Angel Doll - PTU

I am using the art of Derzi which you can find HERE

I am using the PTU Scrapkit Winter Fantasy by TinyTurtle designs which you can find HERE

Mask of Choice

Font of Choice

Filters Used:

Xero - Radiance - 222, 222, 103, 173

Open a new image 600x600

Open Element 43 and paste as a new layer - Resize by 80 - Sharpen and place in the centre

Open Element 18 - Paste as a new layer - resize by 60 - Sharpen and place to the bottom - Duplicate - Image - Flip - Merge down

Open Element 127 and paste as a new layer - resize by 40 - Sharpen and position on the middle right

Open Element 11 and paste as a new layer - resize by 80 - Sharpen and place in the centre

Open Element 111 and paste as a new layer - resize by 70 - Sharpen - Place on the left - Duplicate - Image - Mirror and merge down

Open Element 12 - Resize by 80 - Sharpen and place in the centre

Open Element 151 and paste as a new layer - Resize by 60 - Sharpen and position on the right

Open Element 16 - Image - Flip - resize by 70 - Sharpen and place on the bottom

Open Element 129 and paste as a new layer - Resize by 80 - Sharpen and place on the left

Open Element 130 - Resize as before and place over the previous layer

Open Element 8 - resize by 50 - Sharpen and place on the bottom of the tree

Open Element 6 - resize by 70 - Sharpen - Place on the bottom

Open Element 96 - Resize by 50 - Sharpen and place on the bottom right

Open Element 125 and paste as a new layer - resize by 30 - Sharpen and place on the top of the house

Open your tube - Paste as a new layer - Place in the centre and apply Radiance at the settings above - Apply Porcelain - Default settings

Open Paper 2 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge group

Add drop shadows to your layers - Merge visible

Add correct copyright and licence information - merge down

Save as a png - Add your name - Save again - Done

Santa's Helper - PTU

I am using the art of Derzi which you can find HERE

I am using the PTU Scrapkit Derzi Cane by TinyTurtleDesigns which you can find HERE

Mask of Choice

Font of Choice

Filters Used:

Xero - Radiance - 128, 128, 85, 131

Open a new image 600x600

Open Element 41 and paste as a new layer - Resize by 80 - Sharpen - Image - Mirror and position on the top right of the tag

Open Element 42 - Resize as before and position on the top left

Open Element 94 and paste as a new layer - resize by 60 - Sharpen and position in the top middle

Open Element 128 - Image - Mirror - Resize by 50 - Sharpen and position to the top left of the previous layer

Open Element 33 and paste as a new layer - Resize by 30 - Sharpen and place on the right of the previous layer

Open Element 2 and paste as a new layer - resize by 80 - Sharpen - Position in the centre

Open Element 130 and paste as a new layer - Image - Mirror - Resize by 50 - Sharpen and place on the top right

Open Element 11 and paste as a new layer - resize by 50 - Sharpen - Place on the top left

Open Element 22 and paste as a new layer - Resize by 40 - Sharpen and position on the bottom left

Open Element 106 and paste as a new layer - Image - Mirror - resize by 60 - Sharpen and position on the bottom right

Open Element 124 and paste as a new layer - resize by 80 - Sharpen and place on the right

Open Element 85 - Resize by 25 - Sharpen and position on the right of the tree

Open Element 71 - Image - Mirror - Resize by 60 - Sharpen and position on the left of the tree

Open Element 21 - resize by 50 - Sharpen and place on the left of the previous layer

Open Element 109 and paste as a new layer - Resize by 35 - Sharpen and place on the bottom left of the clock

Open your tube and paste as a new layer - Position on the bottom left and apply Radiance at the settings above

Open Paper 33 and paste as a new layer - Send to the bottom and apply a mask of choice - merge group

Add drop shadows to your layers - Merge visible

Add correct copyright and licence information - merge down

Save as a png - Add your name - Save again - Done

Gothy Xmas - PTU

I am using the art of Ninaste which you can find HERE

I am using the PTU Scrapkit Red and Black Daisy Fairy kit by TTD which you can find HERE

Mask of choice

Font of Choice

Open a new image 600x600

Open Element 68 and paste as a new layer - resize by 90 - Sharpen

Position on the bottom of the tag

Open Element 58 and paste as a new layer

Resize by 70 - Sharpen and position on the top left

Duplicate - Image - Mirror and Merge down

Open Element 62 and paste as a new layer

Resize by 70 - Sharpen - Image - Rotate - 45 Right - Place in the centre

Open Element 111 and paste as a new layer

Resize by 50 - Sharpen and position on the bottom  left of the frame

Open Element 61 and paste as a new layer

Resize by 90 - Position on the bottom of the tag

Open Element 119 - Resize by 40 - Sharpen - Position on the top right

Open Element 117 and paste as a new layer - resize by 30 - Sharpen and position on the top right of the tag

Open Element 112 and paste as a new layer - Resize by 25 - Sharpen and position on the left of the tag

Open Element 20 and paste as a  new layer - resize by 35 - Sharpen and position on the bottom left

Open Element 18 and paste as a new layer - Resize by 75 - Sharpen and position on the right

Open Element 63 and paste as a new layer - Image - Mirror - resize by 40 - Sharpen - Place on the bottom centre of the tag

Open Element 50 - Resize by 40 - Sharpen and position on the right of the sign

Open Element 95 - Image - Mirror - Resize by 55 - Sharpen - Place on the bottom left

Open Element 80 - Resize by 40 - Sharpen - Place on the bottom right

Open your tube and paste as a new layer - Position to the left centre

Open Paper 12 and paste as a new layer - Send to the bottom and apply a mask of choice - merge group

Add drop shadows to your layers - Merge visible

Add correct copyright and licence information - merge down

Save as a png - Add your name - Save again - Done

Daisy Fairy - PTU

I am using the art of Ninaste which you can find HERE

I am using the PTU Scrapkit Daisy Fairy by TTD made to match the tube which you can find HERE

Mask of Choice

Font of Choice

Open a new image 600x600

Open Element 111 and paste as a new layer

Resize by 80 - Sharpen and position in the centre

Open Element 35 and paste as a new layer - Resize by 70 - Sharpen - position on the bottom right - Duplicate - Image - Mirror and Merge Down

Open Element 67 - Paste as a new layer

Resize by 60 - Sharpen - Position on the bottom left - Duplicate - Image - Mirror - merge down - Duplicate - Image - Flip and Merge Down

Open Element 121 and paste as a new layer - Resize by 80 - Sharpen - place on the bottom left - Duplicate - Image - Mirror and Merge Down

Open Element 109 and paste as a new layer - Resize by 30 - Sharpen and place on the bottom left

Open Element 110 and paste as a new layer - Resize by 70 - Sharpen and place in the centre - Click inside all with your magic wand - Selections - Modify - Expand by 5 - Open Paper 39 and paste as a new layer - Position - Open a close up of your tube and place in the frame - Selections - Invert - Delete - Select None on both and move both under the frame

Change the blend mode of the tube to Luminance

Open Element 33 and paste as a new layer - Resize by 25 - Sharpen and place in between the frames on the left - Duplicate - Resize by 90 - Sharpen - Place next to the original and Merge Down

Open Element 48 and paste as a new layer - Resize by 40 - Sharpen and place on the middle right

Open Element 53 and paste as a new layer - Resize by 40 -Sharpen and posiiton on the bottom left next to the cake

Open Element 61 and paste as a new layer - Position on the right

Open Element 91 and paste as a new layer - Resize by 80 - Sharpen and place in the centre

Open Element 64 and paste as a new layer - Resize by 25 - Sharpen and position on the bottom right

Open Element 70 - Resize by 40 - Sharpen and position on the bottom left on the right of the candles

Open your tube and paste as a new layer - Resize and position in the centre

Open Element 120 - Image - Mirror - Resize by 25 - Sharpen and place on the far left

Open Paper 30 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge group

Add drop shadows to your layers - Merge Visible

Add correct copyright and licence information - merge down

Save as a png - Add your name - Save again - Done

Dark Dex - PTU

I am using the art of Christine Marie Kotlark which you can find HERE

I am using the PTU Scrapkit Dexter made to match the kit by Tiny Turtle Designs which you can find HERE

Mask of Choice

Font of Choice

Filters Used:

Eye Candy - Gradient Glow - Red and White - Fat

Xero - Radiance - 188, 134, 185, 173

Open a new image 600x600

Open Element 108 and paste as a new layer - Resize by 70 - Sharpen

Position to the left of the tag

Click inside with your magic wand

Selections - Modify - Expand by 5

Open Element 37 and paste as a new layer

Open your close up tube and position in the frame

Selections - Invert - Delete - Select None and move both under the frame

Change the blend mode of the tube to Luminance L

Open Element 140 - Paste as a new layer - Resize by 80 - Sharpen

Position at the top of the frame and apply Gradient Glow at the settings above

Open Element 133 and paste as a new layer

Send to the bottom and move to the right a little

Open your main tube and paste - Resizing if necessary - I Mirrored mine and resized by 75 - Sharpen

Position him on the right of the frame

Open Element 192 and paste - Resize by 60 - Sharpen and position to the left of the frame

Open Element 178 - Resize by 40 and then again by 60 - Sharpen More - Position on the left of the frame in the middle of the candle

Click on the frame layer - Open Element 105 - Resize by 70 - Sharpen and position behind the tube

Apply Radiance to your tube at the settings above

Open Element 35 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group

Add drop shadows to your layers - Merge Visible

Add correct copyright and licence information - Merge Down

Save as a png - Add your name - Save again - Done

Nina - PTU

I am using the art of Skyscraps which you can find HERE

I am using the PTU Scrapkit Nina Terror by Tiny Turtle Designs made to match the tube which you can find HERE

Mask of Choice

Font of Choice

Filters Used:

Xero - Radiance - 100, 70, 128, 39

Open a new image 600x600

Open Element 57 and paste as a new layer - Resize by 90 - Sharpen

Position in the centre

Open Element 83 and paste as a new layer - Position over the previous layer

Click inside this with your magic wand

Selections - Modify - Expand by 5 - Open Paper 2 and paste as a new layer 

Open a close up of your tube and position - Selections - Invert - Delete - Select None and change the blend mode to Screen

Open Element 65 and paste as a new layer - Image - Mirror and position on the left of the tag

Click inside with your magic wand - Selections - Modify - Expand by 5

Open Paper 1 and paste as a new layer - Selections - Invert - Delete - Select None and move under the frame

Open your main tube and paste as a new layer - Resizing if necessary

Position on the left of the tag over the previous layer

Open Element 10 and paste as a new layer - Resize by 60 - Sharpen and position on the bottom of the tube

Open Element 9 and paste as a new layer - Resize by 70 - Sharpen and position on the bottom right

Click on the tube layer and open Element 100 - Resize by 70 - Sharpen and position toward the bottom

Duplicate and send to the top over the clock

Open Element 34 - Resize by 50 - Sharpen - Position on the right of the first frame

Open Element 8 and paste as a new layer - Send to the bottom

Click on the circular frame - Open Element 87 and paste as a new layer - Resize by 50 - Sharpen and position on the top right

Apply Radiance to your tube at the settings above

Open Paper 19 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group

Add drop shadows to your layers - Merge Visible

Add correct copyright and licence information - Merge Down

Save as a png - Add your name - Save again - Done

Mysterious Billie - PTU

 

 I am using the art of Christine Marie Kotlark which you can find HERE
I am using the PTU Scrapkit Mysterious Midnight by Tiny Turtle Designs which you can find HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 5 and paste as a new layer - Resize by 85 - Sharpen and position in the centre
Open your tube and place as a new layer
Position in the centre of the sofa so it looks as if he is sitting on it
Open Element 64 and paste as a new layer
Resize by 40 - Sharpen and position on the bottom centre over his foot
Duplicate - Image - Mirror and merge Visible
Open Element 79 and paste as a new layer - Resize by 50 - Sharpen and position to the far left - Duplicate - Image - Mirror and merge down
See my tag for placement ideas
Open Element 7 and paste as a new layer
Resize by 40 - Sharpen and position behind the sofa on the top right
Open Element 3 and paste as a new layer - Resize by 60 - Sharpen and position on the right
Place above the sofa layer behind the berries
Open Element 23 and paste as a new layer - Resize by 90 and send to the bottom
Open Element 96 and paste as a new layer - Position on the left and send to above the previous layer
Staying on that layer - Open Element 42 - Resize by 80 and move up slightly so you can see it
Open Element 19 - Resize by 30 - Sharpen More and position on the left arm of the chair
Open Element 2 and paste as a new layer - Resize by 40 - Sharpen and position on the bottom left of the tag
Open Element 52 - Position this below the sofa layer
Open Element 119 and paste as a new layer - Image - Flip and position above the previous layer

Open Paper 1 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Dark Angel - PTU

 

 I am using the art of Ninaste which you can find HERE
I am using the PTU Scrapkit Angeline 1 made to match the tube by Tiny Turtle Designs which you can get HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 128, 128, 128, 134

Open a new image 600x600
Open Element 120 and paste as a new layer
Resize by 85 - Sharpen and position in the centre
Open Element 4 and paste as a new layer
Resize by 60 - Sharpen and position below the red frame
Click inside the black frame with your magic wand
Selections - Modify - Expand by 5
Open Paper 33 and paste as a new layer
Open your close up tube and position
Selections - Invert - Delete - Select None and move both the paper and tube layer under the frame
Change the blend mode of the tube to Luminance L
Open Element 2 and paste as a new layer
Resize by 50 - Sharpen and position on the bottom right
Open your tube and paste as a new layer - Resize if necessary and position on the right
Click on the frame layer - Open Element 115 and paste as a new layer - Send to the bottom
Open Element 90 - Resize by 40 - Sharpen and position on the bottom left
Open Element 42 - Resize by 30 and then by 70 - Sharpen and position on the left of the frame
Click on the frame layer - Open Element 72 - Resize by 60 - Sharpen and position on the top left of the frame
Duplicate - Image - Mirror and merge down
Click on the frame layer - Open Element 44 - Resize by 80 - Sharpen and position in the top centre
See my tag for placement ideas
Keeping on the same layer - Open Element 32 - Resize by 40 and sharpen - Position next to the cake layers
Apply Radiance to your tube layer at the settings above

Open Paper 26 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Kawaii Love - PTU

 

 I am using the art of Ninaste which you can find HERE
I am using the PTU Scrapkit Kawaii Cutie made to match the tube by Tiny Turtle Designs which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 49, 124, 112, 67

Open a new image 600x600
Open Element 157 and paste as a new layer - Resize by 70 - Sharpen and position in the centre
Click inside with your magic wand - Selections - Modify - Expand by 5
Open Paper 8 and paste as a new layer
Position in the frame and open a close up of your tube
Selections - Invert - Delete - Select None on both layers - Move under the frame and change the blend mode of the tube to Luminance L  
Open Element 161 and paste as a new layer - Send to the bottom
Open Element 153 and paste as a new layer
Resize by 60 - Sharpen and position on the bottom of the frame
Open Element 152 and paste as a new layer
Resize by 30 - Sharpen and position on the top centre of the frame
Duplicate and position on the left - Merge down
Open Element 137 and paste as a new layer - Resize by 20 - Sharpen
Position in between the 2 ribbon layers
Open Element 160 - Image - Mirror - Send to the bottom
Open Element 33 and paste as a new layer
Resize by 40 and then by 80 - Sharpen - Position on the bottom right of the frame
Open Element 107 and paste as a new layer - Resize by 40 - Sharpen and position next to the previous layer
Open Element 11 and paste - Resize by 30 - Sharpen and position next to the previous layer
Open your tube and paste as a new layer - Resize if necessary and position on the right
Apply Radiance at the settings above

Open Paper 7 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

'Blanche's Dream' FTU Cluster

 

 I have a new FTU Cluster made using Tiny Turtle Designs Blanches Dream PTU Scrapkit which you can find HERE

The link to grab the cluster is HERE

Looking forward to seeing  what you create with it!

Blanche's Dream - PTU

 

 I am using the art of Skyscraps which you can find HERE
I am using the PTU Scrapkit Blanche's Dream made to match the tube by Tiny Turtle Designs and you can find it HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Fritillary - Default

Open a new image 600x600
Open Element 67 and paste as a new layer
Resize by 70 - Sharpen - Position in the centre
Click inside the centre with your magic wand
Selections - Modify - Expand by 5
Open Paper 33 - Resize by 70 - Paste as a new layer
Selections - Invert - Delete - Select None and move under the frame
Apply Fritillary to the paper layer at the settings above
Open Element 56 - Image - Mirror - Image - Resize by 30 - Sharpen and position on the top right
Open Element 55 - Repeat as before and position just under the previous ribbon layer
Open Element 9 and paste as a new layer
Resize by 60 - Sharpen and position to the right - Duplicate - Image - Mirror - Merge Down
Open Element 143 and paste as a new layer - Resize by 60 -Sharpen and position to the left of the frame
Move up towards the top of the frame
Open Element 92 and paste as a new layer - Resize by 70 - Sharpen and position to the bottom of the frame
Open Element 58 and paste as a new layer - Resize by 30 - Sharpen and position on the bottom left of the frame
Open your tube and paste as a new layer - Resize if necessary - Position in the centre of the frame and move under the white flower layer
Click on the paper layer and open Element 5 - Paste as a new layer and resize by 60 - Sharpen
Open Element 86 and paste as a new layer - Position - See my tag for placement idea's
Open Element 74 and paste as a new layer - Send to the bottom right - Duplicate - Image - Mirror and merge down
Open Element 47 and paste - Position behind the previous tree layer
Click on the frame layer - Open Element 44 and paste as a new layer
Resize by 70 - Sharpen and position on the right of the frame

Open Paper 1 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Love of Teal - PTU

 

 I am using the art of Pandora Creations which you can find HERE 

This tube is called Ada
I am using the PTU Scrapkit Teal Fantasy by Tiny Turtle Designs and you can find this HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 34 and paste as a new layer
Resize by 90 - Image - Rotate - Free Rotate 90 Left
Position in the centre
Click inside with your magic wand
Selections - Modify - Expand by 4
Open Paper 11 and paste as a new layer - Selections - Invert - Delete and move under the frame
Open Element 45 and paste as a new layer - Resize by 60 - Sharpen - Image - Mirror
Position on the left of the frame - Duplicate - Image - Flip and position on the bottom right of the canvas - Not the frame
See my tag for placement and merge down when happy
Open your tube as a new layer and paste as a new layer
Resize if necessary and position on the right of the tag - Move under the flower layer and erase any of the legs you can see from the bottom
Open Element 23 and paste as a new layer - Resize by 50 - Sharpen and position on the bottom left of the frame
Open Element 11 and paste as a new layer - Resize by 40 - Sharpen and position next to the previous layer - Move under the previous layer
Click on the paper layer - Open Element 15 and paste as a new layer - I colorised mine to match my tube - Resize by 80 - Sharpen and position in the centre - Sharpen More
Open Element 98 and paste as a new layer - Resize by 30 - Sharpen More and position on the top left of the flowers
Click on the paper layer - Open Element 63 and paste as a new layer - Resize by 70 - Sharpen
Position on the left - Duplicate and position next to it - Merge Down when happy
Open Element 76 and resize by 90 - Image - Mirror - Click on the paper layer and position on the bottom left
Open Element 31 and paste as a new layer - Send to the bottom

Open Paper 30 and paste as a new layer  - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Guns and Roses - PTU

 

 I am using the art of Ninaste which you can find HERE
I am using the PTU Scrapkit Guns and Roses Matching Kit 1 by Tiny Turtle Designs which was made to match the tube and you can find this HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 130 and paste as a new layer - Position in the centre
Open your main tube as a new layer and resize if necessary
Position in the bottom frame - When happy - Duplicate and hide for now
Click inside the bottom frame with your magic wand
Selections - Modify - Expand by 5
Open Paper 16 and paste as a new layer
Selections - Invert - Delete on both the tube and paper layers - Select None and move under the frame
Unhide the duplicated tube and erase the bottom overhanging parts
Click inside the other frame with your magic wand
Expand as before and paste paper 34 as a new layer
Open a close up of your tube and position
Selections - Invert - Delete - Select None and move both under the frame
Change the blend mode of the tube to Hard Light
Open Element 158 and paste as a new layer - Resize by 90 and send to the bottom
Open Element 87 - Resize by 60 - Sharpen - Position on the top frame and move under the tube
Open Element76 - Image - Mirror - Resize by 60 - Sharpen
Position on the bottom frame - Moving under the tube
See my tag for placement
Staying on the frame layer - Open Element 63 - Resize by 50 - Sharpen and position in the centre of the frames
Using your deform tool - Angle it to the left a little
Open Element 56 and paste as a new layer - Resize by 30 - Sharpen and position on the top frame
Open Element 105 and paste as a new layer - Resize by 95 and send to the bottom
Open Element 105 - Resize by 40 and then by 60 - Sharpen - Position on the top of the frame
Open Element 163 and paste - Resize by 70 - Sharpen and send to the bottom
Click on the frame layer - Open LM Element 55 and paste as a new layer
Position towards the top

Open Paper 1 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Spring Friend - PTU

 

 I am using the art of Zlata_M which you can find HERE
I am using the PTU Scrapkit Spring Time Friends by Tiny Turtle Designs and you can find that HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 38 and paste as a new layer - Resize by 80 - Sharpen
Position in the centre - Click inside with your magic wand
Selections - Modify - Expand by 20 - Open Paper 12 and paste as a new layer
Open your close up tube and paste as a new layer
Position - Selections - Invert - Delete - Select None and move both the paper and tube under the frame
Change the blend mode of the tube to Overlay
Open Element 37 - Paste as a new layer and resize by 80 - Sharpen
Position at the bottom - Duplicate - Image - Mirror - Merge Down
Duplicate - Image - Flip - Position under the original - Merge Down all these green layers
Open your tube and paste as a new layer - Resize if necessary and position at the bottom
Open Element 33 and paste as a new layer - Resize by 30 - Sharpen
Position on the right and send under the tube
Open Element 43 and paste as a new layer - Resize by 40 - Sharpen and position on the top right of the frame
Open Element 9 and paste as a new layer - Resize by 80 - Sharpen
Position under the tube layer - See my tag for placement
Open Element 27 and paste as a new layer - Resize by 80 - Sharpen
Position to the left - Duplicate - Image - Mirror and merge down - Send to the bottom
Open Element 23 - Resize by 30 - Sharpen - Position next to the cat under the tube
Open Element 61 and paste as a new layer - Resize by 90 - Position on the frame layer to the left
Duplicate - Image - Mirror and merge down when happy

Open Paper 4 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Don

Black Star Blue - PTU

 

I am using the art of Ninaste which you can find HERE
I am using the PTU Scrapkit Black Star Matching Kit by Tiny Turtle Designs which can be found HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 131 and paste as a new layer - Resize by 90 and position in the centre
Colorise this to match the tube you are using
I used Hue and Saturation both 174
Click inside the frames with your magic wand
Selections - Modify - Expand by 5
Open Paper 16 and Colorise - I used the same settings as before
Paste as a new layer and open your close up tube
Position in the top frame - Image - Mirror and position in the bottom
Selections - Invert - Delete - Select None on both the tube and paper layers
Move both under the frame and change the blend mode of the tube layers to Hard Light - Merge the tube layers together
Open Element 125 - Resize by 80 - Sharpen - Send to the bottom
Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 48 and paste as a new layer
Position and when happy - Selections - Invert - Delete - Select None and move under the frame
Open Element 138 and paste as a new layer - Resize by 20 and then by 80 - Sharpen More
Position on the dotty frame - Duplicate and position next to it - Merge Down
Duplicate and position on the bottom bit of the dotty frame - Merge these layers together
Open Element 56 - Resize by 90 - Send to the bottom and position to the left
Duplicate and position to the right - Merge Down
Open Element 2 and paste as a new layer - Position on the top frame - Duplicate and position next to the original
Duplicate twice more and position on the right frame - Merge all 4 skulls together
Open Element 22 and paste as a new layer - Resize by 70 - Sharpen
Position above the skulls on the top frame - Duplicate and place next to the skulls on the right frame
See my tag for placements
Open your main tube and paste as a new layer - Position in the centre of the circle frames


Open Paper 33 and paste as a new layer - I colorised mine as before to match my tag - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Emo Kitty - PTU

I am using the art of Pandora Creations which you can find HERE - This tube is called Katya
She is having a moving in sale where ALL tubes are $1 until the 14th April - Go grab them!!
I am using the PTU Scrapkit Punker Kitty by Tiny Turtle Designs and you can find that HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 128, 109, 158, 106

Open a new image 600x600
Open Element 44 and paste as a new layer - Resize by 90 - Sharpen - Position in the centre towards the top
Click inside the frame with your magic wand
Selections - Modify - Expand by 5
Open Paper 14 and paste as a new layer
Open your close up tube and paste as a new layer - Position in the frame
When happy - Selections - Invert - Delete - Select None on both layers
Move both the tube and paper layer under the frame
Open your main tube and paste as a new layer
Position on the left of the frame
Open Element 8 and paste as a new layer - Resize by 40 - Sharpen
Position on the right of the frame
Open Element 29 and paste as a new layer - Resize by 30 - Sharpen and position in the top centre of the frame
Open Element 6 and paste as a new layer - Resize by 30 and then by 80 - Sharpen
Position next to the white bow on the right hand side
Open Element 5 - Repeat the above steps and position next to the pink heart
Merge these together - Duplicate - Image - Mirror and merge Down - Move under the white bow layer
Open Element 67 - Paste as a new layer and resize by 40 - Sharpen - Position on the left of the frame
Open Element 72 - Resize by 60 - Sharpen - Position in front of the previous layer
Open Element 21 and paste - Resize by 50 - Sharpen
Position this below the previous layer
Open Element 39 - Repeat the above steps and position under the previous layer
See my tag for placement ideas
Open Element 63 - Send to the bottom and place to the left
Duplicate - Image - Mirror - Merge Down
Open your full size tube and paste as a new layer
Position on the left and apply Radiance at the settings above

Open Paper 2 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge down
Save as a png - Add your name - Save again - Done

Easter Candy - PTU

I am using the art of Ninaste which you can find HERE
I am using the PTU Scrapkit Candy made to match the tube by Tiny Turtle Designs which you can find HEREMask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 185, 121, 170, 118

Open a new image 600x600
Open Element 144 and paste as a new layer
Resize by 70 and Sharpen - Position in the centre
Click inside with your magic wand
Selections - Modify - Expand by 5
Open Paper 7 and paste as a new layer
Open your tube and paste as a new layer
Duplicate and hide for now
Selections - Invert - Delete - Select None - Move under the frame
Unhide the duplicated tube and erase the overhanging parts of the tube
Crop your image to size
Open Element 14 and paste as a new layer - Resize by 40 - Sharpen and position on the top right of the frame
Duplicate - Resize by 80 - Sharpen and place beneath the original - Merge Down
Duplicate and position on the bottom left of the frame - Merge Down
Open Element 23 and paste as a new layer - Resize by 70 - Sharpen and position on the left - Duplicate - Image - Mirror - Place on the right - Merge Down and send to the bottom
Click on the paper layer - Open Element 118 and paste as a new layer - Resize by 50 - Sharpen and position on the bottom left of the frame
Open Element 42 - Resize by 80 - Sharpen and position on the bottom right of the frame
Open Element 80 - Resize by 90 - Sharpen and position over the paper layer - Erase the bottom part that overhangs
Open Element 53 and paste as a new layer - Resize by 80 - Sharpen and position on the left side of the frame that is still showing - Duplicate and Mirror - Position on the top right of the frame that still shows - Merge down
Click on the frame again - Open Element 113 - Resize by 70 - Sharpen
Position on the top left of the frame - Duplicate and position next to it - Merge Down
Apply Radiance to the tube layers at the settings above

Open Paper 1 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done