Wednesday, 30 April 2014

Flames of Love - PTU

I am using the art of Chris Pastel which you can find HERE 
I am using the PTU Scrapkit Love Hurts by Stacie Cakes which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 97, 50, 64, 176

Open a new image 600x600
Open Swirlie and paste as a new layer - Resize by 90 - Sharpen - Image - Mirror - Place to the left - Duplicate - Image - Mirror - Flip and merge down
Open Wire Hearts - Resize by 80 - Sharpen - Place to the right - Duplicate - Image - Mirror - Flip and merge down
Open Heart Spiral and paste as a new layer - Position toward the right of the tag
Open Wire Heart and paste as a new layer - Position on the right centre
Open Frame and paste as a new layer - Place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 5 - Resize by 60 - Paste as a new layer - Open Heart Border and paste as a new layer - Position toward the top - Open your tube - Position and when happy - Duplicate and hide for now - Selections - Invert - Delete - Select none and move all under the frame
Open Butterfly 1 and paste as a new layer - Resize by 50 - Sharpen and place on the top right
Open Flame - Resize by 70 - Sharpen and place on the far right - Duplicate - Image - Mirror - Merge down - Open Bad Girl Case and paste as a new layer - Resize by 70 - Sharpen and place on the bottom left - Open Sparkles - Resize by 70 - Sharpen and place in the centre
Unhide your duplicated tube and erase the bottom bit of the tube
Open Heart 2 - resize by 50 - Sharpen - Place on the bottom left
Open Love - Resize by 45 - Sharpen and place on the bottom of the tube
Apply Radiance to your tube layers at the settings above

Open Paper 7 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Strip - PTU

I am using the art of PinUpToons which you can find HERE 
I am using the PTU PinUpToon Bundle Pack 144 by Foxy's Designz which you can find HERE 
Mask of Choice
Font of Choice

Filters Used:
Xero - Fritillary - Default

This is tut number the last tut using the pack 

Open a new image 600x600
Open Frame 3 and paste as a new layer - Resize by 70 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 6 - Open Paper 5 and paste as a new layer - Open Element 33 and paste as a new layer - Resize by 70 - Sharpen and place to the far left - Duplicate - Image - Mirror and merge down - Open your tube and position her in the centre - Duplicate and hide for now - Selections - Invert - Delete - Select none and move both under the frame - Apply Fritillary at the settings above to the paper layer - Open Element 38 and paste as a new layer - Position it in the centre - Unhide your duplicated tube and erase some of the bottom of the tube - Open Frame 2 and paste as a new layer - Resize by 80 - Sharpen and place in the centre - Click inside all 3 with your magic wand - Selections - Modify - Expand by 5 - Open Paper 8 and paste as a new layer - Open your close up tube and position on the right of the frame - Selections - Invert - Delete - Select none and move both under the frame - Duplicate the tube - Image - Mirror - merge down - Change the blend mode of the tubes to Luminance - Open Element 16 - Resize by 35 - Position on the bottom right of the middle frame - Duplicate - Image - Mirror - Merge down
Open Element 22 - Resize by 30 - Sharpen and place on the top left - Duplicate - image - mirror and merge down - Duplicate - Image - Flip and merge down
Open Element 10 - Resize by 80 - Sharpen and position on the far right - duplicate - image - mirror - merge down

Open Paper 9 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done



Steampunk Romance - PTU



I am using the art of PinUpToons which you can find HERE 
I am using the PTU PinUpToon Bundle Pack 144 by Foxy's Designz which you can find HERE 
Mask of Choice
Font of Choice

This is tut number 2 using the pack - 3 to come after this one!

This is a very quick tut 

Open a new image 600x600
Open Element 36 and paste as a new layer - Resize by 80 - Sharpen and place in the centre
Open Element 31 and paste as a new layer - Resize this by 85 - Sharpen and place on the top left of the diamond
Open Element 35 - Resize by 50 - Sharpen and place on the top left
Make the diamond layer your active layer - Selections - Select all - Float - Defloat and paste your tube to the right - Duplicate and hide for now - Selections - Invert - Delete - Select none - Unhide your duplicated tube and erase the overhanging parts
Open Element 4 - resize by 45 - Sharpen and position on the bottom of the tag
Open Element 9 and paste as a new layer - Resize by 80 - Sharpen and place in the centre right of the diamond

Open Paper 2 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Wow! - PTU

I am using the art of PinUpToons which you can find HERE
I am using the PTU PinUpToon Bundle Pack 144 by Foxy's Designz which you can find HERE
Mask of Choice
Font of Choice

This is tut number 1 using the pack - 2 n 3 to come very very shortly!

Open a new image 600x600
Open Element 30 and paste as a new layer - Resize by 80 - Sharpen and place in the centre
Open Element 11 and paste as a new layer - Resize by 80 - Sharpen and position toward the top - Open Element 17 and paste as a new layer - Resize by 65 - Sharpen and position in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 6 and paste as a new layer - Selections - Invert - Delete - Select none and move under the frame - Open Element 15 and paste as a new layer - Resize by 55 - Sharpen and place toward the bottom of the tag - Open Element 34 and paste as a new layer - Resize by 60 - Sharpen and place on the top left of the tag
Open Element 26 and paste as a new layer - Resize by 70 - Sharpen and place on the top right - Open Element 12 and paste as a new layer - Resize by 50 - Sharpen and place on the very bottom of the heart on the point - Open Element 8 and paste as a new layer - Position on the top right - Open Element 5 and paste as a new layer - Resize by 60 - Sharpen and place on the bottom of the tag - Open your tube and position in the centre
Open Element 25 - Resize by 70 - Sharpen and position on the bottom right of the tube

Open Paper 7 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Tuesday, 29 April 2014

Sweet - PTU

I am using the art of Anna Liwanag which you can find HERE
I am using the PTU Scrapkit Lilac and Linen by Hungry Hill which you can find HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Wreath and paste as a new layer - Resize by 70 - Sharpen and place in the centre
Open Grass Doodle and paste as a new layer - Resize by 80 - Sharpen - Image - Mirror and position to the left - Open Petals and paste as a new layer - Resize by 70 - Sharpen and place on the top left - Duplicate - Image - Mirror - Flip - Merge down
Open Frame 4 and paste as a new layer - Resize by 70 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 10 and paste as a new layer - Open your close up tube and position to the right - Selections - Invert - Delete - Select none and move both under the frame - Change the opacity to the tube to Overlay - Open Glitter Circle and paste as a new layer - Resize by 80 - Sharpen and position to the right over the tube - Open Starline - Resize by 60 - Sharpen and position on the top of the frame - Duplicate - Image - Flip - Merge down
Open String - Resize by 50 - Sharpen and place on the top of the frame - Duplicate - Image - Flip - Merge down - Open Forget me nots and paste as a new layer - Resize by 50 - Sharpen and place on the right of the frame - Duplicate - Image - Mirror - Merge down
Open clock and paste as a new layer - Resize by 60 - Sharpen and place on the left of the frame - Open your tube and position on the far left of the frame
Open Strap and paste as a new layer - Resize by 80 - Sharpen - Image - Mirror and position on the bottom of the tube - Open Dotty Ribbon - Resize by 60 - Sharpen and position in the centre of the previous layer - Open lilac 2 and paste as a new layer - Resize by 70 - Sharpen and place on the bottom left - Open Bouquet - resize by 50 - Sharpen and place on the bottom right

Open Paper 3 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Monday, 28 April 2014

Geek Chic - PTU

I am using the art of Spazz which you can find HERE
I am using the PTU Scrapkit Pumped Up Kicks by Scrappin Krazy Designs which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Fritillary - Default

Open a new image 600x600
Open Element 38 and paste as a new layer - Resize by 80 - Sharpen and place on the top - Duplicate and position below the original - Duplicate again and move to the bottom
Open Element 43 and paste as a new layer - Resize by 60 - Sharpen and position in the centre of the canvas - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 15 and position - Open Element 53 and position just above centre of the frame - Selections - Invert - Delete - Select none and move both under the frame - Apply Fritillary at the settings above
Open Element 35 and paste as a new layer - Position on the top left of the frame
Open Element 56 and paste as a new layer - Resize by 70 - Sharpen and place on the far right of the frame - Duplicate - image - mirror and merge down
Open Element 16 and paste as a new layer - Resize by 60 - Sharpen and place on the bottom 
Open Element 68 - Resize by 60 - Sharpen and place on the bottom left
Open Element 11 and paste as a new layer - Resize by 60 - Sharpen and place on the bottom left - Open Element 74 - Image - Mirror - Resize by 50 - Sharpen and place on the right
Open Element 52 and paste as a new layer - Resize by 45 - Sharpen and place on the bottom right - Open Element 59 and paste as a new layer - Position in the centre and toward the top
Open Element 57 - Image - Mirror - Resize by 50 - Sharpen and place on the bottom right
Open your tube and position her in the centre of the tag

Open Paper 1 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Sunday, 27 April 2014

Dark Thoughts - PTU

I am using the art of Tiffany Toland-Scott which you can find HERE 
I am using the PTU Tiffany Toland-Scott Package 34 Scrapkit Bundle by Ladyhawwk Designs which you can find HERE 
Font of Choice

This is tut 3 of 3 using the bundle

Open a new image 600x600
Open Element 60 and paste as a new layer - resize by 80 - Sharpen - Image - Flip and place on the top of the canvas
Open Frame 2 and paste as a new layer - Resize by 80 - Sharpen and place in the centre - Click inside with your magic wand - Selections - modify - expand by 5 - Open paper 14 - Image - Mirror and paste as a new layer - Position so the moon is in the top left of the frame - Open Element 9 and paste as a new layer - Resize by 70 and position on the bottom left of the frame - Open Element 65 and paste as a new layer - place on the bottom half - Open Element 10 and paste as a new layer - Resize by 50 and place on the bottom of the paper - Duplicate and position above the original - Open Element 15 and paste as a new layer - Resize by 60 - Sharpen and place on the bottom right - Selections - Invert - Delete - Select none and move all under the frame - Open Element 65 and paste as a new layer - Position on the bottom right of the frame -Duplicate - Image - Mirror and merge down - Open Element 9 and paste as a new layer - Place on the left of the tag
Open Element 28 and paste as a new layer - Resize by 35 - Sharpen and place on the right above the flowers - open frame 2 and paste as a new layer - Resize by 60 - Sharpen and place in the centre - Click inside with your magic wand - Selections - modify - expand by 5 - Open the close up tube and position to the right - Selections - Invert - Delete - Select none and move under the frame - Change the opacity to Luminance
Open Element 7 and paste as a new layer - Place on the bottom left - Duplicate - Image - rotate - free rotate - 90 left
Open Element 36 - Resize by 70 - Sharpen and place on the bottom left - Open Element 1 - Image - Mirror - Resize by 70 and place in the centre
Open Element 8 - Resize by 60 - Sharpen - place on the bottom and apply a square mask of choice - merge down - Open your tube and paste as a new layer - resize her if needed and position to the bottom right of the tag

 Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Magical - PTU

I am using the art of Tiffany Toland-Scott which you can find HERE 
I am using the PTU Tiffany Toland-Scott Package 34 Scrapkit Bundle by Ladyhawwk Designs which you can find HERE 
Mask of Choice
Font of Choice

This is tut 2 of 3 using the bundle

Open a new image 600x600
Open Element 58 and paste as a new layer - Resize by 60 - Sharpen - Image - Flip and move to the top of the canvas
Open Frame 6 and paste as a new layer - Resize by 75 - Sharpen and place in the centre - click inside with your magic wand - Selections - modify - Expand by 5 - Open Paper 4 and paste as a new layer - Selections - Invert - Delete and select none
Open Element 31 - Resize by 70 - Sharpen and place on the bottom right - Duplicate - Image - Mirror and merge down
Open Element 16 and paste as a new layer - Resize by 80 - Sharpen and place on the bottom left - Duplicate - Image - mirror and merge down
Open Element 26 and paste as a new layer - Resize by 60 - Sharpen and place on the bottom left
Open Element 14 - Paste as a new layer and position on the right - Move the 2 previous layers above the column layer
Open Element 2 and paste as a new layer - Resize by 80 - Sharpen and position on the bottom left - Duplicate - Image - Mirror - Flip - merge down
Open Element 11 and paste as a new layer - Place on the top centre 
Open your tube and resize if needed - Position her on the right of the tag

Open Paper 2 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Fairy Green - PTU

I am using the art of Tiffany Toland-Scott which you can find HERE
I am using the PTU Tiffany Toland-Scott Package 34 Scrapkit Bundle by Ladyhawwk Designs which you can find HERE
Mask of Choice
Font of Choice

This is tut 1 of 3 using the bundle

Open a new image 600x600
Open Frame 1 and paste as a new layer - Resize by 70 - Sharpen and position toward the bottom of the tag - Open Element 12 - Image - Flip - Resize by 70 - Sharpen and place on the top of the frame - Open Element 66 - Image - Flip and resize by 50 - Sharpen and position on the bottom left of the previous layer
Open Element 22 and paste as a new layer - Resize by 80 and position on the far right of the tag
Open Element 4 and paste as a new layer - Resize by 75 - Sharpen and place on the bottom 
Open Element 56 and paste as a new layer - Resize by 80 - Sharpen and position on the bottom left of the tag - Open Element 57 - Image - Mirror - Resize by 40 - Sharpen and place in front of the previous layer - Open Element 39 and paste as a new layer - Resize by 40 - Sharpen and place on the far top right of the tag
Open Element 17 and resize by 80 - Sharpen and place on the bottom right
Open Element 55 - Image - Mirror - Resize by 80 - Sharpen and place on the bottom right
Open Element 51 - Resize by 35 - Sharpen and position on top of the previous layer
Open your tube and resize her if needed - remember to sharpen when you do - Place her in the centre of the tag - Open Element 8 and paste as a new layer - Resize by 70 - Sharpen and place on the bottom of the tag - Erase the bottom part of the tube that sticks out underneath
Open Element 37 - Resize by 60 - Sharpen and place below the envelope layer - Move to the top right so the window is over the flower
Open Element 18 and paste as a new layer - Resize by 70 - Sharpen and place on the bottom right - Duplicate - Image - Mirror - Duplicate and resize by 80 - Sharpen and duplicate and mirror - Merge these 4 layers together

Open Paper 9 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Saturday, 26 April 2014

Sweetness - PTU

I am using the art of Enamorte which you can find HERE
I am using the PTU IB Enamorte 30-1 by Abstract Creations which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Eye Candy - Gradient Glow - Thin - Brown

Open a new image 600x600
Open Element 6 and paste as a new layer - Resize by 85 - Sharpen and position in the centre - Open Element 1 and paste as a new layer - Resize by 80 - Sharpen and position on the bottom half of the previous layer - Open f2 - Resize by 70 - Sharpen and place in the centre
Open Element 4 - Image - Rotate - Free Rotate - 90 Left and position on the top right of the frame - Duplicate - Image - Mirror and merge down
Open Element 2 - Resize by 70 - Sharpen and Mirror - Position on the bottom right of the frame - Duplicate - Image - Mirror - Flip and merge down
Open Element 20 - Resize by 60 and place along the bottom
Open Element 11 - Position on the bottom of the tag - Duplicate - Image - Flip and merge down - Open Element 16 and paste as a new layer - Resize by 35 - Sharpen and place on the spoon - Open f1 and paste as a new layer - Resize by 80 - Sharpen
Open Element 17 - Resize by 65 - Sharpen and place on the bottom left - Duplicate - Image - Mirror and merge down when happy
Open your tube and paste as a new layer - Position to the right of the centre
Open Element 10 and resize by 40 - Sharpen and position to the bottom left of the tube
Open Element 13 and paste as a new layer - Resize this by 60 - Sharpen and place on the left of the teddy bear
Open wa1 and paste as a new layer - Resize by 80 - Sharpen and place on the bottom half of the tube - Use gradient glow at the settings above

Open Paper 3 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Friday, 25 April 2014

Imagine That - PTU

I am using the art of Enamorte which you can find HERE 
This is her April Bonus Tube so be quick if you want her!
I am using the PTU IB Enamorte April Bonus Tube Scrapkit by Rebel Dezigns which you can find HERE - She has made 2 mini kits matching the 2 colours from the tubes!!
Mask of Choice
Font of Choice

Open a new image 600x600
I am using the Pink/Purple Folder for this tag
Open Element 2 and paste as a new layer - Resize by 80 - Sharpen and place in the centre
Open Element 14 and paste as a new layer - Resize by 80 - Sharpen and place toward the top
Open Frame 2 and paste as a new layer - Resize by 80 - Sharpen and place in the centre - Click inside both parts with your magic wand - Selections - Modify - Expand by 5 - Open Paper 5 - Resize by 60 - Sharpen - Open your tube and place her to the right - Duplicate and hide for now - Selections - Invert - Delete - Select none and move both under the frame - Unhide the duplicated tube and erase the bottom part of her
Click on the paper layer and open element 7 - Paste as a new layer and resize by 75 - Sharpen
Back to the top now!
Open Element 15 and paste as a new layer - Resize by 80 - Sharpen and position on the far left - Duplicate - Image - Mirror and merge down
Open Element 16 and paste as a new layer - Resize by 55 - Sharpen and place on the bottom of the frame - Open Element 12 - Resize by 80 - Sharpen and place over the previous layer
Open wa and resize by 80 - Sharpen and place on the bottom
Open Element 17 and paste as a new layer - Image - Mirror - Resize by 50 - Sharpen and place on the top left - Angle slightly using your deform tool

Open Paper 3 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Thursday, 24 April 2014

Raindrops - PTU


I am using the art of Trinita which you can find HERE
I am using the PTU Scrapkit Puddle Jumper by Debs Designs which you can find HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Frame 1 and paste as a new layer - Resize by 80 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 3 and paste as a new layer - Open Swirl and paste as a new layer - Place in the centre - Open Fence - resize by 80 - Sharpen and position toward the bottom - Selections - Invert - Delete - Select none and move all underneath the frame
Open Rainbow - Resize by 85 - Sharpen and position toward the top
Open Birdies - Image - Mirror - Resize by 60 - Sharpen and place them on the top left
Open Doddle 1 and paste as a new layer - Resize by 75 - Sharpen and place on the bottom right - Duplicate - Image - Mirror and flip - merge down when happy
Open Spring Fairy - Image - Mirror - Resize by 65 - Sharpen and place her on the bottom left
Open Butterfly and position on the centre of the rainbow layer
Open Bird 3 and resize by 80 - Sharpen and place on the top right of the tag
Open Grass 1 and paste as a new layer - Position along the bottom of the frame
Open your tube and paste as a new layer - Position her in the centre and erase parts of her legs that stick out underneath the grass
Open Raindrops 2 - Resize by 80 - Sharpen and position toward the bottom
Open Ladybug and paste as a new layer - Resize by 30 - Sharpen and place on the bottom left

Open Paper 2 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Cute Summer - PTU

I am using the art of Elias Chatzoudis which you can find HERE
This is a FTU Tube!
I am using the PTU Scrapkit Sweet Pea by AmyMarie which you can find HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 98 and paste as a new layer - Place in the centre
Open Element 93 and paste as a new layer - Resize by 80 - Sharpen and place in the centre
Open Element 52 - resize by 70 - Sharpen and position in the centre - Click inside with your magic wand - Selections - modify - Expand by 5 - Open Paper 9 and paste as a new layer - Open Element 56 and paste as a new layer - Position towards the bottom - Selections - Invert - Delete - Select none and move under the frame
Open Element 25 and paste as a new layer - Resize by 80 and place in the centre
Open Element 81 - Paste as a new layer and position on the top of the frame - Use your deform tool and angle it so it fits the frame better
Open Element 131 and paste as a new layer - Resize by 70 - Place on the top of the tag - Duplicate - Image - Flip and merge down
Open Element 108 - Resize by 80 - Sharpen and place on the bottom right
Open Element 42 and paste as a new layer - Resize by 60 - Sharpen - Position on the bottom
Open your tube and place her in the centre
Open Element 47 and paste as a new layer - resize by 70 - Sharpen and position on the far right - Duplicate - Image - Mirror and merge down
Open Element 1 - Resize by 75 - Sharpen - Image - Mirror and position along the bottom - Use your deform tool to angle it so it fits the frame
Open Element 20 - Resize by 75 - Sharpen and place on the grass layer
Open Element 74 and paste as a new layer - Resize by 60 - Sharpen and position on the bottom left - Duplicate and place above the original - Merge down
Ooen Element 122 - Image - Mirror - Resize by 30 - Sharpen - Position on top of the birdbath

Open Paper 3 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Wednesday, 23 April 2014

Be Goth - PTU

I am using the art of Anna Liwanag which you can find HERE
I am using the PTU IB Anna Liwanag 48-3 Scrapkit by Honored Scraps which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 185, 155, 182, 64 and then repeat
Xero - Fritillary - 5, 30, 10, 24

Open a new image 600x600
Open Element 6 and paste as a new layer - Place in the centre
Open Element 10 - Resize by 80 - Sharpen and position just below centre - Duplicate - Image - Flip and merge down when happy
Open Element 14 and paste as a new layer - Resize by 60 - Sharpen and position toward the top
Open Frame 1 and paste as a new layer - Resize by 70 - Sharpen and place in the centre - Click inside with your  magic wand - Selections - Modify - Expand  by 5 - Open Paper 3 and paste as a new layer - Selections - Invert - Delete - Select none and move under the frame - Apply Fritillary  at the setting above
Open Element 17 and paste as a new layer - Resize by 70 - Sharpen and place on the far right of the frame - Duplicate - Image - Mirror and merge down
Open Element 12 and paste as a new layer - Resize by 60 - Sharpen and place on the top left of the frame - Duplicate - Image - mirror - image - flip and merge down
Open your tube and place her in the centre of the tag
Open Element 19 and paste as a new layer - Resize by 60 - Sharpen and position on the bottom right of the frame - Duplicate - Position above left to the original - merge down - Duplicate - Image - Mirror and merge down - Open Wordart 1 and paste as a new layer - Resize by 50 - Sharpen and place on the bottom over the grass
Open Element 8 and paste as a new layer - Resize by 80 and place on the top left - Duplicate - Image - Mirror and merge down

Open Paper 6 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Tuesday, 22 April 2014

Hot - PTU

I am using the art of Rene Kunert which you can find HERE
I am using the PTU IB Ted Hammond 45-2 Scrapkit by Foxy's Designz which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Eye Candy - Gradient Glow - Fat White Twice

Open a new image 600x600
Open Element 8 - Resize by 85 - Sharpen and place on the bottom - Duplicate - Image - Flip and merge down - Open Element 2 and paste as a new layer - Resize by 80 - Sharpen and place in the centre
Open Frame 1 and paste as a new layer - Image - Rotate - Free Rotate - 90 Left and resize by 75 - Sharpen and place slightly above centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open paper 4 and paste as a new layer - Resize by 60 - Open Element 14 - Resize by 80 - Sharpen and positon toward the top of the frame - Open Element 7 and paste as a new layer - Position sightly above tge bottom of the frame - Selections - Invert - Delete - Select none and move all under the frame - Change the blend mode of the lips to Lighten
Open Element 19 - Resize by 70 - Sharpen and place on the top of the frame - Duplicate - Rotate - Free Rotate - 90 Left and place on the left of the frame - Duplicate - Image - Mirror and merge down - Erase the overhanging parts that stick out under the frame and apply Gradient Glow at the settings above
Open Element 5 and paste as a new layer on the bottom of the tag
Open Element 16 - resize by 50 - Sharpen and position under the city scene layer to the right
Open Element 18 - Resize by 70 - Sharpen and place on the bottom left
Open Element 4 and paste as a new layer - Position towards the bottom of the tag
Open Element 6 - Image - Mirror - Resize by 90 - Sharpen and place to the bottom left
Open Element 9 - Resize by 70 - Sharpen and position toward the right of the tag
Open your tube and place her on the bottom of the tag - to the right slightly

Open Paper 6 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done


3 Show off Tags using BabyCakes Anna Liwanag Bundle Pack 59!





3 Tags using the gorgeous and packed Anna Liwanag Bundle Pack 59 by Babycakes!!! Absolutely loved working with this, used as many elements as i possibly could!!

Monday, 21 April 2014

Beach Fun - PTU

I am using the art of Alex Prihodko which you can find HERE
I am using the PTU Scrapkit Lighthouse Dreams by PO Concept which you can find HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 82 and paste as a new layer - Resize by 80 - Sharpen and place in the centre - Open Element 6 and paste as a new layer over the previous one
Open Element 49 and paste as a new layer - Position on the bottom left of the frame
Open Element 51 and paste as a new layer - Resize by 70 - Sharpen - Position on the bottom of the boat
Open Element 109 and paste as a new layer - Resize by 60 and position toward the bottom
Open Element 37 and paste as a new layer - Resize by 60 - Sharpen and position toward the top
Open Element 47 - Resize by 80 and place on the far right of the tag
Open Element 42 and paste as a new layer - Resize by 90 - Sharpen  - Place on the bottom right - Duplicate - Image - Mirror and merge down when happy
Open Element 59 and paste as a new layer - Resize by 80 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 18 and paste as a new layer - Open Element 165 - Resize by 60 and position on the top right of the frame - Duplicate - Image - Mirror - Merge down - Selections - Invert - Delete - Select none - Move the paper to the bottom and move the string layer above it
Open Element 97 and paste as a new layer - Resize by 40 - Sharpen and place on the bottom right - Duplicate - Image - Mirror and merge down when happy
Open Element 87 - Image - Mirror - Resize by 60 - Sharpen and place on the bottom left
Open Element 117 and paste as a new layer - Resize by 70 - Sharpen and place on the bottom
Open Element 62 - Resize by 70 - Sharpen and place on the bottom far left - Duplicate and position just lower than the original - Merge down - Duplicate - Image - Mirror - merge down
Open Element 34 and paste as a new layer - Resize by 90 - Sharpen and place on the bottom
Open Element 8 - Image - Mirror - Resize by 40 - Sharpen and place on the bottom right
Open Element 103 - Resize by 85 - Sharpen and place below the previous layer
Open Element 122 and paste as a new layer - Resize by 70 - Sharpen and place on the right of the previous layer - Open Element 3 - resize by 50 - Sharpen and place on the centre far right - Duplicate - Image - Mirror and place on the top left
Open your tube and paste as a new layer - Place in the centre of the tag
Open Element 24 - Resize by 70 - Sharpen and place on the top left - Duplicate - Image - Mirror and merge down

Open Paper 13 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done


Late Easter - PTU

I am using the art of PinUpToons which you can find HERE
I am using the PTU Scrapkit A Bit Easter Mini by Schnegge Scraps which you can find HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Frame 1 and paste as a new layer - Resize by 70 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 4 and paste as a new layer - Open Element 11 and paste as a new layer - Resize by 50 - Sharpen and place in the top right - Duplicate - Image - Mirror and merge down
Open Element 26 and paste as a new layer - Resize by 80 - Sharpen and position just below the top of the frame
Open Element 21 and paste as a new layer - Resize by 60 - Sharpen and place on the right
Open Element 18 and paste as a new layer - Resize by 45 - Sharpen and place on the bottom right - Open Element 16 - Image - Mirror - Resize by 45 - Sharpen and place below the previous layer - Open Element 17 - resize as before - Place on the bottom right - Duplicate - Image - Mirror and merge down
Open Element 30 - Image - Mirror - Resize by 60 - Sharpen and place on the bottom left
Open Element 23 and paste as a new layer - Resize by 60 - Sharpen and place over the previous layer - Open your tube and place her in the centre

Open Paper 1 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Sunday, 20 April 2014

Easter Welcome - PTU

I am using the art of Trinita which you can find HERE 
I am using the PTU Scrapkit Hop into Spring by PinkParadox Productions which you can find HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 189 and paste as a new layer - Resize by 60 - Sharpen and place on the top left
Open Frame 10 - Resize by 65 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 4 - Open Paper 21 and paste as a new layer - Resize by 60 - Sharpen and position - Open Element 29 - Resize by 75 - Sharpen and position on the far right centre of the paper - Selections - Invert - Delete - Select none and move under the frame
Open Element 154 and paste as a new layer - Resize by 55 - Sharpen and place on the bottom of the frame - Duplicate - Image - Mirror and Flip - Merge down
Open Element 24 and paste as a new layer - Resize by 45 - Sharpen - Place on the left of the frame - Duplicate - Image - Mirror - Flip - merge down
Open Element 142 and paste as a new layer - Resize by 45 - Sharpen and place on the bottom left - Open Element 150 - Resize by 65 - Sharpen and place on the bottom right - Duplicate - Image - Mirror and Merge down
Open Element 23 and paste as a new layer - resize by 35 - Sharpen and place on the top right
Open Element 177 and paste as a new layer - Resize by 80 - Sharpen and place along the bottom - Open Element 1 and paste as a new layer - Resize by 50 - Sharpen and place on the bottom right - Open your tube and place her in the centre
Open Element 107 and paste as a new layer - Resize by 75 - Sharpen and place above the grass
Open Element 18 - Image - Mirror - Resize by 40 - Sharpen and place on the bottom right
Open Element 3 - Resize by 25 - Sharpen and place on the bottom left - Duplicate and place next to the original - merge down - Open Element 98 and paste as a new layer - Resize by 45 - Sharpen and position between the fence parts - See my tag for placement 

Open Paper 23 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Saturday, 19 April 2014

Perfect Purple - PTU


I am using Violette by VeryMany which you can find HERE
I am using the PTU Scrapkit Spring Treasures by PinkParadox Productions which you can find HERE
Font of Choice

Open a new image 600x600
Open Frame 11 and paste as a new layer - Resize by 70 - Sharpen and place on the right 
Open Frame 3 and paste as a new layer - Resize by 80 - Sharpen and position on the left
Open Element 89 and paste as a new layer - Resize by 55 - Sharpen and place along the bottom
Open Element 45 - Resize by 45 - Sharpen and place on the bottom right
Open Element 74 - Image - Mirror and Resize by 45 - Sharpen and position slightly above the bottom of the canvas
Open Element 115 and paste as a new layer - Resize by 50  - Sharpen and position on the top of the wall - Open Element 113 and paste as a new layer - Resize this by 35 - Sharpen and place along the bottom of the wall
Open Frame 6 and paste as a new layer - Resize by 70 - Sharpen and place on the top left - Click inside with your magic wand - Selections - Modify - Expand by 5 and open paper 12 - Open a close up of your tube and position her in the left of the frame - When happy - Selections - Invert - Delete - Select none and move both under the frame - Change the blend mode of the tube to Soft Light - Keeping on that layer - Open Element 116 and paste as a new layer - Resize by 30 - Sharpen and position along the top left
Open Element 106 and paste as a new layer - Resize by 45 - Sharpen and position on the far top left - Open Element 107 - Resize by 45 - Sharpen and place on the bottom left
Open Element 39 - Image - Mirror - Resize by 60 - Sharpen and place on the bottom right
Open Element 118 - resize by 30 - Sharpen and position on the bottom centre of the canvas
Open Element 112 - resize by 70 - Sharpen and place on the bottom left
Open Element 94 and paste as a new layer - Resize by 56 - Sharpen and place on the bottom centre - Open Element 3 - Image - Mirror - Resize by 35 - Sharpen and place on the right of the previous layer - Open Element 126 and paste as a new layer - Resize by 50 - Sharpen and place in the centre - Open your tube and position her in the centre of the canvas
Open Element 13 - Resize by 50 - Sharpen and position on the left on top of the flowers

Add drop shadows to your layers - Merge Visible - Add correct copyright and licence information - Merge down - Save as a png - Add your name - Save again - Done

Friday, 18 April 2014

KitKat - PTU

I am using the art of Spazz which you can find HERE
I am using the PTU Scrapkit KitKat made to match the tube by Niqui Designs which you can find HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 16 and paste as a new layer in the centre
Open Element 60 and paste as a new layer - Resize by 70 - Sharpen and place over the previous layer
Open Element 38 - Resize by 80 - Sharpen and place in the centre - Click inside with your magic wand - Selections - modify - Expand by 5 - Open Paper 1 and paste as a new layer - Open a close up of your tube and position in the top left - Duplicate and position on the right - Selections - Invert - Delete - Select none and move all under the frame - Merge the tube layers together and change the blend mode to Burn
Open Element 19 and paste as a new layer - Place in the centre
Open Element 27 - Resize by 65 - Sharpen and place on the top of the frame - Use your deform tool to angle it so it fits - Duplicate and Flip - Again use your deform tool to angle it
Open Element 46 - resize by 60 - Sharpen and place on the left of the frame - Duplicate - Image - Mirror and angle it - merge down when happy
Open Element 36 - Resize by 35 - Sharpen and place on the bottom right of the frame
Open Element 23 - Resize by 80 and paste over the layers
Open Element 42 - Resize by 66 - Sharpen and place in the centre
Open Element 37 - Resize by 60 - Sharpen and place on the bottom right - Duplicate - Image - Mirror and merge down - Open Element 5 - Resize by 45 - Sharpen and place on the left of the previous layer on the right - Open Element 50 - Resize by 25 - Sharpen and place on the bottom left - Duplicate and position above the original - Merge down
Open your tube and position her in the centre of the tag
Open Element 40 and paste as a new layer - Resize by 45 - Sharpen and place on the top right - Duplicate - Image - Mirror and merge down when happy

Open Paper 12 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Thursday, 17 April 2014

Emo Chic - PTU

I am using the art of Enamorte which you can find HERE
I am using the PTU Scrapkit Emo Chaos by Honored Scraps which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Fritillary - 5, 30, 31, 21
Xero - Radiance - 128, 76, 128, 70

Open a new image 600x600
Open Element 45 and paste as a new layer - Resize by 70 - Sharpen and place on the bottom - Duplicate - Image - Flip and Merge down when happy
Open Element 10 and paste as a new layer - Resize by 70 - Sharpen - Place in the centre of the previous layers - Duplicate - Image - Flip - Merge down
Open Element 33 and paste as a new layer - Place in the centre
Open Element 35 and paste as a new layer - Resize by 90 - Sharpen and place in the centre
Open Frame 1 and paste as a new layer - Resize by 60 - Sharpen - Place in the middle - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 1 and paste as a new layer - Open Paper 2 as a new layer - Selections - Invert - Delete on both papers and move them under the frame - Change the blend mode of the purple paper to Color and apply Fritillary at the settings above - Keeping on the paper layer - Open Frame 7 and paste as a new layer - Resize by 50 - Sharpen and place in the centre
Open Element 8 and paste as a new layer - Place on the bottom of the frame - Erase the bits that stick out on either side of the frame
Open Element 37 and paste as a new layer - Resize by 80 - Sharpen and place along the top
Open Frame 6 - Resize by 50 - Sharpen and place over the top of the elements
Open Element 30 and paste as a new layer - Resize by 40 - Sharpen and place on the top left - Duplicate and place in the centre - Merge together - Duplicate - Image - Mirror - merge down
Open Element 25 - Resize by 25 - Sharpen and place underneath the flower on the top left - Duplicate and place underneath the original - merge down - Duplicate - Image - Mirror
Open Element 44 - resize by 50 - Sharpen and place on the top centre
Open your tube and position her in the centre of the tag
Open Element 59 and paste as a new layer - Resize by 60 - Sharpen and place on the bottom right - Duplicate - Image - Mirror and merge down
Open Element 22 and paste as a new layer - Resize by 25 - Sharpen and place on the far right centre of the frame - Duplicate and place under the original - Duplicate - Image - Mirror - merge down 
Open Element 13 - Resize by 25 - Sharpen and place on the right on top of the ribbon

Open Paper 8 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done


Monday, 14 April 2014

Sweet Easter - FTU

I am using the art of PinUpToons which you can find HERE
I am using the FTU Scrapkit Bunny Confections by Horseplays Pasture Designs which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Fritillary - 5, 30, 10, 27

Open a new image 600x600
Open Element 56 - Image - Flip and place in the centre
Open Element 11 and paste as a new layer - Resize by 80 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 8 and paste as a new layer - Open your close up tube and position on the bottom right - Duplicate and place on the top left -  merge these down - Selections - Invert - Delete - Select none and move all under the frame - Apply Fritillary on the paper layer at the settings above - Change the blend mode of the tubes to Luminance L - Staying on the paper layer - Open Element 28 and paste as a new layer in the centre of the paper 
Open Element 43 and paste as a new layer - Resize by 70 - Sharpen and place on the centre right - Open Element 15 and paste as a new layer - Place on the top right
Open Element 54 and paste as a new layer - Resize by 90 - Sharpen and place in the centre
Open Element 23 and paste as a new layer - Resize by 70 - Sharpen and place on the bottom left
Open your main tube and place her in the centre of the tag
Open Element 10 and paste as a new layer - Resize by 70 - Sharpen - Place on the bottom right
Open Element 17 - Resize by 50 - Sharpen and place on the right of the easter sign on the left
Open Element 52 - Resize by 50 - Sharpen and place on the left of the egg on the right
Open Element 1 - resize by 60 - Sharpen and place on the bottom right in the centre
Open Element 57 and paste as a new layer - Place along the bottom of the tag

Open Paper 4 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done


Class - PTU

I am using the art of Enamorte which you can find HERE
This is her August 2013 Bonus Tube
I am using the PTU IB Enamorte August 2013 BT Scrapkit by Ladyhawwk Designs which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 128, 50, 128, 82

Open a new image 600x600
Open Element 7 and paste as a new layer - Resize by 80 - Sharpen and position on the bottom - Duplicate - Image - Flip - Mirror and merge down
Open Element 17 and paste as a new layer - Resize by 80 - Sharpen and place along the bottom - Open Frame 2 and paste as a new layer - Resize by 60 - Sharpen and position on the top centre of the tag - Open Element 30 and paste as a new layer - Resize by 80 - Sharpen and place on the top - Duplicate - Image - Flip - Merge down
Open Frame 4 and paste as a new layer - Resize by 70 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 5 and paste as a new layer - Open your close up tube and place her in the frame - When happy - Selections - Invert - Delete - Select none and  move under the frame - Change the blend mode of the tube to Luminance L
Open Element 9 and paste as a new layer - Resize by 60 - Sharpen and place on the bottom of the frame - Open Element 26 - Resize by 80 - Sharpen and place underneath the previous layer - Open Element 8 - Image - Mirror - Resize by 55 - Sharpen - Place on the bottom left of the frame - Duplicate - Image - Flip and merge down
Open Element 15 - Image - Mirror - Resize by 80 and place on the right
Open Element 12 and paste as a new layer - Place on the left of the tag
Open Element 23 - Resize by 60 - Sharpen and place in the centre
Open Element 20 - resize by 70 - Sharpen and place on the top of the frame - Duplicate - Image - Flip and merge down when happy
Open your main tube and place her on the right of the tag - Apply Radiance at the settings above

Open Paper 6 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done

Sunday, 13 April 2014

Inspire Me - PTU

I am using the art of Akkasshaa which you can find HERE
I am using the PTU Scrapkit Goth Inspired by Rebel Dezigns which you can find HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open frame 2 and paste as a new layer - Resize by 80 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 10 and paste as a new layer - Selections - Invert - Delete - Select none and move under the frame
Open Element 12 and paste as a new layer - Resize by 70 - Sharpen and place on the top right - Open Element 22 and paste as a new layer - Resize by 75 - Sharpen and place on the bottom right - Duplicate - Image - Mirror - Flip and merge down
Open Frame 1 and paste as a new layer - Resize by 60 - Sharpen and place in the centre - Click inside with your magic wand - Selections - Modify - Expand by 5 - Open Paper 15 and paste as a new layer - Selections - Invert - Delete - Select none and move under the frame
Move the vines above the paper layer
Open Element 26 - Resize by 50 - Sharpen and place on the left of the tag
Open Element 36 and paste as a new layer on the bottom of the tag
Open Element 49 and paste as a new layer - Position above centre
Open Element 57 and paste as a new layer - Resize by 60 - Sharpen and place on the bottom of the frames - Duplicate - Image - Flip - Mirror - Position on the top of the frames and merge down when happy
Open Element 7 and paste as a new layer - Position on the top right
Open Element 58 and paste as a new layer - Resize by 45 - Sharpen and position on the bottom right - Duplicate and resize by 80 - Sharpen and position on the left of the previous layer and merge these together - Open Element 43 and paste as a new layer - Place on the bottom left of the frame - Open your tube and position her in the centre
Open Element 27 - Resize by 80 - Use your deform tool to straighten it out and place on the bottom of the tube - Erase the parts of the leg that sticks out from underneath the ribbon

Open Paper 17 and paste as a new layer - Send to the bottom and apply a mask of choice -  merge group - Add drop shadows to your layers - Merge visible
Add correct copyright and licence information - merge down
Save as a png - Add your name - Save again - Done