Tags using Chichi Designz Cluster Pack 1

2 New tags using Frame 1 from ChiChi Designz Cluster Pack 1 - 1st tag is using the art of Kurama Phoenix and i used the cluster as it was apart from 1 thing - I duplicated the crow and moved onto the left side of the tube - On the 2nd tag i used the art of Rossana Castellino and changed the cluster up a little bit!

You can find the clusters HERE

Oriental - PTU

I am using the art of Chris Pastel which you can find HERE

This is an exclusive tube

I am using the PTU Scrapkit Oriental Dream by PinkParadox Productions which you can find HERE

Mask of Choice

Font of Choice

Filters Used:

Eye Candy - Gradient Glow - Fat - White and Pink

Open a new image 600x600

Open Frame 7 and paste as a new layer - Resize by 60 - Sharpen and place in the centre

Open Element 116 - Resize by 65 - Sharpen and place on the bottom left

Open Element 104 - Mirror - Resize by 65 - Sharpen and place on the bottom of the frame

Open Element 112 - Resize by 45 - Sharpen and position on the left of the frame

Open Element 115 - Resize by 76 - Sharpen and position on the left of the tag

Open Element 50 - Resize by 70 - Sharpen and place to the right of the tag

Open ELement 5 - Resize by 40 - Sharpen and place on the far bottom right slightly above the bottom of the tag - Open Element 4 - Resize as before and position on the bottom far left slightly above the bottom

Open Element 23 - Resize by 65 - Sharpen and place on the centre bottom just below centre

Open Element 107 - Resize by 45 - Sharpen andplace on the bottom of the fan 

Open Element 10 - Resize by 25 - Sharpen and place on the bottom right

Open Element 108 - Resize by 60 - Sharpen and place along the bottom

Open your tube and position to the left of the tag

Open Element 87 - Resize by 45 - Sharpen and place in the centre part of the blind - Apply Gradient Glow at the settings above

Open Paper 22 and paste as a new layer - Send to the bottom and apply a mask of choice - merge group - Add drop shadows to your layers - Merge visible - Add correct copyright and licence numbers - merge down - Save as a png - Add your name - Save again and Done

Zombieeee - PTU

I am using the art of Tezza which you can find HERE

I am using the PTU Scrapkit A very zombie valentine by Freya's Scraps which you can find HERE

Mask of Choice

Font of Choice

Open a new image 600x600

Open Element 4 and paste as a new layer - Resize by 55 - Sharpen - Rotate - Free Rotate - 25 Right and place in the centre

Open Hands 3 - Resize by 85 - Sharpen and place on the top left

Open Roses 1 - mirror - resize by 55 - Sharpen and place on the right

Open Glass 1 and paste as a new layer - Resize by 80 - Sharpen and place on the right

Open Sweet 2 - Mirror - Resize by 75 - Sharpen and again place on the right

Open Gift - Resize by 70 - Sharpen and place on the bottom centre

Open Heart 2 - Resize by 75 - Sharpen and place on the right of the previous layer

Open Heart 3 - Mirror - Resize by 85 - Sharpen and place on the far left

Open Gift 1 - Resize by 65 - Sharpen and place on the bottom left

Open Bear 2 - Resize by 60 - Sharpen and place in front of the previous heart layer

Open Gift 5 - Resize by 45 - Sharpen and place on the bottom right

Open your tube and position her in the centre

Open Paper 9 and paste as a new layer - Send to the bottom and apply a mask of choice - merge group - Add drop shadows to your layers - Merge visible - Add correct copyright and licence numbers - merge down - Save as a png - Add your name - Save again and Done

Attitude - PTU

I am using the art of Spazz which you can find HERE

I am using the PTU Scrapkit Ashley made to match the tube by Whisper in the Wind which you can find HERE

Mask of Choice

Font of Choice

Filters Used:

Xero - Radiance - 128, 131, 128, 109

Open a new image 600x600

Open Element 59 - resize by 70 - Sharpen and place in the centre - Open Frame 2 and paste as a new layer - Resize by 70 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 10 and paste as a new layer - Selections - Invert - Delete - Select none and move under the frame - Staying on the paper layer - Open Element 41 - Mirror - Resize by 60 - Sharpen and position on the left - Open Element 21 - Resize by 60 and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 11 - Paste as a new layer - Open your tube and position her in the frame - Selections - Invert - Delete -Select none and move both under the frame - Change the blend mode of the tube to Hard Light - Open Element 101 - Resize by 50 - Sharpen and place on the top - Duplicate and move below the original - merge down - Back to the top layer now!

Open Element 89 and paste as a new layer - Resize by 35 - Sharpen and position on the far left - Open Element 95 - Resize by 45 - Sharpen and place on the bottom right

Open Element 71 - Resize by 35 - Sharpen and place on the bottom right - Duplicate twice more and position on the left of the previous flower - merge all 3 together when happy

Open Element 70 and paste as a new layer - Resize by 75 - Sharpen and place along the top

Open Element 66 - Resize by 55 - Sharpen and place on the right

Open Element 19 -  Resize by 65 - Sharpen and position on the bottom centre of the flowers - Open Element 61 - Resize by 55 - Sharpen and place on the top right - Open Element 67 - Mirror - Resize by 60 - Sharpen and place on the bottom right of the flowers

Open your tube and place to the left slightly - Apply Radiance at the settings above

Open Element 99 - Resize by 45 - Sharpen and position in the middle of the skulls

Open Paper 1  and paste as a new layer - Send to the bottom and apply a mask of choice - merge group - Add drop shadows to your layers - Merge visible - Add correct copyright and licence numbers - merge down - Save as a png - Add your name - Save again and Done

Cluster Frame Show Offs!

2 New tags using Frame 2 from the gorgeous pack by Cindy which is previewed below - The top tag i have used the frame as it is and for the 2nd i changed it completely to show you how versatile these frames actually are!

ChiChi Designs Cluster Pack 1

Peace and Daisies - PTU

I am using the art of Spazz which you can find HERE

I am using the PTU Scrapkit Peace and Daisies by Scrappin' Krazy Designs which you can find HERE 

Mask of Choice

Font of Choice

Filters Used:

Xero - Porcelain - Default - Set blue to 0

Open a new image 600x600

Open Element 11 and paste as a new layer - Resize by 80 -Sharpen and place in the centre

Open Element 15 and paste as a new layer - Resize by 70 - Sharpen and place in the middle

Open Element 19 and paste as a new layer - Resize by 35 - Sharpen and place on the top right - Duplicate - Image - Mirror and merge down

Open Element 1 - Resize by 70 - Sharpen and place on the far right - Duplicate - Image - Mirror - Merge Down - Open Element 3 and paste as a new layer - Resize by 35 - Sharpen and place on the top right - Duplicate and position on the top left - merge down - Duplicate - Image - Mirror and merge down - Open Element 48 - Flip - Resize by 60 - Sharpen and place on the top

Open Element 14 - Resize by 45 - Sharpen and position on the centre far right - Duplicate - Mirror and merge down - Open Element 13 - Resize by 45 - Sharpen and place on the bottom right - Duplicate - Image - Mirror - Merge down

Open Element 21 - Resize by 35 - Sharpen and place on the bottom right - Duplicate - Image - mirror and merge down - Open Element 20 - Resize by 50 - Sharpen and place on the bottom right - Open Element 61 - Resize by 50 - Sharpen and place on the bottom left 

Open Element 40 - Flip - Resize by 60 - Sharpen and place toward the top

Open Element 59 - Resize by 45 - Sharpen and place on the bottom left

Open your tube and position her in the centre - I resized mine by 23 and Sharpened - Apply Porcelain at the settings above

Open Element 52 - Resize by 45 - Sharpen and place on the top left

Open Paper 7 and paste as a new layer - Send to the bottom and apply a mask of choice - merge group - Add drop shadows to your layers - Merge visible - Add correct copyright and licence numbers - merge down - Save as a png - Add your name - Save again and Done

Open Bar - PTU

I am using the art of Trinita which you can find HERE

I am using the PTU Scrapkit Tropicos Caliente by PinkParadox Productions which you can find HERE

Mask of Choice

Font of Choice

Open a new image 600x600

Open Frame 9 - Resize by 65 - Sharpen and place in the centre

Open Element 55 - Resize by 45 - Sharpen and posiiton on the bottom right

Open Element 138 and paste as a new layer - Resize by 80 - Sharpen and place in the centre

Open Element 101 - Resize by 70 - Sharpen and position along the bottom - Duplicate - Mirror - Duplicate and place above the previous layers - merge all together when happy

Open Element 80 - Paste as a new layer - Resize by 65 - Sharpen and place on the sand - Open Element 132 - Resize by 45 - Sharpen and place on the bottom right - Duplicate - Place on the bottom left and move under the bar

Open Element 82 - Resize by 35 - Sharpen and place on the top right of the first frame posted

Open Element 113 - Resize by 45 - Sharpen and flip - Position along the bottom - Open your tube and position to the left - Duplicate and hide for now - Duplicate the flower layer and position to the left - Unhide the duplicated tube - Move to the top and erase the bottom of her feet so it looks as if she is sat through the flowers

Open Element 118 - Resize by 50 - Sharpen and place on the far left - Open Element 4 - Resize by 45 - Sharpen and place on the bottom right - Open Element 33 - Resize by 15 - Sharpen and place on the bar on the left - Open Element 22 - Resize by 45 - Sharpen and place on the far bottom left - Open Elements 28 and 29 - Resize both b y 15 - Sharpen and place on the bar in the centre - merge these together when happy

Open Paper 2 and paste as a new layer - Send to the bottom and apply a mask of choice - merge group - Add drop shadows to your layers - Merge visible - Add correct copyright and licence numbers - merge down - Save as a png - Add your name - Save again and Done

Whatever will be - PTU

I am using the art of Kurama Phoenix which you can find HERE 

I am using the PTU Scrapkit Destiny by Hungry Hill which you can find HERE 

Mask of Choice

Font of Choice

Filters Used:

Eye Candy - Gradient Glow - Fat - White and Purple

Open a new image 600x600

Open WA1 and paste as a new layer - Position slightly to the right

Open Screen and paste as a new layer - Resize by 70 - Sharpen and place in the centre slightly above the bottom - Open Frame 1 - Resize by 70 - Sharpen - Place in the centre - Click inside with your magic wand - Selections - Modify -Expand by 5 - Open your close up tube and position in the left frame - Duplicate - Mirror - Merge down - Selections - Invert - Delete - Select none and move under the frame

Open Glitter Fall - Resize by 60 - Sharpen and place to the right - Duplicate - Image - Mirror and merge down - Open Edge Ruffle - Paste as a new layer - Resize by 60 - Position in the centre over the other frame - Open Doodle 1 - Resize by 50 - Sharpen and place on the bottom left - Duplicate - Image - Mirror and merge down

Open Ivy 2 - Resize by 75 - Sharpen - Place on the right - Duplicate - Image - Mirror and merge down - Open Candle - Resize by 45 - Sharpen and place on the bottom left

Open Bottle - resize by 35 - Sharpen - Place on the bottom right of the candle

Open Flutterby 2 - Resize by 25 - Sharpen and place on the top right - Open Netting 4 - resize by 70 - Sharpen and place in the centre - Open your tube and place in the centre

Open Fabric Roses - Resize by 45 - Sharpen and place on the bottom right - Duplicate and mirror - Duplicate again and resize by 80 - Sharpen and place on the right of the previous layer - Duplicate - Mirror and position next to the original - Merge all 4 layers together

Open WA3 - Resize by 65 - Sharpen and place on the bottom left - Apply Gradient Glow at the settings above

Open Paper 11 and paste as a new layer - Send to the bottom and apply a mask of choice - merge group - Add drop shadows to your layers - Merge visible - Add correct copyright and licence numbers - merge down - Save as a png - Add your name - Save again and Done

Time - PTU

I am using the art of Rossana Castellino which you can find HERE

I am using the PTU IB Rossana Castellino 3-2 Scrapkit by WD Designz which you can find HERE

Mask of Choice

Font of Choice

Filters Used:

Eye Candy - Gradient Glow - Fat - White and greyish colour from the tube

Open a new image 600x600

Open Element 6 - Resize by 70 - Sharpen and place in the centre - Open Element 21 - Resize by 80 - Sharpen and place on the left of the frame - Duplicate - Image - Mirror and merge down - Open Element 3 - Resize by 35 - Sharpen and place on the top right of the frame - Duplicate - Image - Mirror and merge down

Open Element 4 - Resize by 60 - Sharpen and place along the top of the tag

Open Element 13 - Resize by 55 - Sharpen and place on the top of the tag on the left

Open Element 5 - Resize by 70 - Sharpen and place in the centre - Open Element 1 - Mirror - Resize by 45 - Sharpen and place on the top right

Open Element 18 - Resize by 70 - Sharpen and place along the top of the tag

Open your tube and position her in the frame - Open Element 2 - Rotate - 90 Left - Resize by 35 - Sharpen and place on the bottom left of the tube

Open Element 11 - Resize by 80 - Sharpen and place on the bottom left - Open Element 22 - Resize by 25 - Sharpen and place on the bottom left - Duplicate and position on the right of the previous layer - Duplicate and repeat 3 more times and then merge them all together

Open Element 19 - Resize by 50 - Place on the bottom right of the tag

Open Element 24 - resize by 40 - Sharpen and place on the bottom left - Apply Gradient Glow at the settings above

Open Paper 1 and paste as a new layer - Send to the bottom and apply a mask of choice - merge group - Add drop shadows to your layers - Merge visible - Add correct copyright and licence numbers - merge down - Save as a png - Add your name - Save again and Done

Endless Love - PTU

I am using the art of Tiffany Toland-Scott which you can find HERE 

I am using the PTU IB Tiffany Toland-Scott 10-1 by Ladyhawwk Designs which you can find HERE

Font of Choice

Filters Used:

Xero - Radiance - 128, 121, 128, 100

Eye Candy - Gradient Glow - Fat - Light Purple and Dark Purple

Open a new image 600x600

Open Frame 1 and paste as a new layer - Resize by 60 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 5 and paste as a new layer - Open Element 13 - Resize by 65 - Sharpen and place on the top left

Open Element 5 - Resize by 70 - Sharpen and place on the bottom of the tag - Open your tube and position her in the centre - Duplicate and hide for now - Selections - Invert - Delete - Select none and move all under the frame

Open Element 18 - Resize by 65 - Sharpen and place on the top right of the frame

Open Element 26 - Resize by 75 - Sharpen and place on the bottom left - Duplicate - Image - Mirror and merge down - Open Element 16 - Resize by 80 - Sharpen and place on the left - Duplicate - Image - mirror and merge down - Erase the bottom of the tree that sticks out the bottom - Open Element 21 - Resize by 75 - Sharpen and place on the bottom left

Open Element 10 - Resize by 60 - Sharpen and place on the top - Duplicate and position below the original - merge down

Open Element 1 - Image - Rotate - Free Rotate - 90 Right - Resize by 80 - Sharpen and place on the bottom of the frame - Unhide the duplicated tube and position on the top - Erase some of the tube along the bottom - Apply Radiance to the tubes at the settings above

Open Wordart - resize by 60 - Sharpen - Apply Gradient Glow at the settings above - Position along the bottom 

Add drop shadows to your layers - Merge visible - Add correct copyright and licence numbers - merge down - Save as a png - Add your name - Save again and Done

Dark Night - PTU

I am using the art of Anna Marine which you can find HERE

I am using the PTU Scrapkit Gothic Night by Purple Dreams Scraps which you can find HERE

Mask of Choice

Font of Choice

Open a new image 600x600

Open Frame 2 and paste as a new layer - Resize by 80 - Sharpen and place in the centre - Click inside with your magic wand - Selections - modify - Expand by 4 - Open Paper 9 and paste as a new layer - Resize by 70 - Sharpen - Open Window - Resize by 85 - Sharpen and place on the right of the frame - Duplicate - Image - Mirror - merge down - Open Vine - Resize by 90 - Sharpen and place on the top right - Open your tube and place her in the centre - Duplicate and hide for now - Selections - Invert - Delete - Select none and move all under the frame

Open Skull Wings - resize by 70 - Sharpen and place on the bottom centre of the tag

Open Sparkles - Resize by 80 - Sharpen and place on the top - Duplicate and position below the original - merge down

Open Bush - resize by 80 - Sharpen and place on the bottom right - Duplicate - Image - Mirror and merge down - Open Chain - Resize by 90 - Sharpen and place on the top of the frame

Open Cloud and position along the top of the frame

Unhide your duplicated tube and move to the top - Erase parts of the tube along the bottom

Open Paper 4 and paste as a new layer - Send to the bottom and apply a mask of choice - merge group - Add drop shadows to your layers - Merge visible - Add correct copyright and licence numbers - merge down - Save as a png - Add your name - Save again and Done

FTU Cluster Frame

Brand new FTU Cluster Frame made using the gorgeous scrapkit Nine in the Afternoon by Abstract Creations - The cluster can be downloaded HERE

Timeless - PTU

I am using the art of Verymany which you can find HERE

I am using the PTU Scrapkit Nine in the Afternoon by Abstract Creations which you can find HERE

Mask of Choice

Font of Choice

Open a new image 600x600

Open Element 42 and paste as a new layer - Resize by 70 - Sharpen - Image - Rotate - Free Rotate - 30 Left and place in the centre

Open Element 23 and resize by 65 - Sharpen and place in the centre - Click inside with your magic wand - Seletions - Modify - Expand by 5 - Open Paper 8 and paste as a new layer - Open Element 17 - Resize by 65 - Sharpen and place on the left - Duplicate - Image - Mirror and merge down - Open your tube and place her in the centre - Resize her if needed - Duplicate and hide for now - Selections - Invert - Delete - Select none and move all under the frame - Open ELement 36 - Resize by 45 - Sharpen and place on the bottom left

Open Element 12 - Resize by 35 - Sharpen and place on the right of the previous layer

Open Element 29 - Resize by 55 - Sharpen and place on the top right corner of the frame - Duplicate - resize by 80 - Sharpen and place on the top left of the frame - merge down

Open Element 7 - Resize by 80 - Sharpen and place in the centre

Open Element 17 - Resize by 45 - Sharpen and place on the top left

Open Element 37 - Resize as before and place on the right

Open Element 33 - Resize by 60 - Sharpen and place on the top right of the frame

Open Element 9 - Resize by 35 - Sharpen and place on the bottom right

Unhide your duplicated tube and erase any that sticks out from the elements

Open Element 35 - Resize by 50 - Sharpen - Flip and position on the bottom right of the tube - Duplicate - Mirror and position next to the original - merge down

Open Element 19 - Resize by 80 - Sharpen and place over the previous layers

Open Element 39 - Mirror - Resize by 35 - Sharpen and place on the bottom right

Open Element 38 - Mirror - Resize by 55 - Sharpen and place on the right

Open Paper 3 and paste as a new layer - Send to the bottom and apply a mask of choice - merge group - Add drop shadows to your layers - Merge visible - Add correct copyright and licence numbers - merge down - Save as a png - Add your name - Save again and Done

©Verymany http://verymanytubes.com

VMT_lisa Scrapkit by Abstract Creations

Riding Hood - PTU

I am using the art of PinUpToons which you can find HERE

I am using the PTU IB PinUpToons 194-2 by Monti's Scraps which you can find HERE

Mask of Choice

Font of Choice

Filters Used:

Porcelain - Default - Set Blue to 0

Eye Candy - Gradient Glow - White and Red

Open a new image 600x600

Open Element 3 - Resize by 85 - Sharpen and place in the centre

Open Element 17 - Resize as before and position to the right of the previous layer

Open Element 10 and paste as a new layer - Resize by 70 - Sharpen and position on the top right of the trees - Open Element 1 - Resize by 85 - Sharpen and place on the bottom left

Open Element 21 - Mirror - Resize by 65 - Sharpen and place on the bottom right

Open Element 5 - Resize by 65 - Sharpen and place on the right

Open Wordart and resize by 80 - Sharpen and place on the right of the tree - Apply Gradient Glow at the settings above

Open Element 2 - Resize by 45 - Sharpen and position in front of the wolf

Open your tube and place her to the left - Apply Porcelain at the settings above

Open Paper 6 and paste as a new layer - Send to the bottom and apply a mask of choice - merge group - Add drop shadows to your layers - Merge visible - Add correct copyright and licence numbers - merge down - Save as a png - Add your name - Save again and Done

Night Bride - PTU

I am using the art of Enamorte which you can find HERE 

I am using the PTU Scrapkit Bundle Enamorte Package 34 by Foxys Designz which you can find HERE 

Mask of Choice

Font of Choice

Open a new image 600x600

Open Frame 2 and paste as a new layer - Resize by 80 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 12 - Open Element 26 and paste as a new layer - Resize by 70 - Sharpen and place in the centre slightly above the bottom - Selections - Invert - Delete - Select none and move all under the frame

Open Element 5 and place along the top of the tag

Open Element 17 and paste as a new layer - Resize by 60 - Sharpen and place on the right

Open Element 19 - Mirror - Resize by 60 - Sharpen and place on the left

Open Element 34 and paste as a new layer - Resize by 70 - Sharpen and place on the bottom right - Duplicate and mirror - merge down

Open ELement 40 - Resize by 70 - Sharpen and place in the centre - Duplicate and position underneath - merge together when happy - Duplicate and position along the bottom - merge 

Open Element 6 and paste as a new layer - Resize by 75 - Sharpen and place on the top right - Duplicate and place below - Repeat this until you reach the bottom - Merge them all together - Duplicate - Mirror and merge down - Duplicate and resize by 80 - Sharpen and place below the original - merge all together

Open your tube and position her in the centre

Open Paper 9 and paste as a new layer - Send to the bottom and apply a mask of choice - merge group - Add drop shadows to your layers - Merge visible - Add correct copyright and licence numbers - merge down - Save as a png - Add your name - Save again and Done

Prayer - PTU

I am using the art of Enamorte which you can find HERE 

I am using the PTU Scrapkit Bundle Enamorte Package 34 by Foxys Designz which you can find HERE 

Mask of Choice

Font of Choice

This is a very quick but effective tutorial!

Open a new image 600x600

Open Element 14 - Resize by 85 - Sharpen and position in the centre

Open Element 29 - Resize by 80 - Sharpen and place on the left of the canvas - Duplicate and mirror - merge down

Open Element 38 - Resize by 80 - Sharpen and place on the bottom right - Duplicate - Image -  Mirror and merge down when happy

Open your tubes and place in the centre of the tag

Open Element 20 - Resize by 90 and place along the bottom of the tube

Open Element 21 - Resize by 65 - Sharpen and place on the bottom right - Duplicate - Image - Mirror and merge down 

Open Paper 4 and paste as a new layer - Send to the bottom and apply a mask of choice - merge group - Add drop shadows to your layers - Merge visible - Add correct copyright and licence numbers - merge down - Save as a png - Add your name - Save again and Done

Darkside - PTU

I am using the art of Enamorte which you can find HERE 

I am using the PTU Scrapkit Bundle Enamorte Package 34 by Foxys Designz which you can find HERE 

Mask of Choice

Font of Choice

Filters Used:

Eye Candy - Gradient Glow - Fat White

Open a new image 600x600

Open Frame 5 and paste as a new layer - Resize by 60 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 5 and paste as a new layer - Open Element 1 - Resize by 70 - Sharpen and Selections - Invert - Delete - Select none and move all under the frame

Open Element 12 - Resize by 75 - Sharpen and position on the far left

Open Element 9 - Resize by 70 - Sharpen and position on the top right

Open Element 10 - Resize by 65 - Sharpen and place on the bottom left - Duplicate - Image - Mirror and merge down when happy

Open your tube and place her in the centre of the tag

Open Element 28 - Resize by 60 - Sharpen and place on the bottom of the tube

Open Wordart 1 - Resize by 50 - Sharpen and place along the bottom - Apply Gradient Glow at the settings above - Open Element 2 - Resize by 60 - Sharpen and place on the top left

Open Paper 3 and paste as a new layer - Send to the bottom and apply a mask of choice - merge group - Add drop shadows to your layers - Merge visible - Add correct copyright and licence numbers - merge down - Save as a png - Add your name - Save again and Done

Legends - PTU

I am using the art of Anna Marine which you can find HERE

I am using the PTU Scrapkit Legends and Dragons by MarieL-Designs which you can find HERE

Mask of Choice

Font of Choice

Open a new image 600x600

Open Cloud and paste as a new layer - Resize by 70 - Sharpen and place on the top right

Open Frame 1 and paste as a new layer - Resize by 90 - Sharpen and place in the centre - Click inside both frames with your magic wand - Selections - Modify - Expand by 5 - Open Paper 6 and paste as a new layer - Open Tree and paste as a new layer - Resize by 60 and place on the right - Duplicate - Mirror and merge down - Open your close up tube and position in the right frame - Duplicate and position in the left - merge down when happy and delete any that falls into the opposite frames - Selections - Invert - Delete - Select none and move all under the frame - Change the blend mode of the tubes to Luminance

Open Flower 5 - Resize by 60 - Sharpen and place on the far right of the right frame - Duplicate - Image - Mirror and merge down

Open Sparkle 1 and position in the centre of the tag

Open Flower 3 - Resize by 70 - Sharpen and place on the left - Duplicate - Image - Mirror and merge down - Image - Flip and position on the top of the frame

Open Grass 1 and position on the bottom of the tag

Open your tube and place her in the centre of the tag

Open Paper 13 and paste as a new layer - Send to the bottom and apply a mask of choice - merge group - Add drop shadows to your layers - Merge visible - Add correct copyright and licence numbers - merge down - Save as a png - Add your name - Save again and Done

Perfect Day - PTU

I am using the art of Anna Liwanag which you can find HERE

This is one of her incredible Bonus Tubes

I am using the PTU Scrapkit Tuesday Afternoons by Hungry Hill which you can find HERE

Mask of Choice

Font of Choice

Open a new image 600x600

Open WA1 and paste as a new layer - Resize by 80 - Sharpen and place on the right of the tag

Open Frame 3 and paste as a new layer - Resize by 56 - Sharpen and position on the top left of the tag - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 2 and paste as a new layer - Open your tube and position in the frame - Selections - Invert - Delete - Select none and move under the frame - Change the blend mode of the close up tube to Luminance

Open Glitter - Resize by 65 - Sharpen and place toward the top - Duplicate and move toward the bottom - merge together - Open Grass and paste as a new layer - Resize by 90 - Sharpen and place on the bottom left - Open Chair - Resize by 55 - Sharpen and place on the right

Open Ribbon 3 - Resize by 70 - Sharpen and place in the centre

Open Snail - Resize by 80 - Sharpen and place on the bottom left of the chair

Open Cup Stack - Resize by 45 - Mirror and place on the bottom right of the tag - Sharpen

Open Cup with Flower - Resize by 60 - Sharpen and place on the bottom right

Open your tube and position her in the centre

Open WA2 - Resize by 85 - Sharpen and place along the bottom of the tag

Open Paper 5 and paste as a new layer - Send to the bottom and apply a mask of choice - merge group - Add drop shadows to your layers - Merge visible - Add correct copyright and licence numbers - merge down - Save as a png - Add your name - Save again and Done

FTU Cluster Frame

FTU Cluster Frame can be found HERE using the PTU Scrapkit Rock your World by Abstract Creations

Wicked White - PTU

I am using the art of Lea Barozzi which you can find HERE

I am using the PTU Scrapkit Wicked White by Foxys Designz which you can find HERE

Mask of Choice

Font of Choice

Filters Used:

Xero - Radiance - 128, 50, 128, 85

Open a new image 600x600

Open Element 17 and paste as a new layer - Resize by 60 - Sharpen and place in the centre

Open Element 30 - Resize by 65 - Sharpen and place on the bottom left of the heart - Duplicate - mirror and place on the top right of the heart - merge down

Open Element 28 - Resize by 80 - Sharpen and place on the left of the tag - Duplicate - Image - Mirror and merge down when happy

Open Element 34 and paste as a new layer - Resize by 85 - Sharpen and place on the left

Open Element 11 - Resize by 60 - Sharpen and place on the bottom left

Open Element 3 - Resize by 45 - Sharpen and place on the bottom right of the tag - Duplicate - Mirror and position on the bottom left - merge down

Open the Skull that comes with the tube and resize by 80 - Sharpen and place on the bottom right - Open your tube and position in the centre - Apply Radiance at the settings above

Open Element 22 - Resize by 60 - Sharpen and place on the bottom of the tube

Open Paper 2 and paste as a new layer - Send to the bottom and apply a mask of choice - merge group - Add drop shadows to your layers - Merge visible - Add correct copyright and licence numbers - merge down - Save as a png - Add your name - Save again and Done

Toxic - PTU

I am using the art of Spazz which you can find HERE 

I am using the PTU Scrapkit Wicked by Whisper in the Wind made to match the tube which you can find HERE 

Mask of Choice

 Font of Choice

 Filters Used:

 Eye Candy - Gradient Glow - Thin - Black (on the dragon) 

Fat - White and Black (on the wordart) 

 Open a new image 600x600 

Open Element 7 - Mirror and resize by 60 - Sharpen and place on the top right Open Element 54 - Resize by 70 - Sharpen and place on the right - Open Element 46 and paste as a new layer positioning to the right of the centre Open Element 44 - Mirror - Resize by 80 - Sharpen and place to the right Open Element 23 - Resize by 60 - Sharpen and place to the left Open Element 88 - Resize by 70 - Sharpen and place toward the bottom - Open Element 56 - Resize by 45 - Sharpen and place on the bottom left - Open Element 6 - Resize by 80 - Sharpen and place to the right - Open Element 19 - Resize by 70 - Sharpen and place to the right Open Element 30 - Resize by 70 - Sharpen and place on the bottom - Open Element 45 - Resize by 35 - Sharpen and place on the bottom right - Duplicate - Image - Mirror and merge down Open Element 14 - Resize by 55 - Sharpen and place on the bottom left Open Element 42 - Resize by 45 - Sharpen and place on the left of the previous layer Open your tube and position her to the right slightly Open Element 26 - Resize by 35 - Sharpen and place on the top left Open Element 38 - Resize by 35 - Sharpen and mirror - place on the bottom right Open Element 13 - Resize by 45 - Sharpen and place on the bottom - Apply Gradient Glow at the settings above - Open Element 40 - Resize by 45 - Sharpen and place on the wordart - Apply Gradient glow at the settings above 

 Open Paper 5 and paste as a new layer - Send to the bottom and apply a mask of choice - merge group - Add drop shadows to your layers - Merge visible - Add correct copyright and licence numbers - merge down - Save as a png - Add your name - Save again and Done

Smitten - PTU

I am using the art of Enamorte which you can find HERE

This particular tube is her June 2014 Bonus Tube

I am using the PTU IB Enamorte June 2014 Bonus Tube Scrapkit by ChiChi Designz which you can find HERE

Mask of Choice

Font of Choice

Filters Used:

Xero - Radiance - 128, 170, 128, 131 

Eye Candy - Gradient Glow - Fat - White and colour from your tube

Open a new image 600x600

Open Brush and paste as a new layer - Resize by 60 - Sharpen and place on the top left - Duplicate - Mirror - Flip and position on the bottom right - merge down

Open Frame 3 and paste as a new layer - Resize by 70 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 1 and paste as a new layer - Open Diamond Rain - Resize by 70 - Sharpen and position toward the top - Open your tube and place her in the centre of the frame - Duplicate and hide for now - Selections - Invert - Delete - Select none and move under the frame

Open Leaves - Resize by 70 - Sharpen and place toward the top of the frame

Open Ribbon - Flip - Position toward the top of the frame also

Open Sparkles - Resize by 70 - Sharpen and place toward the top - Duplicate and hide for now - Open Violin - Resize by 70 - Sharpen and place to the left

Open Leaves 2 - Resize by 60 - Sharpen and place on the top left - Duplicate - Mirror and merge down - Open Bow and paste as a new layer - Resize by 35 - Sharpen and place on the bottom right - Open Keychain - Resize by 50 - Sharpen and place on the right

Unhide your duplicated tube and move her to the top - Apply Radiance to both layers at the settings above - Unhide your duplicated sparkles and move them to the bottom of the tag

Open Doodle - Resize by 70 - Sharpen and place on the bottom right

Open the candle and resize by 45 - Sharpen and place on the bottom right also

Open Bird - Mirror - Resize by 75 - Sharpen and place on the top of the keychain

Open Wordart shadowed and place as a new layer along the bottom - resize by 65 - Sharpen and apply Gradient Glow at the settings above

Open Paper 2 and paste as a new layer - Send to the bottom and apply a mask of choice - merge group - Add drop shadows to your layers - Merge visible - Add correct copyright and licence numbers - merge down - Save as a png - Add your name - Save again and Done

Beauty Within FTU Cluster Frame

FTU Cluster Frame using the gorgeous PTU Scrapkit Beauty Within by Abstract Creations

You can download the frame HERE

Vampire Bride - PTU

I am using the art of Enamorte which you can find HERE 

I am using the PTU Scrapkit Vampire Bride by PinkParadox Productions which you can find HERE 

Mask of Choice

Font of Choice

Open a new image 600x600

Open Element 113 and paste as a new layer - Resize by 70 - Sharpen and place on the bottom

Open Element 104 and paste as a new layer - Resizeby 55 - Sharpen and position to the right

Open Frame 16 and paste as a new layer - Resize by 65 - Sharpen and place in the centre - Click inside with your magic wand -Selections - Modify - Expand by 5 - Open Paper 34 and paste as a new layer - Selections - Invert - Delete -Select none and move under the frame - Keeping on the paper layer - Open Element 142 and paste as a new layer - Resize by 60 - Sharpen and place toward the bottom - Open Element 141 and resize by 50 - Position over the previous layer - open Frame 20 - Resize by 75 - Sharpen and place in the centre

Open Element 71 - Resize by 80 - Sharpen and place to the right - Duplicate - Image - mirror and merge down - Open Element 58 - Resize by 70 - Sharpen and place on the right of the frame - Duplicate - Image - Mirror and merge down

Open Element 38 - Resize by 40 - Sharpen and place on the bottom left

Open Element 19 - Resize by 50 - Sharpen and place on the bottom right - Open Element 151 - Resize by 35 - Sharpen and position on the bottom right toward the centre - Duplicate - Mirror and merge down when happy - Open Element 78 and resize by 60 - Sharpen and place on the bottom left - Open Element 2 - Resize by 60 - Sharpen and place on the bottom centre

Open Element 50 - Resize by 35 - Sharpen and position on the bottom left - Open Element 41 - Resize by 45 - Sharpen and place on the bottom right

Open Element 1 - Resize by 15 - Sharpen and place on the bottom centre of the cake - Duplicate - resize by 85 - Sharpen and place behind the original and to the right - merge down - Duplicate and move over to the far bottom right - Open Element 8 - Resize by 60 - Sharpen and place to the left - Duplicate and merge down - Open your tube and position in the centre - Move her down till you reach the skull layer on the bottom right and move the sparkles underneath that layer also

Open Paper 11 and paste as a new layer - Send to the bottom and apply a mask of choice - merge group - Add drop shadows to your layers - Merge visible - Add correct copyright and licence numbers - merge down - Save as a png - Add your name - Save again and Done

Sleeping Beauty - PTU

I am using the art of  Katerina Koukiotis which you can find HERE

I am using the PTU Scrapkit Hints of Purple by AngelWing Scraps which you can find HERE

Font of Choice

Filters Used:

Xero - Radiance - 128, 50, 128, 134

Open a new image 600x600

Open Element 6 and paste as a new layer - Resize by 85 - Sharpen and place in the centre

Open Element 62 - Resize by 60 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 13 and paste as a new layer - Open your tube and position - Selections - Invert - Delete - Select none and move under the frame - Apply Radiance to the tube at the settings above

Open Element 60 - Rotate - 90 Left - Resize by 70 and position on the top half of the tube

Open Element 43 - Resize by 70 - Flip - rotate by 45 left - Position on the right of the tag - Duplicate - Mirror and merge down

Open Element 39 - Resize by 70 - Sharpen and position on the bottom right - Duplicate - Mirror - Duplicate again and rotate by 90 left - Position on the bottom left of the frame

Open Element 21 - Resize by 35 - Sharpen and place on the bottom far left - Duplicate and position on the right of the original - Merge down - Duplicate - Mirror - Merge down

Open Element 25 - Resize by 70 - Sharpen and place on the bottom left

Open Element 47 - Resize as before and place over the previous layer - Duplicate - Position on the right of the original and merge down - Open Element 5 - Resize by 70 - Sharpen and place on the bottom right - Open Element 46 - Resize as 45 - Sharpen and position on the bottom right of the previous layer - Duplicate and position on the left of the previous layer - merge down - Open Element 49 - Resize by 56 - Sharpen and position on the left of the previous layer - Duplicate the previous layer and move to the right of the recent flower layer - merge all these together - Duplicate and position on the top middle of the frames

Open Element 64 - Position on the bottom of the tag - Duplicate - Image - Flip and merge down

Add drop shadows to your layers - Merge visible - Add correct copyright and licence numbers - merge down - Save as a png - Add your name - Save again and Done

Steamy - PTU

I am using the art of Trinita which you can find HERE 

I am using the PTU Scrapkit Steampunkd by Abstract Creations which you can find HERE 

Mask of Choice

Font of Choice

Open a new image 600x600

Open Element 12 and paste as a new layer - Resize by 95 - Sharpen and place in the centre

Open Element 36 - Resize by 85 - Sharpen and place over the previous layer

Open Element 6 - resize by 90 - Sharpen and position in the centre

Open Element 3 - Resize by 70 - Sharpen and position on the top left

Open Element 10 - Resize by 80 - Sharpen and position on the bottom left

Open Element 27 - Position on the bottom right of the frame - Open Element 37 - Resize by 60 - Sharpen and place on the bottom right slightly above the bottom - Open Element 20 - Resize by 35 - Sharpen and place on the bottom left of the previous layer - Open Element 10 - Mirror - Resize by 45 - Sharpen and place on the top left

Open Element 31 - Rotate - 35 Right - Resize by 45 - Sharpen and place on the top right

Open Element 17 - Resize by 55 - Sharpen and place on the bottom left - Open Element 15 - Mirror - Resize by 35 - Sharpen and place on the left of the previous layer

Open Element 5 - resize by 45 - Sharpen and place on the bottom left - Open your tube and position her in the centre of the tag - Open Element 19 - Position along the botton of the tube and erase any that sticks out underneath

Open paper 9 and paste as a new layer - Send to the bottom and apply a mask of choice - merge group - Add drop shadows to your layers - Merge visible - Add correct copyright and licence numbers - merge down - Save as a png - Add your name - Save again and Done

Moon Music - PTU

I am using the art of Kurama Phoenix which you can find HERE 

I am using the PTU Scrapkit Kurama Phoenix Package 13 Bundle by Foxy's Dezignz which you can find HERE 

Mask of Choice

Font of Choice

Filters Used:

Xero - Radiance - 128, 50, 128, 115

Open a new image 600x600

Open Element 24 - Resize by 80 - Sharpen and position toward the top

Open Frame 5 - Resize by 60 - Sharpen - rotate - free rotate 90 right and place in the centre

Open Frame 1 - Resize as before - Position toward the top of the previous layer - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 8 and place in the centre - Selections - Invert - Delete - Select none and move under the frame

Open Element 29 - Resize by 80 - Sharpen and position on the top centre

Open Element 26 - Resize by 50 - Sharpen and position on the right

Open Element 28 - Resize by 80 - Sharpen and place on the far left

Open Element 2 - Resize by 80 - Sharpen and place on the top right corner of the frame - Dupliate and position below the original - merge down

Open Element 9 - Resize by 55 - Sharpen and place on the bottom right

Open Element 7 - Resize by 35 - Sharpen and position on the left

Open Element 10 - Resize by 80 - Sharpen and position on the bottom right

Open Element 25 - Resize by 35 - Sharpen and position on the top left of the moon - Duplicate and position on the top right - merge down

Open Element 38 - Resize by 50 - Sharpen and place on the top left

Open Element 12 - Rotate - left - 30 - Position on the top right of the moon

Open your tube and position her to the left - Apply Radiance at the settings above - Open Element 19 - Resize by 45 - Sharpen and place on the bottom right - Duplicate 3 times and position on the right of each other - merge down

Open Paper 11 and paste as a new layer - Send to the bottom and apply a mask of choice - merge group - Add drop shadows to your layers - Merge visible - Add correct copyright and licence numbers - merge down - Save as a png - Add your name - Save again and Done