

Open Element 118 and paste as a new layer - Resize by 45 - Sharpen and position on the bottom slightly to the right - Open Element 101 and paste as a new layer - Resize by 70 and place along the bottom - I colorised mine to match my tube

Open Element 129 - Image - Flip - Resize by 40 - Sharpen and place on the top right

Open Element 107 and paste as a new layer - Resize by 50 - Sharpen and place on the bottom right - Open Element 140 - Resize by 60 - Sharpen and place on the left

Open Element 88 and resize by 35 - Sharpen and position on the bottom left

Open Element 123 and paste as a new layer - Resize by 40 - Sharpen and place on the bottom left of the house - Open Element 91 - Resize by 80 - Mirror and place on the top left of the house - Open Element 11 - Resize by 70 and place on the bottom left

Open Element 110 - Resize by 55 - Sharpen and place on the top right

Open Element 119 - Mirror - Resize by 50 - Sharpen and place on the bottom right

Open your tube and paste as a new layer - Place on the left

Open Element 87 - Resize by 35 - Sharpen and position on the bottom right

Open Paper 9 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible

Add correct copyright and licence information - merge down

Save as a png - Add your name - Save again - Done

Serene - PTU

I am using the art of Zindy Nielson - This tube is a FTU and you can find her shop HERE

I am using the PTU Scrapkit Fairy Frolic by MellieBeans which you can find HERE

Font of Choice

Open a new image 600x600

Open Frame 2 and paste as a new layer - Resize by 90 and place toward the bottom

Open Frame 3 - Resize by 70 and postion towards the top of the previous frame - Click inside with your magic wand - Selections - modify - expand by 6 - Open paper 3 and paste as a new layer - Selections - invert - delete - select none and move under the frame

Open Element 1 and paste as a new layer - resize by 70 - sharpen and place on the top right - duplicate - position below the original - merge down - duplicate - image - mirror and merge down - Open Frame 1 and paste as a new layer - resize by 80 - sharpen and place in the centre - click inside with your magic wand - selections - modify - expand by 5 - open paper 5 and paste as a new layer - open your tube and position in the centre - selections - invert - delete - select none and move under the frame - Open element 21 - Resize by 60 - Sharpen and position below the paper - Open Element 17 and resize by 50 - Sharpen and place on the far right - duplicate - image - mirror and merge down

Open Element 13 - Resize by 60 - Sharpen and place on the right - Open Element 15 - Resize by 50 - Sharpen and position to the left

Open Element 9 - Resize by 45 - Sharpen and place on the bottom right - duplicate and position above the original - merge down - duplicate - mirror and merge down

Open Element 18 - Resize by 55 - Sharpen and place on the bottom right - duplicate - image - mirror - merge down - Open Element 22 and paste as a new layer - resize by 60 - Sharpen and place on the right of the frame - duplicate and move below the original - merge down - duplicate - image - mirror and merge down

Open Element 7 - Resize by 60 - Sharpen and place along the bottom - Open Element 8 and paste as a new layer - Resize  by 40 - Sharpen and place on the far right - duplicate - resize by 80 - sharpen and place on the left of the previous layer - merge down and as before - duplicate - image - mirror and merge down

Open wa2 and paste as a new layer - Resize by 60 - Sharpen and place along the bottom - apply gradient glow at the settings above - Open Element 12 and resize by 45 - Sharpen and place her on the mushrooms so it looks as if she is sitting on them in the tubes eye view

Add drop shadows to your layers - Merge visible

Add correct copyright and licence information - merge down

Save as a png - Add your name - Save again - Done

Owl Lady - PTU

I am using the art of Alfadesire which you can find HERE

I am using the PTU Scrapkit Hoot Hoot by PO Concept which you can find HERE

Mask of Choice

Font of Choice

Filters Used:

Eye Candy - Gradient Glow - Fat - White and Dark Blue

Open a new image 600x600

Open Element 78 and place in the centre of your tag

Open Element 59 - Resize by 80 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 4 - Open Paper 7 and paste as a new layer - Open Element 100 and paste as a new layer - Resize by 80 and position on the right of the frame - Open Element 58 and place toward the top - Selections - Invert - Delete - Select none and move all underneath the frame

Open Element 47 and paste as a new layer - Resize by 70 - Sharpen and place on the top left - Duplicate - Image - mirror and merge down

Open Element 7 and paste as a new layer on the left of the tag

Open Element 99 - Resize by 60 - Sharpen and place along the bottom

Open Element 25 - Resize by 70 - Sharpen and place on the bottom of the frame

Open your tube and position her in the centre

Open Element 106 - Resize by 80 - Sharpen and place on the bottom of the tube

Open Element 51 and paste as a new layer - Place on the bottom

Open Element 33 - Resize by 60 - Sharpen and place over the previous layer

Open Element 3 - Resize by 80 - Sharpen and place on the bottom - Apply Gradient Glow at the settings above

Open Paper 14 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible

Add correct copyright and licence information - merge down

Save as a png - Add your name - Save again - Done