Friday, 30 May 2014

Siren - PTU

I am using the art of Barbara Jensen which you can find HERE
I am using the PTU Scrapkit Passing Time by Imperfect Angel Scraps which you can find HERE
This is only available for today as she is retiring at midnight on the 31st May so go and get it!
Font of Choice

Open a new Image 600x600
Open Frame 9 - Resize by 80 - Sharpen and place in the centre - Click inside with your  magic wand - Selections - Modify - Expand by 5 - Open Paper 7 and paste as a new layer - Open Element 77 - Resize by 70 - Sharpen and place on the left - duplicate and position to the right - Selections - Invert - Delete - Select none and move under the frame
Open Frame 2 - Resize by 60 - Sharpen and position on the left of the frame - Move underneath - Duplicate and move to the top - Position on the right
Open Element 17 - Resize by 70 - Sharpen and place on the top left
Open Element 43 - Resize by 60 - Sharpen and place on the top left - duplicate - image - mirror and merge down - Open Element 18 - Resize by 80 and repeat the above steps
Open Element 8 - Resize by 60 - Sharpen and place on the bottom left - duplicate twice and position on the right of each other - merge down
Open Element 3 and paste as a new layer - Resize by 80 and place toward the top
Open Element 68 - resize by 45 - Sharpen and as before with the red flowers - repeat the steps but this time duplicate by 3
Open your tube and place her toward the bottom

Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Precious - PTU

I am using the art of Dirk Richter which you can find HERE
I am using the PTU IB Dirk Richter8-2 Scrapkit by Ladyhawwk Designs which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 128, 188, 128, 124

Open a new image 600x600
Open Frame 1 - Resize by 60 - Sharpen and place in the centre - Open Element 6 and position on the top centre of the frame - Open Element 13 - Resize by 70 - Sharpen and place along the bottom of the frame - Open Element 8 - Resize by 80 - Sharpen and place on the previous layer
Open Element 28 - Resize by 60 - Sharpen and place on the right of the canvas - Duplicate - Image - mirror and merge down - Open Element 1- Resize by 60 - Sharpen and place in the centre - Click inside all the frames with your magic wand - Selections - modify - Expand by 5 and open paper 1 and paste as a new layer - Selections - Invert - Delete - Select none and move under the frame - Open Element 18 and paste as a new layer - Resize by 70 - Sharpen and position toward the top - Open Element 27 - Resize by 50 - Sharpen and place on the top right - Duplicate - Image - Mirror and merge down
Open Element 14 - Resize by 70 - Sharpen and place on the right - Open Element 9 - Repeat the above steps and place in the centre of the previous layer
Open Element 4 - Resize by 60 - Sharpen and place toward the bottom centre - Open Element 7 - Resize by 80 - Sharpen and place on the top right of the window frame - Duplicate - Image - Mirror and merge down - Open Element 23 - Resize by 35 - Sharpen and position on the right centre - Open Element 25 and position on the bottom right
Open Element 16 - Resize by 50 - Sharpen and place on the bottom left - Duplicate - Image - Mirror - Merge Down - Open Element 3- Resize by 40 - Sharpen and place on the bottom left
Open Element 5 - Resize by 60 - Sharpen and place on the right centre - Duplicate - Image - Mirror and place on the top left - Open Element 19 - Resize by 65 - Sharpen and place on the top right - Duplicate - Image - Mirror and position on the bottom left - merge down
Open your tube and position her to the left of the tag - Apply Radiance at the settings above
Open Element 2 - Resize by 35 - Sharpen and place on the bottom right of the tube

Open Paper 2 Paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done


Show Off Tag for Ginnibug Designs


New show off tag from myself using the tube Andrea by Trinita and the PTU Scrapkit Elegance by Ginnibug Designz


Show off Tag for Abstract!

New Show Off Tag using the gorgeous tube Angie by Verymany and Abstract Creations Beauty Within PTU Scrapkit


New kit from PBDesigns!



Brand New Scrapkit by PBDesigns called Cinco De Mayo, this kit is now on Sale!! 45% Off until Tuesday 3rd June!!

http://www.scrappybee.com/beehive/index.php?main_page=product_info&cPath=1_90&products_id=677#.U4hSmPldXfI


You can buy the bundle - which consists of the brand new kit Cinco De Mayo, the Birthday Add On and the Funbits Add On - this will be $6.25 for as long as the bundle is available! If you bought all the above seperately it would cost $11.25 so you are saving yourself a lot of dollars if you buy the bundle!! - 

http://www.scrappybee.com/beehive/index.php?main_page=product_info&cPath=1_90&products_id=679&zenid=2c100d3ab31e08d8e64780f19d6181a9#.U4hSCPldXfI

Thursday, 29 May 2014

Bashful - PTU

I am using the art of Barbara Jensen which you can find HERE
I am using the PTU Scrapkit Ladies Day by Devilish Dezines which you can find HERE
Font of Choice

Open a new image 600x600
Open Element 22 - Resize by 70 - Sharpen and place to the left - Duplicate - Image - Mirror and Merge Down - Open Element 17 - Resize by 80 - Sharpen and place in the centre - Duplicate and position below the original - merge down
Open Element 3 - Resize by 60 - Sharpen and place in the centre - Open Element 34 and paste as a new layer - Resize by 60 - Sharpen and place to the top of the previous layer
Open Element 25 - Resize by 85 - Sharpen and place on the left - Duplicate - Image - Mirror and merge down - Open Element 10 - Resize by 80 - Sharpen and place on the bottom
Open your tube and place her in the centre
Open Element 33 - Resize by 70 - Sharpen and place on the bottom of the tube
Open Element 12 - Resize by 70 - Sharpen and place on the bottom left - Duplicate - Image - Mirror and merge down - Open Element 47 - Flip and resize by 50 - Sharpen and place to the right - Duplicate and mirror - merge down
Open Element 23 - Resize by 35 - Sharpen and place on the right of the far left grass - duplicate - Image - Mirror and merge down

Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Evil - PTU

I am using the art of Spazz which you can find HERE
I am using the PTU Matching Scrapkit Cursed by Drama Bomb Design Designs which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Eye Candy - Gradient Glow - Fat - White and Black

Open a new image 600x600
Open Element 94 and paste as a new layer - Resize by 80 - Sharpan and place in the centre
Open Element 92 - Mirror and resize by 70 - Place on the top right
Open Element 31 - Resize by 70 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open paper 17 and paste as a new layer - Open Element 86 - Resize by 50 - Sharpen and place on the top right - Open Element 82 and paste as a new layer - Resize by 60 - Sharpen and place in the centre - Selections - Invert - Delete - Select none and move under the frame - Apply Gradient Glow at the settings above to the frame - Open Element 66 - Resize by 60 - Sharpen and place on the far left - Duplicate and position on the bottom right - merge down
Open Element 24 - Resize by 70 - Sharpen and place on the far left - Open Element 59 - Resize by 80 - Sharpen and place over the previous layer
Open Element 29 - mirror - Resize by 40 - Sharpen and place on the bottom left
Open Element 18 - Resize by 80 and place on the bottom - Open Element 71 - Resize by 70 - Sharpen and place in the centre of the path
Open Element 19 - Resize by 45 - Sharpen and place on the bottom right - Duplicate - Mirror and place on the left of the original - merge down
Open element 64 - Resize by 60 - Sharpen and place on the bottom right
Open Element 33 - Resize by 60 - Sharpen and place on the bottom right
Open Element 51 - Resize by 70 - Sharpen and place on the top centre of the frame
Open Element 32 - mirror - resize by 90 - sharpen and place on the top
Open your tube and position her to the left

Open Paper 4 - Paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done


Special - PTU


I am using the art of Amy Matthews which you can find HERE
I am using the PTU IB Amy Matthews 40-1 Scrapkit by Foxys Designz which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Eye Candy - Gradient Glow - Fat - White and Blue
Xero - Radiance - 79, 161, 143, 124

Open a new image 600x600
Open Element 8 and paste as a new layer - Resize by 80 - Sharpen and place in the centre
Open Frame 2 - Image - Rotate - Free Rotate - 90 Left - Resize by 70 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - open Paper 4 - resize by 60 and place in the centre - Open your tube and position - Duplicate and hide for now - Selections - Invert - Delete - Select none and move both under the frame
Open Element 2 - Resize by 70 - Sharpen and place on the top right of the frame
Open Element 15 - Image - Flip - Position on the top of the frame
Open Element 12 - Resize by 50 - Sharpen and place on the top right of the frame - Duplicate - Image - Mirror and merge down - Open Element 10 and paste as a new layer on the bottom of the frame - Open Element 19 - Resize by 70 - Sharpen and place on the left of the frame - Duplicate - Image - Mirror - Merge down
Open Element 13 - Resize by 60 - Sharpen and place on the bottom left
Open Element 4 - Resize by 45 - Sharpen and place on the bottom left - Duplicate - Resize by 70 - Sharpen and place on the bottom centre of the frame - Duplicate and merge down
Open Element 14 - Resize by 60 - Sharpen and place on the bottom right - open element 9 - Resize by 70 - Sharpen and place on the envelope - Open Element 1 - resize by 50 - Sharpen and place on the bottom right - Duplicate and as before resize and place on the right of the centre flower - Open Element 17 - Resize by 70 - Sharpen and place on the bottom
Open Wordart 1 - Resize by 70 - Sharpen and place on the bottom - Apply Gradient glow at the settings above - Unhide your duplicated tube and place to the top - Erase the bottom of the tube - Apply radiance to the tube layers at the settings above

Open Paper 5 - Paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Wednesday, 28 May 2014

Sea Woman - PTU

I am using the art of Trinita which you can find HERE
I am using the PTU Scrapkit Mermaid Treasures by Jackie's Jewel's which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Fritillary - Default
Eye Candy - Gradient Glow - Default and Purple as the colour

Open a new image 600x600
Open Frame 4 and paste as a new layer - Place in the centre and resize by 80 - Sharpen - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 9 and paste as a new layer - Selections - Invert - Delete - Select none and move under the frame
Open Frame 3 - Resize by 90 and place in the centre - Click inside both frames with your magic wand - Selections - Modify - Expand by 5 - Open Paper 1 and paste as a new layer - Open your close up tube and position in the left frame - When happy - Selections - Invert - Delete - Select none and move both under the frame - Apply Fritillary at the settings above to the paper
Open Coral 1 and place on the far left of the frame - Duplicate and place in the middle - Duplicate again and position on the far right - merge all 3 together
Open Bubbles 1 and paste as a new layer - Resize by 70 - Sharpen and place in the centre
Open Sea Animal and place in the centre of the right frame - Apply Gradient Glow at the settings above - Open Wave and place on the bottom right - Open Mesh and place along the bottom - Open Flowers and place on the bottom left - Duplicate and position next to the original - Open Rock - Resize by 80 - Sharpen and place on the bottom right
Open Dolphin and place on the top right
Open your tube and place her on the rock - Open Urchins - Resize by 80 - Sharpen and place on the bottom right - Open Sea Snail Shell 1 - Resize by 60 - Place on the left of the previous layer

Open Paper 6 - Image - Flip - Paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done


Tuesday, 27 May 2014

Eternal Love - PTU

I am using the art of Enamorte which you can find HERE
I am using the PTU IB Enamorte 22-3 by Rebel Dezigns which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Eye Candy - Gradient Glow - Fat - White and Black

Open a new image 600x600
Open Frame 1 and paste as a new layer - Resize by 80 and Sharpen - Position toward the top - Duplicate - Image - Flip and Merge down
Open Frame 2 - Resize by 60 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 5 and paste as a new layer - Selections - Invert - Delete - Select none and move under the frame
Open Element 17 and place along the bottom of the tag
Open Element 11 - Resize by 65 - Sharpen and place on the top left of the frame - Duplicate - Image - Mirror and merge down when happy
Open Element 2 - Resize by 60 - Sharpen and position on the far right of the tag
Open Element 12 and paste as a new layer on the bottom of the canvas
Open Element 9 - Resize by 85 - Sharpen and place just below centre
Open Element 8 and place on the far right of the tag - Duplicate - Image - Mirror - Merge down
Open Element 7 - Resize by 65 - Sharpen and place on the bottom right
Open your tube and position in the centre - I colorised mine - Hue and Sat 0 to match the kit
Open Element 5 - Resize by 70 - Sharpen and place on the bottom of the tube
Open wa - Resize by 70 - Sharpen and place on the bottom - Apply Gradient Glow at the settings above

Open Paper 3 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done


2 More Show Off Tags!



2 More tags using the 2nd Cluster in the pack - 1st i used the art of Dirk Richter and in the 2nd, the artwork of Anna Marine - You can find the cluster pack HERE

Show off Tags using Hungry Hill's Cluster Pack 4

 



Above are 2 tags i have used using Alison's Cluster Pack 4 - This is the 1st cluster in the pack, i have used the art of Anna Liwanag in the first cluster and left it how it was and in the 2nd, i have used the art of Enys Guerrero and colorised and moved various elements around

You can find the Pack HERE

Silent Chaos - PTU

I am using the art of Mayumi Ogihara which you can find HERE
I am using the PTU Scrapkit Through the Chaos by WDDesignz which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 128, 67, 131, 121

Open a new image 600x600
Open Element 28 and paste as a new layer - Resize by 60 - Sharpen and position on the right centre - Duplicate - Image - Mirror and merge down
Open Element 66 - Resize as before and repeat the above steps
Open Frame 5 and paste as a new layer - Resize by 60 - Sharpen and place in the centre - Click inside with your magic wand - Selections - modify - expand by 5 - Open your tube and place in the frame - Selections - Invert - Delete - Select none and move under the frame - Apply Radiance at the settings above - Open Element 53 - Resize by 60 - Sharpen and place on the top of the frame - Open Element 13 - Rotate by 45 Left - Resize by 60 - Sharpen and place on the bottom left - Duplicate - Image - Flip - Mirror and merge down
Open Frame 6 - Resize by 55 - Sharpen and place in the centre
Open Element 12 - Rotate by 45 Right and resize by 70 - Sharpen and place on the top
Open Element 41 and paste as a new layer - Resize by 55 - Sharpen and place on the top left - Duplicate - Image - Mirror and merge down
Open Element 27 - Resize by 45 - Sharpen and place on the top right - duplicate - image - mirror and merge down - Open Element 26 - Repeat the above steps
Open Element 30 - Resize by 50 - Sharpen and place on the bottom right - Duplicate - Image - Mirror and merge down - Open Element 68 and paste as a new layer - Resize by 80 - Sharpen and place on the top of the frame
Open Element 9 and place on the bottom of the frame - Open Element 5 - resize by 70 - Sharpen - Place on the right - Duplicate - image - mirror and merge down
Open Element 37 - Resize by 45 - Sharpen and repeat the above steps
Open Element 23 and paste as a new layer - Resize by 50 - Sharpen and place on the bottom right - Open Element 36 - resize by 35 - Sharpen and place on the bottom left - duplicate - image - mirror and merge down

Open Paper 11 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done


Sunday, 25 May 2014

Sweet Lingerie - PTU

I am using the art of Jennifer Janesko which you can find HERE
I am using the PTU IB Jennifer Janesko 33-1 Scrapkit by WDDesignz which you can find HERE
Mask of Choice
Font of Choice


Open a new image 600x600
Open Element 21 and paste as a new layer positioning in the centre
Open Element 12 - Resize by 80 and place in the centre
Open Element 4 - Resize by 70 and place in the centre - Click inside the far windows and the centre of the frame - Selections - Modify - Expand by 5 - Open Paper 2 and paste as a new layer - Selections - Invert - Delete - Select none and move under the frame
Open Element 13 - Resize by 60 and place on the far right - Duplicate - Image - Mirror - merge down - Open Element 6 - Resize by 55 - Sharpen and place on the top centre
Open Element 27 and position on the top right of the window frame - Duplicate - Mirror and merge down - Erase the parts that stick out from the bottom
Open Element 40 and paste as a new layer positioning in the centre
Open Element 46 - Resize by 50 - Sharpen and place in the centre - open element 45 and repeat the above steps - Open Element 39 and paste as a new layer - Resize by 75 - Sharpen and place on the top left - Duplicate - Mirror and Merge Down
Open Element 44 - Resize by 60 - Sharpen and place on the right - Duplicate - Mirror - merge down - Open Element 34 - Resize by 70 - Sharpen and position toward the top
Open Element 29 - Resize by 80 - Sharpen and place towards the top of the frames
Open Element 42 - Resize by 60 - Sharpen and place in the middle
Open your tube and place her in the middle of the frames - Open Element 3 - Flip - Rotate by 90 Left and place on the bottom of the tube - Resize by 50 - Sharpen and erase the bottom part of the tube thats underneath the ribbon
Open Element 20 - Mirror - Resize by 60 - Sharpen and place on the bottom left
Open Element 22 - Flip - Resize by 45 - SHarpen and place on the bottom right - Duplicate - Resize by 80 - Sharpen and position on the left of the previous layer - merge down
Open ELement 38 - Position on the bottom left - Erase everything thats underneath the hole in the key - Open Element 1 - Resize by 70 - Sharpen and position toward the bottom

Open Paper 5 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Saturday, 24 May 2014

Enchanting - PTU

I am using the art of Enamorte which you can find HERE
I am using the PTU IB Enamorte 24-1 by Foxy's Designz which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 158, 225, 194, 118
Xero - Clarity - Default
Eye Candy - Gradient Glow - Fat - White and Light Purple

Open a new image 600x600
Open Frame 1 and paste as a new layer - Resize by 70 and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 5 and paste as a new layer - Open Element 17 - Rotate - 90 Right and paste as a new layer - Selections - Invert - Delete - Select none and move all under the frame
Open Element 11 and paste as a new layer on the bottom of the frame - Duplicate - Image - Flip and merge down - Open Element 2 - mirror - Resize by 50 - Sharpen and place on the top right - Open Element 16 - Resize by 45 - Sharpen and place on the top left
Open Element 3 and position on the bottom left of the frame
Open Element 12 - Position on the top left - Duplicate and mirror and place on the bottom right - merge down - Open Element 10 - Image - Flip and position on the top
Open Element 14 and paste as a new layer - Open Element 20 - Place toward the bottom - Duplicate - Flip and position toward the top - merge down
Open your tube and place her in the centre - Apply Radiance and then Clarity at the settings above - Open Element 5 - Resize by 35 - Sharpen and place on the bottom right - Duplicate - Image - Mirror and merge down - Open Element 8 and place on the bottom left
Open Element 19 and paste as a new layer - Resize by 70 - Sharpen and place on the bottom right - Open Wordart 1 and paste as a new layer - Resize by 85 - Sharpen and position along the bottom - Apply Gradient Glow at the settings above

Open Paper 2 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done




Friday, 23 May 2014

Nothing's Impossible - PTU

I am using the art of PinUpToons which you can find HERE
I am using the PTU IB PinUpToons 180-1 Scrapkit by WDDesignz which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 128, 97, 128, 109
Eye Candy - Gradient Glow - Fat - White and Red

Open a new image 600x600
Open Element 5 and paste as a new layer - Rotate by 90 - left and place in the centre
Open Element 6 - Resize by 80 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 2 and paste as a new layer - Selections - Invert - Delete - Select none and move under the frame
Open Element 26 - Image - Flip - Resize by 70 - Sharpen and place on the bottom
Open Element 18 - Resize by 60 - Sharpen and place in the centre
Open Element 7 - Resize by 70 - Sharpen and place towards the bottom right
Open Element 25 - Resize by 40 - Sharpen and place to the bottom left - Erase any that sticks out from the frame - Duplicate and repeat on the right side - Merge down
Open Element 13 - Resize by 35 - Sharpen and position on the top right - Duplicate and move to the left so they are matching - merge down - Duplicate twice and position in the centre and to the bottom - merge all 3 together
Open Element 10 - Resize by 35 - Sharpen and place on the top right - Duplicate - mirror - resize by 80 and position on the top left
Open your tube and position in the centre - Apply Radiance at the settings above
Open Element 23 - Resize by 85 - Sharpen and place along the bottom - Erase the bottom of the tube that sticks out from underneath the ribbon
Open Element 12 - Resize by 80 - Sharpen and place along the bottom - Apply Gradient Glow at the settings above

Open Paper 4 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done


Thursday, 22 May 2014

Lavender Beauty - PTU

I am using the art of Verymany which you can find HERE
I am using the PTU Scrapkit Lovely Lavender by PinkParadox Productions which you can find HERE
Font of Choice

Filters Used: 
Xero - Fritillary - Default

Open a new image 600x600
Open Element 97 - Resize by 80 - Sharpen and place along the bottom
Open Element 146 - Resize by 75 - Sharpen and place in the centre
Open Frame 5 - Resize by 70 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 4 and paste as a new layer - Open Element 95 - Resize by 60 - Sharpen and place toward the bottom of the frame - Selections - Invert - Delete - Select none and move under the frame - Apply Fritillary to the paper layer at the settings above - Keeping on the paper layer - Open Element 120 - Resize by 55 and place in the centre - Open Frame 6 - Resize by 45 - Sharpen and place in the centre
Open Element 74 - Resize by 60 - Sharpen and place along the top of the frame
Open Element 111 - Mirror - Resize by 50 - Sharpen and place on the right
Open Element 52 - Resize by 40 - Sharpen and place on the bottom right
Open Element 77 - Resize by 70 - Sharpen and place on the top left of the frame
Open Element 5- Resize by 15 - Sharpen More and place on the top left of the previous layer
Open Element 75 and paste as a new layer - Resize by 35 - Sharpen and place on the bottom right - Open your tube and place her in the centre of the tag
Open Element 94 - Resize by 50 - Sharpen and place on the bottom left - Duplicate and place on the bottom of the tube - Open Element 39 - Mirror - Resize by 80 - Sharpen and place on the bottom right - Open Element 144 - Resize by 70 and place along the bottom
Open Element 109 - Resize by 30 - Sharpen and place on the bottom left - Duplicate and place on the left of the original - merge down - Duplicate - Rotate - 90 Left and position on the left bottom of the frame - merge these 2 together
Open Element 8 - Resize by 15 - Sharpen more and position on the top left

Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done



Wednesday, 21 May 2014

Goth Griffith - PTU

I am using the art of Jasmine Beckett-Griffith which you can find HERE
This is a retired bonus tube
I am using the PTU IB Jasmine Beckett-Griffith 1-3 Scrapkit by Foxy's Designz which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 152, 97, 128, 149

Open a new image 600x600
Open Element 4 and paste as a new layer - Place in the centre
Open Frame 2 - Paste as a new layer - Resize by 80 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expan by 5 - Open Paper 3 and paste as a new layer - Selections - Invert - Delete - Select none and move under the frame
Open Element 16 and paste as a new layer on the top half of the frame
Open Element 6 - Resize by 35 - Sharpen and place on the top right of the frame - Duplicate - Image - Mirror and merge down
Open Frame 1 - Rotate by 90 Left - Place in the centre - Click inside as before and paste paper 6 into the frame - Selections - Invert - Delete - Select none
Open Wordart 1 - Resize by 70 - Sharpen and place on the top of the frame
Open Element 15 and paste as a new layer on the top right - Delete any that stick out the  bottom of the tag - Open Element 2 - Resize by 60 - Sharpen and place on the right - Duplicate - Image - Mirror and merge down - Open Element 11 - Resize by 60 - Sharpen and place on the far bottom right - Duplicate and place on the far left - merge down
Open Element 13 and place along the top of the graves
Open Element 9 - Resize by 50 - Sharpen and place along the bottom - Open Element 17 - Image - Flip and position on the bottom of the previous layer
Open Element 14 - Resize by 70 - Sharpen and place on the bottom of the tag
Open Element 18 - Resize by 40 - Sharpen and place on the far bottom left of the tag - Duplicate and Mirror - Duplicate again and resize by 80 - Position on the right of the first flower - Duplicate twice more and place next to each other and merge all down when happy
Open Element 19 - Resize by 25 - Sharpen and place on the bottom left - Duplicate - Mirror
Open Element 12 - Resize by 70 - Sharpen and place on the right - Duplicate - Image - Mirror
Open your tube and place in the centre - Apply Radiance at the settings above
Open Element 8 and paste as a new layer on the bottom right - Open Element 10 - Mirror - Resize by 45 - Sharpen and place on the bottom right

Open Paper 1 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Tuesday, 20 May 2014

Emo Blue - PTU

I am using the art of Ed Mironiuk which you can find HERE
I am using the PTU IB Ed Mironiuk 92-2 by BabyCakes Scraps which you can find HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 25 - Resize by 80 - Sharpen and place to the right
Open Element 26 - Resize by 60 - Sharpen and place to the right - Click inside with your magic wand - Selections - modify - expand by 5 and open Paper 4 - Paste as a new layer - Open your close up tube and position in the frame - Selections - Invert - Delete - Select none and move both under the frame - Change the blend mode of the tube to Hard Light
Open Element 13 - Resize by 70 - Sharpen and place on the top right of the frame - Duplicate - Image - Mirror and merge down
Open Element 5 and paste as a new layer - Position on the top left
Open Element 27 - Image - Mirror - Resize by 60 - Sharpen and place in the top centre
Open Element 17 - Resize by 75 - Sharpen and place on the top centre of the frame
Open Element 21 - Paste as a new layer and position on the bottom right
Open Element 8 - Resize by 65 - Sharpen and place on the left of the previous layer
Open Element 9 - Resize by 30 - Sharpen and place on the left of the previous layer
Open Element 20 - Mirror - Resize by 70 - Sharpen and place on the bottom right
Open Element 18 - Paste as a new layer and place on the bottom left
Open your tube and position her along the bottom of the tag

Open Paper 3 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Steam - PTU

I am using the art of Spazz which you can find HERE
I am using the PTU Scrapkit Steamy Elegance by Kissed by Kelz which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 216, 85, 128, 109

Open a new image 600x600
Open Element 114 - Resize by 80 - Sharpen and place on the bottom right - Duplicate - Image - Mirror and merge down
Open Element 116 - Resize by 70 - Sharpen and place on the top right - Duplicate - Image - Mirror and place on the far left - merge down
Open Element 53 - Resize by 70 - Sharpen and place on the bottom right
Open Element 70 - Resize by 60 - Sharpen and place in the centre - Click inside with the magic wand - Selections - Modify - Expand by 5 - Open Paper 7 and paste as a new layer - Open your close up tube and position in the right of the frame - Open Element 2 and place around her face - Selections - Invert - Delete - Select none and move all under the frame - Change the blend mode of the tube to Soft light and Duplicate - Change the blend mode of the silver frame to Luminance - Open Element 98 and place in the centre
Open Element 78 - Resize by 70 - Sharpen and place along the bottom
Open Element 76 - Resize by 50 - Sharpen and place on the right of the frame - Duplicate - Image - Mirror and merge down - Open Element 66 - Mirror and resize by 60 - Sharpen and place on the top right - Open Element 58 - Mirror and resize by 50 - Sharpen and place in the centre - Open Element 43 - Resize by 45 - Sharpen and place on the bottom right - Duplicate - resize by 80 - Sharpen and place on the bottom left of the original - Repeat the above steps and merge all 3 flowers together - Open Element 33 - Resize by 35 - Sharpen and place on the far centre right of the frame - Duplicate and position below the original
Open Element 106 - Resize by 60 - Sharpen and place on the top right
Open Element 102 - Resize by 45 - Sharpen and place on the top left
Open Element 28 - Resize by 50 - Sharpen and place on the bottom left - Open your tube and position her to the left - Apply Radiance at the settings above

Open Paper 29 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done


Sunday, 18 May 2014

The Companion - PTU

I am using the art of Regan Kubecek which you can find HERE
I am using the PTU Scrapkit Esmerelda by BlackWidow Creationz which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 128, 50, 128, 106
Eye Candy - Gradient Glow - Fat - White and Purple

Open a new image 600x600
Open Element 4 and paste as a new layer - Position along the bottom centre
Open Element 5 - Resize by 80 and paste as a new layer on the top - Duplicate - Image - Mirror and move to the bottom - merge down
Open Element 14 - Resize by 80 and place in the centre - Click inside with your magic wand - Selections - modify - expand by 5 and open paper 3 and paste as a new layer - Open your tube and position - when happy - duplicate and hide for now - Selections - Invert - Delete - Select none and move all under the frame
Open Element 23 - Paste as a new layer along the top of the frame
Open Element 11 - Resize by 85 and place in the centre - Open Element 20 and paste on the right of the frame - duplicate and move next to the original - merge down
Open Element 36 - Mirror and paste as a new layer on the top right - duplicate - image - flip - mirror and merge down
Open Element 38 - Mirror and resize by 60 - Sharpen and place on the far right
Open Element 32 and paste as a new layer to the top of the tag
Open Element 30 and paste as a new layer on the top left - Unhide your duplicated tube and move to the top erasing any parts that stick out from the other layers - Apply Radiance at the settings above to both tube layers
Open Element 34 and resize by 50 - Sharpen and place along the bottom of the goth frame
Open Element 28 - Resize by 70 - Sharpen and place on the bottom left - duplicate - image - mirror and merge down - Open Element 18 - Resize by 75 - Sharpen and place on the bottom - Apply Gradient Glow at the settings above

Open Paper 2 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done


Light Summer - PTU

I am using the art of Anna Liwanag which you can find HERE
I am using the PTU Scrapkit Come Summer Morning by Horseplays Pasture Designs which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 52, 103, 128, 82

Open a new image 600x600
Open Element 22 and paste as a new layer - Resize by 80 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 7 and paste as a new layer - Open your tube and position in the centre - Duplicate and hide for now - Selections - Invert - Delete and select none - Move under the frame
Open Element 11 and paste as a new layer - Position in the centre
Open Element 1 and paste as a new layer - position on the top left - duplicate - image - mirror - duplicate - image - flip and mirror and merge all 3 layers together
Open Element 49 - Resize by 80 and position along the top of the tag
Open Element 9 - Mirror - Resize by 80 and place on the bottom left
Open Element 34 - Image - flip and position on the bottom of the tag
Open Element2 - Mirror - Resize by 35 - Sharpen and place on the bottom right
Open Element 27 - Resize by 70 - Sharpen and place on the right of the frame - duplicate - image - mirror and merge down
Unhide your duplicated tube and move to the top - erase some that are overhanging 
Apply Radiance to both tube layers at the settings above

Open Paper 10 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Saturday, 17 May 2014

Steampunk Wonderland - PTU

I am using the art of Martin Abel which you can find HERE
I am using the PTU Scrapkit Steampunk Wonderland by PinkParadox Productions which you can find HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 118 and paste as a new layer - Resize by 45 - Sharpen and position on the bottom slightly to the right - Open Element 101 and paste as a new layer - Resize by 70 and place along the bottom - I colorised mine to match my tube
Open Element 129 - Image - Flip - Resize by 40 - Sharpen and place on the top right
Open Element 107 and paste as a new layer - Resize by 50 - Sharpen and place on the bottom right - Open Element 140 - Resize by 60 - Sharpen and place on the left
Open Element 88 and resize by 35 - Sharpen and position on the bottom left
Open Element 123 and paste as a new layer - Resize by 40 - Sharpen and place on the bottom left of the house - Open Element 91 - Resize by 80 - Mirror and place on the top left of the house - Open Element 11 - Resize by 70 and place on the bottom left
Open Element 110 - Resize by 55 - Sharpen and place on the top right
Open Element 119 - Mirror - Resize by 50 - Sharpen and place on the bottom right
Open your tube and paste as a new layer - Place on the left
Open Element 87 - Resize by 35 - Sharpen and position on the bottom right

Open Paper 9 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Friday, 16 May 2014

Serene - PTU

I am using the art of Zindy Nielson - This tube is a FTU and you can find her shop HERE
I am using the PTU Scrapkit Fairy Frolic by MellieBeans which you can find HERE
Font of Choice

Open a new image 600x600
Open Frame 2 and paste as a new layer - Resize by 90 and place toward the bottom
Open Frame 3 - Resize by 70 and postion towards the top of the previous frame - Click inside with your magic wand - Selections - modify - expand by 6 - Open paper 3 and paste as a new layer - Selections - invert - delete - select none and move under the frame
Open Element 1 and paste as a new layer - resize by 70 - sharpen and place on the top right - duplicate - position below the original - merge down - duplicate - image - mirror and merge down - Open Frame 1 and paste as a new layer - resize by 80 - sharpen and place in the centre - click inside with your magic wand - selections - modify - expand by 5 - open paper 5 and paste as a new layer - open your tube and position in the centre - selections - invert - delete - select none and move under the frame - Open element 21 - Resize by 60 - Sharpen and position below the paper - Open Element 17 and resize by 50 - Sharpen and place on the far right - duplicate - image - mirror and merge down
Open Element 13 - Resize by 60 - Sharpen and place on the right - Open Element 15 - Resize by 50 - Sharpen and position to the left
Open Element 9 - Resize by 45 - Sharpen and place on the bottom right - duplicate and position above the original - merge down - duplicate - mirror and merge down
Open Element 18 - Resize by 55 - Sharpen and place on the bottom right - duplicate - image - mirror - merge down - Open Element 22 and paste as a new layer - resize by 60 - Sharpen and place on the right of the frame - duplicate and move below the original - merge down - duplicate - image - mirror and merge down
Open Element 7 - Resize by 60 - Sharpen and place along the bottom - Open Element 8 and paste as a new layer - Resize  by 40 - Sharpen and place on the far right - duplicate - resize by 80 - sharpen and place on the left of the previous layer - merge down and as before - duplicate - image - mirror and merge down
Open wa2 and paste as a new layer - Resize by 60 - Sharpen and place along the bottom - apply gradient glow at the settings above - Open Element 12 and resize by 45 - Sharpen and place her on the mushrooms so it looks as if she is sitting on them in the tubes eye view

Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Wednesday, 14 May 2014

Owl Lady - PTU

I am using the art of Alfadesire which you can find HERE
I am using the PTU Scrapkit Hoot Hoot by PO Concept which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Eye Candy - Gradient Glow - Fat - White and Dark Blue

Open a new image 600x600
Open Element 78 and place in the centre of your tag
Open Element 59 - Resize by 80 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 4 - Open Paper 7 and paste as a new layer - Open Element 100 and paste as a new layer - Resize by 80 and position on the right of the frame - Open Element 58 and place toward the top - Selections - Invert - Delete - Select none and move all underneath the frame
Open Element 47 and paste as a new layer - Resize by 70 - Sharpen and place on the top left - Duplicate - Image - mirror and merge down
Open Element 7 and paste as a new layer on the left of the tag
Open Element 99 - Resize by 60 - Sharpen and place along the bottom
Open Element 25 - Resize by 70 - Sharpen and place on the bottom of the frame
Open your tube and position her in the centre
Open Element 106 - Resize by 80 - Sharpen and place on the bottom of the tube
Open Element 51 and paste as a new layer - Place on the bottom
Open Element 33 - Resize by 60 - Sharpen and place over the previous layer
Open Element 3 - Resize by 80 - Sharpen and place on the bottom - Apply Gradient Glow at the settings above

Open Paper 14 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Tag Show Off


New tag using the tube called Rhonda by Spazz 
and the PTU Matching Scrapkit Rhonda by Ginnibug Designz 


Fantasy - PTU

I am using the art of Sabine Rich which you can find HERE
I am using the PTU IB Sabine Rich 5-2 Scrapkit by ChiChi Designz which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Fritillary - Default

Open a new image 600x600
Open Mask and paste as a new layer - Rotate - 90 Left - Resize by 80 - Sharpen and place in the centre - Open Flower Sparkles and paste as a new layer in the centre
Open Heart Frame - Resize by 60 - Sharpen and place on the far right of the tag - Click inside with your  magic wand - Selections - modify - Expand by 5 - Open Paper 1 and paste as a new layer - Position - Selections - Invert - delete - select none and move under the frame- Apply fritillary at the settings above
Open Branch and paste as a new layer - Place in the centre of the heart
Open Moon - Image - Mirror - Position on the top right of the tag
Open Frame 2 - Resize by 85 - Sharpen and place in the centre - Click inside both frames with your magic wand - selections - modify - expand by 5 - open paper 3 and position so the bottom of the paper fits inside the frames - Selections - Invert - Delete - select none and move under the frame - Open Leaves - Resize by 70 - Rotate - 90 Left and place on the bottom right of the frame - Duplicate - Image - Mirror and merge down
Open Hearts - Resize by 60 - Sharpen and place in the middle of the centre frame
Open Gems - Resize by 50 - Sharpen and place on the top left - duplicate - image - mirror and merge down - Open Flower Branch - Resize by 75 - Sharpen - Image - Flip and place on the top of the frame - Open Cloud - Resize by 90 - Sharpen and place on the bottom - Duplicate - Image - Flip and merge down
Open Flower String - resize by 60 - Sharpen and place to the left
Open your tube and position her on the bottom of the tag
Open Book - Resize by 45 - Sharpen and place next to the tubes waist
Open Bird - Image - Mirror - Resize by 35 - Sharpen and place on the top right
Open Flowers and position along the bottom of the tube
Open Butterfly - Mirror and resize by 35 - Sharpen and place on the tubes knees

Open Paper 2  and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done


Tuesday, 13 May 2014

Western - PTU

I am using the art of Anna Liwanag which you can find HERE
I am using the PTU Anna Liwanag Scrapkit Bundle Pack 60 by Ladyhawwk Designs which you can find HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Frame 1 and paste as a new layer - Resize by 70 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 14 and paste as a new layer - Open Element 31 and paste as a new layer - Resize by 60 - Sharpen and place on the bottom left - Open your close up tube and position on the left of the previous layer - Move under the previous layer - Selections - Invert - Delete - Select none and move under the main frame - Change the blend mode of the tube to Luminance
Open Element 29 - Resize by 60 - Sharpen and place on the bottom right - Duplicate - image - mirror and merge down - Open Element 36 - Resize by 70 - Sharpen and place along the bottom  - Open Element 51 - Resize by 70 - Sharpen and place on the top
Open Element 5 - Resize by 60 - Sharpen and place on the far left - Duplicate - Mirror - merge down - Open Element 74 - Resize by 35 - Sharpen and place on the top left hanger - Duplicate - Image - Mirror and merge down
Open Element 64 - Image - Flip - Resize by 60 - Sharpen and place along the top
Open Element 40 - Resize by 80 - Sharpen - Mirror - Place on the top left
Open Element 26 - Mirror - Resize  by 50 - Sharpen and place on the bottom left
Open your tube and place her on the right of the tag

Open Paper 16 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done